Laminar Flow Cabinet Dealers in Babyal, Ambala

• Application: In Laboratory
• Voltage: 220V
• Condition: New
• Power Source: Electric
• Feature: Easy To Install, Portable, Strong Construction
• Frequency: 50 Hz

• Material: Stainless Steel
• Application: In Laboratory
• Feature: Durable, Easy To Install
• Power Source: Electric
• Warranty: 1year

Our company is engaged in the manufacturing of varied range of laminar air flow horizontal equipment, which is known for their best quality performance and the durability it contains. Our range of laminar air flow horizontal have the following features: It work-bench made of thick ply-board covered with stainless steel sheetHEPA Filter provided vertically on back of the work bench horizontallyBlowers, motor and pre-filters fitted in lower portion of the cabinet Apart from that, our range of products is available in the following specificationsLAFH-01 Working area size 60 x 60 x 60 cm.LAFH-02 Working area size 90 x 60 x 60 cm.LAFH-03 Working area size 120 x 60 x 60 cm.LAFH-04 Working area size 180 x 60 x 60 cm. ALTERNATIVE OPTIONSComplete Structure made of stainless steelStructure made of M.S. with S.S. work bench

We are the prominent Laminar Air Flow Cabinet Manufacturer, Exporter and Supplier in Amabala Cannt., Haryana. These Laminar Air Flow Cabinets are made out of best quality board & all exterior surfaces covered with laminated mica sheet. This Laminar Air Flow Cabinet is fitted with safety attachments of international standard. Also, our Laminar Air Flow Cabinet can be obtained at market leading prices.Attributes : Work table is made of mica top/stain finish S.S. Table top Complete with hepa filter & pre filters motor blower, static pressure manometer, cock for gas, air or vacuum line Front & side doors are made of plexiglas transparent thick sheet duly farmed. Built in U.V. tube work table is illuminated by fluorescent light Two legs table top and two table supports are detachable & can be taken out & fixed within minutes, front door can be kept full open/half open, fully closed as desired

• Material: Stainless Steel
• Application: In Laboratory
• Voltage: 220V
• Power Source: Electric
• Feature: Easy To Install, Portable
• Dimention of the Working Area: 2’x2’x2, 3’x2’x2’, 4’x2’x2’ INCH

The complete structure is made of stainless steel (Grade-304 20g) sheet all over Environmental air is drawn by a centri-balanced blower unit through pre filters and is thrown to work chamber through high efficiency HEPA filters retaining  99.97% particular and Biological contaminants. Table top is covered with stainless steel sheet . front door is collapsible type & side panels are  fixed and made of clear thick Plexi –glass or transparent polycarbonate. Complete with U.V. Tube, fluorescent Tube Light, Gas cock & manometer. Vertical Same Specification : But the air drawn vertically on the work stage , An exhaust system can be provided(optional) at the bottom of the unit to throw the air outside the work place. To work on 220/230 V AC 50 HZ.

We have in stock premium Horizontal Laminar Flow Cabinet and make it available at the disposal of the buyers from across the globe in time-efficient and safe way. We are bracketed with the chief Manufacturers, Exporters, and Suppliers of Horizontal Laminar Flow Cabinet from Haryana, India. This Flow Cabinet, we offer, is 100% compliant with the international standards of quality. It is renowned for providing greater localized control, especially to the processes that require intensive measures to be taken care of. Details : The cabinets are fabricated from thick boards that are duly covered with stainless steel sheets/cladsThe worktable is made of thick clad at topSide panels are made of thick transparent flexi-glass, duly framed The unit is fitted with pre-filter, which draws air through it and pass air through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with Cold DOP and 99.97% with hot DOP; thus, retaining all air-biome particles of size 0.3 micron and largerUsing a dynamic machine, the blower and motor assembly is statically and dynamically balancedESE MARKED Motor of 1/5 H.P. capacity operates with minimum noise levelThe working area is illuminated by fluorescent lighting, fitted to the unitHeight of the working table provides comfortable �SIT DOWN� working position for the operation to work on 220/230 volts A.C. supplySupplied complete with sun mica Table top, HEPA filters, pre-filter and fluorescent illumination

• Material: Stainless Steel
• Application: In Laboratory
• Feature: Durable, Easy To Install
• Voltage: 110V
• Power Source: Electric
• Warranty: 1year

• Voltage: 220 V
• External Size: 1310*750*2000mm
• Internal Size: 1200*645*610mm
• Work Surface Height: 720mm
• Display: LCD
• Noise: Less than 60 dB
• Consumption: 400W
• Gross Weight: 170kg
• Frequency: 50Hz

Features : Motor: ¼ hp motor with centrifugal blower assembly Filtration: through Hepa and pre filter Fitted with ultra violet tube Fluorescent light illumination Manometer Gas cock assembly Thick acrylic front and side panels Outer body made of thick mild steel duly powder quoted Platform made of stainless steel

• Type: Automatic
• Material: Stainless Steel
• Application: In Laboratory
• Voltage: 220V
• Power Source: Electric
• Feature: Durable, Easy To Install, Strong Construction
• Warranty: 1 Year

Laminar flow principle involves double filtration of air through coarse pre- filters (upto 5 microns) and Hepa filter (down to 0.3 microns) for filtration of biological and particulate contaminants. A constant uni-directional air flow is drawn from atmosphere and passed through pre and hepa filters on the work surface. Fabricated out of reinforced ply board which is clad in from out side laminated sheet and inner exposed areas are finished in epoxy paint. Table top covered with non-glaring laminated sheet or stainless steel sheet (optional). Side panels are fixed and are made out transparent acrylic sheet. The front door is folding type and made of thick acrylic sheet. (optional) Stand is built in type or detachable. Blower unit has AU or equivalent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable UV tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been installed.Two way gas tap for gas line has also been provided.

We are offering horizontal laminar air flow cabinet. laminar flow principle involves double filtration of air through coarse pre-filter (up to 5 microns) and hepa filter (down to 0.3 microns) for filtration of biological and particulate contaminants. A constant unidirectional air flow is drawn from atmosphere and passed through pre and hepa filters on the work surface. Fabricated out of reinforced ply board which is clad in from out side in laminated sheet and inner exposed areas are finished in epoxy paint. Table top covered with non glaring laminated sheet or stainless steel sheet. Side panels are fixed and are made out of transparent acrylic sheet. The front door is folding type and made of thick acrylic sheet. (optional) stand is built in type or detachable. Blower unit has aue or equivalent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable uv tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been installed. Two way gas tap for gas line has also been provided.

• Material: Metal
• Feature: Durability, Rust Proof, Good Quality
• Size: 200x40x80 cm
• Pattern: Plain
• Loading Cpacity: 10-20kg
• Thickness: 0-10mm

We specialize in manufacturing and supplying Laminar Air Flow Cabinet. Laminar Air Flow Cabinet provided by us is recognized in the market for its unmatched quality, effective performance and long term durability. Keeping the market standards in consideration, we have fixed competitive prices for the same and make them available in safe packaging. Specifications : Work-bench made of thick ply-board enclosed with stainless steel sheet Blowers, pre-filters and motor fixed in lower portion of the cabinet HEPA Filter offered vertically on back of the work bench horizontally Also Available In : LAFH-01 Working area size 60 x 60 x 60 cm LAFH-02 Working area size 90 x 60 x 60 cm LAFH-03 Working area size 120 x 60 x 60 cm LAFH-04 Working area size 180 x 60 x 60 cm Entire structure manufacturing using Stainless Steel Structure made of M.S supplied with S.S. Work Bench

Laminar Air Flow Cabinets Vertical works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5 microns) and Hepa filters (down to 0.3 microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass. Pre filters:-DOP tested as per Standard BS: 2831 with efficiency 90% down to 5 microns. Made of Washable synthetic material.Hepa Filters:-Made of Microglass fibre with corrugated aluminium foil separators. DOP tested as per US Standard 209B. Efficiency 99.97% down to 0.3 microns.Blower Units:-Assembly of AU or equivalent motor workable on 220V AC 50Hz single phase, dynamically balanced blowers making the unit least vibrant with minimum noise level.Features:- Lighting : Fluorescent tube lights Sterilization : Germicidal Ultra Violet (UV) tube Manometer : Static pressure thick Acrylic block type Available in following sizes :-Working Chamber: 2 x 2 x 2′Working Chamber: 3 x 2 x 2′Working Chamber: 4 x 2 x 2′Working Chamber: 6 x 2 x 2′Working Chamber: 8 x 2 x 2′Optional K-System:-The K-System encompasses the specialist requirement of ocyte, sperm and embryo handling during procedures in both animal and human reproduction. The K-system is often built into a Laminar Flow Cabinet. The utensils are warmed by the heating of part of the table plate of the cabinet.The transmitted light source and the regulation transformer for the stereo microscope are located under the stainless steel table plate, with a window for transmitted light built into the table plate. Additional Information: Item Code: JCA-07 Pay Mode Terms: T/T (Bank Transfer) Delivery Time: 1 Weak

We are offering vertical laminar air flow cabinet. Advanced technocracy inc. Is manufacturer, exporter & supplier of vertical laminar air flow cabinet. Detail same as above adi-210 but with laminar flows down vertically from top to words the work table. Supplied complete with static finish mica table top. Transparent front door (5m.m), static pressure manometer, built in u.v. Germicidal light & flourescent light and cork for gas, air or vacuum line.

• Brand Name: JLab
• Model Number: JLab8788
• Place of Origin: India

Works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5microns) and Hepa filters (down to 0.3 microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass.

Laminar Flow Cabinets can be produced as both horizontal and vertical cabinets. There are many different types of cabinets with a variety of airflow design patterns for different purposes. The laminar air flow cabinets are also distinguished on the basis of materiel used for construction i.e Wood, MS (Mild Steel), SS (Stainless Steel).

We have bdi-129 Laminar Air Flow Cabinets (horizontal). laminar flow principal involves double filtration of air through coarse pre-filter (up to 5 microns) and hepa filter (down to 0.3 microns) for filtration of biological and particulate contaminants. A constant unidirectional air flow is drawn from atmosphere and passed through pre and hepa filter on the work surface. Fabricated out of reinforced ply board which is clad in from out side in laminated sheet and inner exposed areas are finished in epoxy paint table top covered with non glaring laminated sheet or stainless steel sheet slid panels are fixed and are made out of transparent acrylic sheet the front door is folding type and made of thick acrylic sheet stand is built in type or detachable. Blower unit has au or equivalent motor and is dynamically balanced with minimal sound & vibration level fluorescent lighting is also provided. A suitable uv tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the also been installed. Two way gas tap for gas line has also been provided. working chamber size in feet & mms: a) 2’ x 2’ x 2’ (600 x 600 x 600 mm) b) 3’ x 2’ x 2’ (900 x 600 x 600 mm) c) 4’ x 2’ x 2’ (1200 x 600 x 600 mm) d) 6’ x 2’ x 2’ (1800 x 600 x 600 mm)optional: stainless steel table top, folding front door made of acrylic sheet.

We are offering horizontal laminar flow cabinet.

We are offering laminar air flow cabinet with hepa filter, gas & vaccume cock, uv & florocent tube & ss top. size 2'x2'x2' & 4'x2'x2'.

Vertical Laminar Air Flow Cabinet Ask for Price Add To Cart VERTICAL LAMINAR AIR FLOW CABINET People who are looking for VERTICAL LAMINAR AIR FLOW CABINET)one of the Manufacturers, Suppliers& Exporters of laboratory equipments in which this is one of them for more information below mention is the details:- VERTICAL LAMINAR AIR FLOW CABINET(PSAW-157A) Details same as above BDI-170 with laminar flows down vertically form top to wards the work table. Supplied complete with static finish Mica table top. Transparent front door (5m.m). Static pressure manometer. Built in U.V. Germicidal light & fluorescent light and Cock for gas, air or vacuum line. Working Chamber Size A. 2�x2�x2� B. 3�x2�x2� C. 4�x2�x2� D. 6�x2�x2�

• Application: Laboratory
• Power Source: Electric
• Material: Mild Steel
• Brand: Almicro
• Surface Finish: Polished
• Voltage (V): 220 V
• Phase: Three Phase
• Frequency (Hz): 50 HZ

• Material: Mild Steel, Stainless Steel
• Application: In Laboratory
• Voltage: 110V, 220V
• Condition: Good, New
• Power Source: Electric
• Feature: Durable, Easy To Install, Fine Finish, Portable, Rust Proof, Strong Construction
• Warranty: 1year, 2years, 3years

• Type: Vertical
• Brand: SSGW
• Surface Finish: Powder Coated
• Usage/Application: Laboratory

Laminar Air Flow Cabinets, Laboratory Ovens, laboratory sterilizers

Vertical Laminar Air Flow Cabinet, FTIR Spectrometer

Horizontal Laminar Air Flow Cabinet, Bio Safety Cabinet