Material Testing Equipment Dealers in Ambala

• Material: Metal
• Size: 315*240*260 mm
• Warranty: 1 Year
• Thickness: 2-5 mm
• Max. Sample: 150-1200 gm
• Use in: Lab

The check on quality has been kept by our experts who ensure that the inputs we source are free from any sort of impurities. Thus, we ensure quality products at buyer's end. If you want to purchase quality with quantity, we are the name to be reckoned with! We are affianced in making available Sample Divider.Features : Durable Fine finish High strength

Portable Point Load Testing Machine : Portable instrument which can be used in both the laboratory or in situ to determine the rock strength index of rock samples or cores. The values required for the calculation of the rock strength index are failure load and distance between the conical points. Parameters: Max work pressure: 60Mpa Piston diameter: dia.35mm Piston area: 9.62cm2 Dimension: 380x300x620mm approx. weight: 85kg. approx.

Code: Aggregate0015 Riffle Sample Divider. Riffle Sample Divider Riffle Sample Divider from Civil Mechanical Laboratory India  Consists of a metal box fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. Riffle Sample Divider for Civil Engineering from Laboratory Equipment Manufacturers India - The chutes of the riffle are steep enough to allow rapid flowing of the material. Each riffle sample divider supplied with two pans and one scoop. Available Sizes Size: 13, 20, 25, 40 No. of Slot : 14, 16, 16, 16

• Material: Painted Mild Steel Or Stainless Steel
• Width of Chutes: 5 cms
• Hopper Size: 49.5 x24cms
• No. of Pans: 4
• Special Feature: Dividing or Halving Dry Material  

We are the main supplier of this product.

IRHD type Hover labs Tester made a vertical plunger. The lower side of the plunger has an indenter. The lower shape of the indenter is ball type of specified dimension. The upper sides of the plunger have a good eclectic conductive tip. The weight of the plunger and fitting attached to it is the minor force. A big brass weight is the major force of the specified weight. A dial gauge is attached to the instrument for the measurement of the penetration depth of the indenter to the rubber. An electricity operated buzzer, for gently vibrating the apparatus to overcome the slight friction is mounted under the cover of the instrument. The tester is finished in NC based painting and bright chrome plating to give it a corrosion resistance finish.

• Material: Brass
• Brand: Eletech-Eletech Lab Instruments
• Model No: ELI-1917
• Cover Plate Weight: 75gm
• Plate Size: 35x35mm
• Height of mould: 30mm
• Category: Civil Lab
• Tag: Le chatelier apparatus

• Material: Stainless Steel
• Application: Lab
• Application: Dividing Seed
• Color: Metallic
• Feature: Good Quality
• Finishing: Polished
• Size: Medium
• Size: 7 mm to 75 mm
• Material for Construction: Stainless steel
• Time Setting: 1-99min
• Cleaning Brush: 1
• Hopper, Scoop: Made of Stainless Steal
• Collecting Pans: 2 No’s

We are the manufacturers and exporters of a broad range of Strength Material Testing that are widely appreciated by our customers and are available in various specifications. Manufactured using high quality raw material, these equipments are known for their durability, accuracy, compact design, fine finishing, and precision engineered. The wide range of our products includes: Spring Testing Machine, Polishing Machine, Pendulum Impact Tester, Torsion Testing Machine, Fatigue Testing Machine, and Core Drilling Machine.

NAUGRALABS LABORATORY PRODUCT NAME: LE CHATELIER MOULD FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-038035 Description and Specification for Lab Tenders It is used for the determination of soundness by expansion method of ordinary and rapid hardening Portland cement, low heat Portland cement and class A lines.. Salient Features Specifications : It consists of a small split cylinder forming a mould. On either side of the split cylinder, two parallel indicating arms with pointed ends are attached. Supplied complete with two glass plates and a lead weight.  

BIS – 1607. Consists of a metal box mounted on legs and fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material.  

Used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm. up to a maximum of 10 mm. Our Riffle sample divider consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alliteratively in opposite directions into speculate panes. The chutes of the riffle are steep enough to allow rapid flowing of the material for the rapid preparation of sample, i.e. division into two representative portions. Each constructed of heavy gauge sheet metal, with particular attention given to reinforcement of the portions to maintain the accuracy of the slot dimensions. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers.

• Brand: VAISESHIKA

We are offering vaiseshika surface roughnesas tester. Description it is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive dsp processes and calculates and then outputs the measurement results on lcd. Features multi paramater measurement: ra, rz, rq, rt highly sophisticated inductance sensor four wave filtering methods: rc, pc-rc, guass and d-p built in lithium ion rechargeable battery and control circuit with high capacity small in size, light in weight and easy to use can communicate with pc computer for statistics, printing and analyzing by the optional cable and the software for rs232c interface manual or automatic (5 min delay) shut down. Specification display : 4 digit, 10 mm lcd, with blue backlight parameters : ra, rz measuring range : ra, rq : 0.005 - 10 micro m 1.00 - 400.00 ouinch : rz, rt : 0.020 - 100.0 micro m 0.078 - 4000 ouinch accuracy : not more than 10%; fluctuation of display value; : not more than 6% test principle : inductance type radius of probe pin : 5 micro m material of probe pin : diamond dynamo-measurement of probe : 15mn (1.6 gf) probe angle : 90 deg. Vertical radius of guiding head : 48 mm maximum driving stroke : 17.5 mm 0.7 inch cutoff lenght (i) : 0.25 mm 0.8 mm 2.5 mm optional evaluation lenght : 1 -- 5 cut off optional power li-ion battery : rechargeable dimension : 140 x 57 x 48 mm net weight : 420 g for our complete product range please visit our website www.vaiseshika.com

• Material: Painted Mild Steel Or Stainless Steel
• Width of Chutes: 5 cms
• Hopper Size: 49.5 x24cms
• No. of Pans: 4
• Special Feature: Dividing or Halving Dry Material

• Brand Name: TEI
• Condition: New
• Display Type: Digital
• Grade: Manual
• Supply: AC
• Minimum Order Quantity: 1 Unit

• Brand Name: OSAW
• Material: Brass
• Country of Origin: Made in India
• Color: Golden

• Soil testing lab equipments: Cone Penetrometer
• Soil testing lab equipments: Consolidation Apparatus

Product Description:The apparatus consists one each of Compaction Mould Gun Metal, 100mm I.D. x 127.3mm height x 1000 c. volume, complete with collar and base plate. Rammer 2.6kg x 310 mm controlled fall.

cementest material testing equipments, medical electro digital equipments

Seed Riffle Divider, Agate Mortar, Magnetic Stirrer Hot Plate