Passive Components Dealers in Ganesh Vihar, Ambala

For use as series resistors or potentiometers. Open slide wire type with a variety of resistance and current carrying capacity. Copper nickel alloys wire is oxidized to provide perfect insulation.

• Material: Mild Steel
• Application: Industrial
• Weight: 0-50gm, 100-150g
• Color: Silver
• Voltage: 220V
• Power Type: AC
• Frequency: 60Hz
• Automatic Grade: Automatic
• Driven Type: Electric

Classic Scientific Works is a prominent Manufacturer and Supplier of Sliding Rheostats. The Sliding Rheostats we supply are used as series resistors or potentiometers. These Sliding Rheostats offered by us are open slide wire type models with a variety of resistance and current carrying capacity. Copper nickel alloys wire is oxidized to provide perfect insulation to these Sliding Rheostats. Moreover, we make available the Sliding Rheostats in various sizes such as 6", 8" and 12".

Rheostats, Open type Single tube : Rheostats are made with a variety of resistance & current carrying capacity so as to satisfy every need. They are wound with heavely oxodised eurika resistance wire upon a porcelene tube dia 44 mm aprox. The tube is carrying upon bakalite ridder and the heavy duty sliding contact is of the phospor bronze with brass rod. 4 mm socket terminals are fitted, allowing for rheostat or potentiometer connection. Total resistance and maximum current capacity is marked on the slidder. Total Permanent current loading should not exceed 75% of the marked values.Accuracy : The actual resistance of Rheostat shall be +20% -5% of the rated resistance as per our resistance chart. (as per ISI specification no. IS : 9051 S. No. 10.3)

We are main supplier of this product.

Power Rheostats are made with a variety of resistance & current carrying capacity so as to satisfy every need. They are wound with heavily oxidized eureka resistance wire upon a porcelain tube dia 44 mm aprox. The tube is carrying upon Bakelite rider and the heavy duty sliding contact is of the phosphor bronze with brass rod. 4 mm socket terminals are fitted, allowing for rheostat or potentiometer connection. Total resistance and maximum current capacity is marked on the slider. Total Permanent current loading should not exceed 75% of the marked values. The actual resistance of Wire Wound Rheostats shall be +20% -5% of the rated resistance as per our resistance chart. (as per ISI specification no. IS : 9051 S. No. 10.3), we are recognized as one of the major Electronic Rheostats Manufacturers and Exporters from India.

We are offering rheostats wounded with eureka wire on porceleen pipe . available in 6 inch, 8 inch , 10 inch and 12 inch. metal feet or plastic feet as per customer choice. the rheostats are also manufactured according to the ohms and ampere given by the customers.

• Type: Electric Potentiometer, Potentiometer
• Material: Aluminium, Plastic, Polyester Film, Raw Aluminium
• Application: Automotive Use, Industrial Use
• Color: Blue, Grey, Light White, Metallic, Silver, White
• Voltage: 0-100VDC, 100-200VDC, 200-400VDC, 400-800VDC
• Condition: New, Old
• Frequency: 50Hz, 60Hz
• Driven Type: Battery, Electric
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance
• Temperature: -25 +85deg C, -40 +70deg C, -45 +55deg C, -70 +40deg C
• Linear Precision: 0.5%FS, 1%FS

• Feature: Low power consumption

we are instrumental in manufacturing and supplying premium quality 3 Phase Loading Rheostat. This rheostat is manufactured under the stern guidance of qualified professionals in tandem with set quality standards using sophisticated machinery and latest technology. Offered rheostat is used to control the load by the aid of switch control devices. Provided rheostat is tested on various parameters to ensure its performance. Additionally, we provide this 3 Phase Loading Rheostat to clients at nominal prices.

• Country of Origin: India
• Type: Physics Labware
• Material: Brass
• Application: To Determine The Internal Resistance Of A Given Primary Cell Using A Potentiometer.
• Feature: High Performance
• Material of Construction: Brass, Wood

A Simple instruments to teach students the techniques and  methods of e.m.f measurement, fitted on nicely polished plywood base with sunmica top, soft wood graduated scale 100cm x 1mm, resistance wire is stretched along the ends of meter scale, brass CP connecting strips and brass terminals, provided with pencil jockey. 4 Wire 10 Wire

• Usage: Pathology Lab
• Model: GWL814
• Base Material: PVC/Wooden
• Packaging Type: Carton Box
• Specialities: Durable, Easy To Use

Half Meter Bridge: Four-Gap bridges – 0.5 and 1 m Two and four wire potentiometers – 2m Dual figured scale      Four gap type, mounted on rigid PVC/Wooden base. With Constantan wire 0.56 mm dia. and plated copper strips and connecting pieces. Fitted with 4 mm socket terminals and scale graduated 0 to 50 cm x 1 mm and 50 to 0 cm x 1 mm. Complete with Pencil Jockey 

We are offering dc potentiometer. The precision dc potentiometer type - 9408 has been designed to provide the highest standards of accuracy over a period of many years without any maintenance, whilst at the same time allowing rapid and easy operation. The most outstanding contribution to the development of potential meters in recent years resulted from the introduction of the unique vaiseshika low resistance precision instrument switch, used through out the precision dc potentiometer. Vaiseshika.com is available for more details. this switch was developed after several years of research into the fundamental factors affecting contact resistance. The stationary contacts are silver clad copper bars, mounted in a robust insulating frame. The brush, which is composed of several contact springs, each of which is independent of the others and is unrestricted in its movement, makes a bridge contact between adjacent bars in a symmetrical manner. As a result, low and consistent contact resistance is achieved without high contact pressure or mechanical wear. After a life test of some 20,000 operations, the switch was still mechanically sound and its stability had actually improved in the narrow range specified. The over all switch resistance is approximately 0.001 ohm and the variation of contact resistance is less than ± 0.0001 ohm.

"Vaiseshika" DC STANDARD RESISTOR 9409 has been designed and fabricated to meet the standard calibration requirements. These Standard Resistors can be used for calibration. To ensure stringent accuracy, high degree of stability and utmost reliability, the Manganin wire and strips have been used to construct Standard resistors. These Standards incorporates the  manganin coils which have been subjected to prolonged ageing and heat treatment, to improve stability and to reduce temperature coefficient. Joints are silver soldered with copper being used for connection to terminals. Resistance elements are sealed in aluminium container having moisture free oil. Use of oil improves cooling effect which in turn imparts greater stability to resistance.

Variable up to 345 ohms at 1.2 A rating for use as a series resistor or a Potentiometer. Enclosed type in metal case with windings on porcelain firmer 350 X 56 mm (l x d) three 4mm socket terminals and four mounting lugs tapped OBA.

• Brand Name: EROSE
• Place of Origin: india
• Specifications: Laboratory Instruments

Glass Agencies EROSE are manufacturer of Rheostat . Glass Agencies EROSE are manufacturer and exporter of all type of Medical, Laboratory, Ophthalmic and Optometric Instruments.

CROMPTON POTENTIOMETER, Pipette Stand, Conical Flasks, Crucible

We are instrumental in manufacturing and supplying precision-engineered Rheostat Single Tube Protected. Customers can avail from us Rheostat Single Tube Protected that is used as a series resistor or a potentiometer with variable up to 345 ohms at 1.2 rating. Our enclosed type Rheostat Single Tube Protected comes in a metal case with windings on porcelain former 350mm long x 56mm diameter; three 4mm socket terminals & four mounting lugs tapped.

potentiometers digital potentiometer

• Country of Origin: India
• Type: Rheostat
• Condition: New

Comprising a layer of resistance wire wound on an insulating, heat resistant tube (porcelain) which is supported by cast metal feet, our rheostats are highly appreciated by our customers. A sliding contact & three 4mm socket terminals are provided, one terminal being connected to the sliding contact & the other two to the ends of the winding, enabling the unit to be used as a Rheostat or potentiometer. We are counted as the principal sliding rheostat manufacturer and among the eminent laboratory rheostats exporters and suppliers from India.

The company has cemented its presence among the renowned Manufacturers, Suppliers and Exporters of Rheostats from Haryana. We make available different types of Rheostats such as sliding rheostat, lead screw motion with handle and single and double tube. In order to cater the diverse requirements of the buyers, we also provide customization of the Rheostats. Bulk orders of the Rheostats are processed by us as per the specific requirements of the buyers. Details : Rheostat is used in applications that require the adjustment of current or the varying of resistance in an electric circuit The rheostat can adjust generator characteristics, dim lights, and start or control the speed of motors Rheostats are spaced wound with best quality Eureka or Nichrome Alloy Resistance Wire having very low temp Co-efficient and wire is protected with high temp The winding is done on Porcelain or vitreous enameled drawn steel tubes, fitted with Plastic or aluminum die casted stands/fabricated steel stands Phosphor Bronze Contacts are fitted on brass slider, Slides on solid drawn brass rods

We are offering earth inductor al. Metal ring : (6” dia) on which a coil is wound (of either 500 or 1000 or 2000 turns ) of 36 swg. A stop limiting rotation : to 180° of ring is provided with the help of a spring. The cradle supporting : the coil non-magnetic alloy 200 x 210 x 115 mm high may be placed either on its base or side so that the axis of rotation of the coil is either horizontal or vertical. Provided with the terminals.

• Material: Stainless Steel
• Voltage: 220 V
• Country of Origin: Made in India
• Current: 10 AMp
• Packaging Type: Box
• Rated Power: 9 W
• Frequency: 50 Hz
• Type: Single Tube Rheostat
• Phase: Single Phase

If you need long-lasting Rheostat Single Tube Protected from Ambala, Haryana, India, place your request for a bulk order with us. Being one of the acknowledged manufacturers and exporters, we offer superior quality tubes at market leading prices. Our team of dedicated workers carefully processes the product using high-grade materials. The offered product is loved in the market as these promise superior finishing, impeccable texture, and longer functional life. We source this product from trusted vendors in the market.   Detail : Variable up to 345 ohms at 1.2 A rating for use as a series resistor or a potentiometer. Enclosed type, in metal case with windings on porcelain former 350 mm long x 56 mm dia, three 4 mm socket terminals and four mounting lugs tapped.   Model Number : GP-673