PVG International Ram Nagar, Ambala, Haryana

Galvanized steel body fitted on painted tubular iron frame with rubber tyred nylon wheel. Handle with plastic grips.

Exclusive designs, Long service life, Quality assured. Watering Can 325 Grms. Premium quality material is used by us to manufacture our range, which are sourced from the authorized vendors of the industry. Clients appreciate us for offering products as per their choice and demands. Moreover, we make available these products to the clients at very genuine prices.

Direct Reading Display for all commodities, RS-232 port available for interfacing printer or personal Computer Separate code for each commodity No Arithmetic Required Room Temperature Display Automatic calibration Technical Specifications Range 3.5% – 40% Accuracy Resistance Measurement Principle +0.2% Display L.C.D Display Mass 2.5 KG approx. without accessories Size 45 x 25 x 33 cm approx. Power Six 9V Dry Cells or 230 volts, 50 Hz AC through adaptor Temperature Automatic

  Pressed steel blade with PVC handle. Size (blade) ………..short, medium and long.

Two types i.e Ceiling Suspended or steel stand supported with suspension chains to be suspended/hanged with the ceiling. Can also be fixed with support stands. Fabricated out of stainless steel framework of stainless steel tubular or mild steel with thick Salient Features Efficiency :99.97% (or above) down to 0.3 micron. Blower Unit :Centri-balanced , Centrifugal motorized blower with 1/3 h.p. 1440 rpm Discharge :Air volume 90 cfm =10% Noise level :Below 65 db Illumination :By fluorescent tube as per size of working area Germicidal :By ultra-violet tube (on Request)(Approx 50 micro watts per sq. cm on the entire work surface) Electrical : Controls are on the front facia of the chamber. Internal wirings are protected with heat resident material. Mains are through M.C.B. for higher protection against shock/damage. Manometer :Block type acrylic/Plexi-glass inclined Static Pressure Manometer or Dial type Magnehelic Differential Pressure Manometer (Optional) Support Stand: Stainless steel square pipe stand with levelling device (Optional) Filter : Standard HEPE filter Manipulated HEPA filter & hour meter for U.V. Tube & Blower (Optional) Supplied complete with : H.E.P.A. Filter, pre filter, Centri- balanced, Centrifugal Air Succession blower Unit, Flourescent Tube Light, UV tube, Static Pressure Manometer Standard Dimensions of working area: (I) 600 x 600 mm. (ii) 1200 x 600 mm. (iii) 1200 x 1200 mm. (iv) 1200 x 1200 mm. (v) 1800 x 1200 mm. Other sizes can be designed as per customer specification. Note : Optional Accessories and Test Facilities at extra cost.

Head frame, rubber tubing and chest piece for noting the sounds from chest and heart. (a) For adults (b) For Children (For details see our surgical section catalogue)

Simple, sturdy, suitable for use in soft and medium soil conditions. Loosens and aerates the soil to a depth of up to nine inches. prepares seed beds quickly and economically. When one tine strikes a buried object, the others continue to work at the correct depth. The dual spring loaded tine assemblies derive their strength from heavy duty angles, which once fixed to the main frame cannot move out of position. Comes with high quality reversible steel shovels.

High density polypropylene, hand operated, pressure generated by hand pumping which produces an immediate spray through nozzle fitted in the screw cap, connected to the base by PVC tubing.

Pressed flat blade with 700 mm long wooden shaft with D shape handle. Blade size 250 x 150 mm.

Deep sieve with all mesh size , brass or galvanized steel body. Size 200 or 300 x 100 mm diameter x depth.

makes long time, continuous working tireless and convenient. With superior adjustments components for long life and smooth working. Provides jerk-free, uniform sections down to 1 micron. Fully protected internal mechanism as encased in a hinged cover saving it from grit and moisture. Heavy base with solid rubber feet makes it stable while working. Precise and accurate feed range mechanism, razor holder and object carrier etc. Feed mechanism fabricated to advance the object block in such a precision increments that tissue can be sectioned down to 1 micron thickness. Feed release automatically disengages on reaching the maximum limit. Indicator, graduated in microns is located on front of the instrument. Provided with a safety locking device in the advance wheel when razor or specimen block needs to be changed or when the machine is not in use.  Block and razor holder can be adjusted at any desired angle or place. Double wedged razor of fine grain tool steel, heat treated and tested for microstructures for long time sharpness. Razor with a hollow back and solid removable handle for safe handling and adjustments. Return wheel is with a handle which permits rapid movement of block holder and the attached mechanism, forward and backward within the working distance of microtome. Razor holder with fine lateral movements to permit use of complete knife edge to 120mm and also with adjustments to set at required angle. In wooden box with operational & maintenance manual.

Made out of either brass or G. I. And wire mesh or perforated Mild Steel sheet, designed to confirm to specification set by .I.S. Standard sieves has 8” or 12” dia, 2” approx depth. Frames are skirted to nest together. Suitable for grain/seed grading.

Used for cleaning and grading of free flowing granular material and grains such as wheat, rice, barley, maize. Features: • Easy to operate • Precisely engineered • Hassle-free functioning Useful in removing impurity after the seeds are threshed. This process is used to get rid of most of the chaffs, straws and dust before further processing for fine cleaning. The cleaning capacity is increased by the highly effective feed and aspiration system of the machine, separating some nine-tenths all-light particles before the product is delivered to the screens. Application: For cleaning and grading of free flowing granular material, grains like wheat, rice, barley, maize etc. and seeds of all kinds’ i.e. fodder seeds, oil seeds, cereals and forest seeds etc., based on their size. It separates the immature and light impurities based on the air aspiration and screen perforation selected.

Most suitable for contducting various experiments on a variety of seeds under different conditions of temperature and humidity. Atmospheric conditions are created within the chamber to perform different experiments without going onto the field. The double walled unit has inner chamber made up of anodized aluminium or of Stainless Steel and outer chamber of Mild Steel Sheet duly painted. Temperature from 5 Degree Centigrade to 50 Deg. C +- 1 Deg. Cent. is controlled by Digital temperature indicator-cum-controller. Humidity (Not Adjustable) is created in a stainless steel water reservoir fitted at the bottom 90% to 95% +- 3% RH Humidity. Complete with 8 or 14 adjustable perforated trays. Supplied complete with cord and plug to work on 220/230 V 50 Hz A.C. supply. Inside Chamber size

The double walled unit has inner chamber made up of Stainless Steel and outer chamber of Mild Steel Sheet duly painted. Temperature from 5 ° Centigrade to 50°. C +- 1° C. is controlled by Digital temperature indicator-cum-controller. Humidity (Not Adjustable) is created in a stainless steel water reservoir fitted at the bottom 90% to 95% +- 3% RH Humidity. Complete with 8 or 14 adjustable perforated trays. Supplied complete with cord and plug to work on 220/230 V 50 Hz A.C. Supply. Inside Chamber size 1. 505 x 500 x 415 mm.       Capacity 6 cu.ft. No of trays 8 2. 555 x 910 x 625 mm.       Capacity 12 cu.ft. No of trays 14 Optional Digital Temperature Controller Cum-indicator 0-24 hrs Timer for regulating cyclic illumination condition.

Good quality , Sturdiness, Smooth finish Analog measuring device for measurement of Length and Breath of Seeds.

Display: Seven Segment FND Seed Size: 0.5 mm to 15 mm. No of Seeds in a Batch: Up to 9999 Seeds Features • Batching, repeat and multiple • Batches creating facility. • Batch Count • Accurately counts a predetermined number of seeds in a single Batch. Repeat Batch: Allows for the continual duplication of a single batch count. Multiple Batch Batch counts can be set to count number of batches with different seed counts

Used to check the quality of food grains, in coming materials in mandies and seed plants. Can also be used seed grader(lab modal) to assess the fraction of various impurities and immature grains. Features: • Easy to use • Accurate results • Perfect finish Includes enameled plate, weighing balance up to 100gm, weight box up to 100gm, parkhi 9″, sieve 3. 30 mesh, magnifying glass’, scoop, vernier caliper, palm husker, broken separator, forceps, petridish, measuring cylinders 10cc, 20cc, 50cc, 100cc. All packed in a compact wooden case.

Steel, slotted at end to accept blades. Available in 3, 4, 5 and 7 number. Handle no. 3 and 5 can be used for blades number 10 – 15  and handle no. 4 for blade 20 to 25 .

Excellent performance • Rugged construction • Long lasting Specifications: Sample Capacity: 1000 gms Power: 0.25 H.P. Single Phase Dimensions: 715 x 335 x 795 mm (L x B x H)

For the observation of habits of earthworms. Consist of a free standing vertical, wooden frame having two slots for glass plates with 25 mm separation. Dimensions 385 x 250 mm Ht. x Width

We provide exclusive Rotary Microtome which is known for high performance and durability and is for precise sections of cutting tissue blocks embedded in paraffin by smooth and easy rotary movement with a wheel. Construction and functioning : Razor of fine grain tool steel, heat treated and tested for microstructures. Razor is of double wedge pattern to maintain optimum long time sharpness. Accurate and precise razor holder with lateral movement to permit use of complete knife edge of 120 mm. Angle of razor can be set at any required degree. There is a Razor with a hollow back and a solid removable handle for safe handling. The object holder provides movements in various directions for setting the block holder in the required alignment of the razor. The feed range is enough to cut sections up to 25 microns in steps of 1 micron each. For convenient setting of the thickness of sections to be cut, a precise and graduated knob in microns has been provided in front of the machine. The return wheel permits rapid movement of the block holder and the attached mechanism, forward and backward within the working distance of the microtome. Approx. mass: 20 Kg. Packaging : Wooden box with operational and maintenance manual Features : Facilitates long time continuous working with minimum fatigue and effortProvides jerk-free and uniform thin sections down to 1 micron. Long life, with minimum wear and tear but routine maintenanceRobust construction with internal mechanism fully protected as encased in a sturdy metallic hinged cover, thus safe from moisture and dustHeavy base with solid rubber feet provides stability to machine during working Standard accessories provided : Razor 120 mm with back and handle - oneObject holders set of three - one setHoning plate - oneOil can - oneDust cover - oneLeather strop - one Optional : Independent safety razor blade holder (Extra cost)

We provide exclusive Rotary Microtome which is known for high performance and durability and is for precise sections of cutting tissue blocks embedded in paraffin by smooth and easy rotary movement with a wheel. Construction and functioning : Razor of fine grain tool steel, heat treated and tested for microstructures. Razor is of double wedge pattern to maintain optimum long time sharpness. Accurate and precise razor holder with lateral movement to permit use of complete knife edge of 120 mm. Angle of razor can be set at any required degree. There is a Razor with a hollow back and a solid removable handle for safe handling. The object holder provides movements in various directions for setting the block holder in the required alignment of the razor. The feed range is enough to cut sections up to 25 microns in steps of 1 micron each. For convenient setting of the thickness of sections to be cut, a precise and graduated knob in microns has been provided in front of the machine. The return wheel permits rapid movement of the block holder and the attached mechanism, forward and backward within the working distance of the microtome. Approx. mass: 20 Kg. Packaging : Wooden box with operational and maintenance manual Features : Facilitates long time continuous working with minimum fatigue and effortProvides jerk-free and uniform thin sections down to 1 micron. Long life, with minimum wear and tear but routine maintenanceRobust construction with internal mechanism fully protected as encased in a sturdy metallic hinged cover, thus safe from moisture and dustHeavy base with solid rubber feet provides stability to machine during working Standard accessories provided : Razor 120 mm with back and handle - oneObject holders set of three - one setHoning plate - oneOil can - oneDust cover - oneLeather strop - one Optional : Independent safety razor blade holder (Extra cost)

Used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm. up to a maximum of 10 mm. Our Riffle sample divider consists of a sheet metal box mounted on legs and fitted with a series of chutes or equal width which discharge the material alliteratively in opposite directions into speculate panes. The chutes of the riffle are steep enough to allow rapid flowing of the material for the rapid preparation of sample, i.e. division into two representative portions. Each constructed of heavy gauge sheet metal, with particular attention given to reinforcement of the portions to maintain the accuracy of the slot dimensions. This equipment is mainly used for sampling aggregates, cement, ores, refractory materials, pigments, soap, powdered coal etc. It is also used for rapid collection of true representative sample from aggregates, sand and fillers.