Resistance Thermometer Dealers in Ambala Cantt, Ambala

We are offering platinum resistance thermometer the resistors are of manganin coils bridge wire is accurately calibrated. Vernier is attached to the sliding contact and fine slow motion available mercury contacts are fitted. Length of the slide wire is 30 cm. Resistance values are 0.1, 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, 12.8 and 0.15 ohm for 30 cm slide wire. Range of resistance measurable.

• Type: Resistance Thermometer
• Length: 10-15cm, 15-20cm
• Feature: Anti Bacterial, Durable, Light Weight
• Width: 40-50mm
• Temperature Range: 10-50C
• Thermometer Type: Digital
• Country of Origin: India

• Material: Glass
• Application: Lab Use
• Feature: Durable, Light Weight
• Length: 33cm
• Model: GWL812
• Diameter: 14mm

Enclosed in a borosilicate glass tube 33 cms long, 14 mm dia. Four terminals (2 mains, 2 compensatory) resistance approx. 2.8 ohms. Fundamental interval 1 ohm. Range 0 – 500º C 

• temperatures: upto 150°C.

Platinum Resistance Thermometer Platinum wire of about 2 ohms resistance, noninductively wound on a mica frame with copper leads, together with a pair of compensatory leads, all being connected to 4 mm socket terminals, for temperatures upto 150°C.

For showing the principles of platinum resistance thermonetry and for accurate temperature measurement using a bridge method such as 'Cary-Foster' bridge. The thermometer comprises a length of fine platinum wire of about 2 ohm resistance, wound non-inductively on a mica frame and soldered to stout copper leads. A pair of compensating leads are provided, all four leads being connected to 4mm socket terminals. Since the connection are soft soldered, this resistance thermometer is suitable for temperatures up to about 150oC only and for low termperature work.

We arer offering platinum resistance thermometer (ee - 527) enclosed in pyrex glass tube or aluminium tube of approsimately 30 cms long & 2 cms diameter. A fine platinum wire is wound on the mica. Its resistance is approximately 2.8 ohms. Two compensatory leads are connected to four terminals on a square block. The terminals are marked cl and pl to represent compensating and platinum leads.

It consists of a thin platinum wire (2W) wound non inductively on an insulating frame enclosed in a glass tube along with a pair of compensating leads. The tube has a plastic cap fitted with two pairs of terminals connected to the platinum wire and compensating leads respectively.

For showing the principles of platinum resistance thermonetry and for accurate temperature measurement using a bridge method such as Cary-Foster bridge. The thermometer comprises a length of fine platinum wire of about 2 ohm resistance, wound non-inductively on a mica frame and soldered to stout copper leads. A pair of compensating leads are provided, all four leads being connected to 4mm socket terminals. Since the connection are soft soldered, this resistance thermometer is suitable for temperatures up to about 150oC only and for low termperature work.

Platinum Resistance Thermometer, Rheostats, Ripple Tank, Student Polarimeter