Ripple Tank Dealers in Ambala

The ripple tank is a device to illustrate the laws which govern all wave phenomenon using ripples on the surface of water as the prototypes of all transverse waves. It illustrates important wave motions like rectilinear and circular. It can also demonstrate refraction, diffraction, and interference of water waves. Tank is supported by four legs having levelling screws. Size of tank is 595 x 510 x 70 mm supplies complete with rippled assembly, two straight obstacles 130 mm long, one straight obstacle 40 mm long, curved reflector 200 mm radius, transparent refraction plate, wooden wave roller, one pack of rubber bands, water dropper, sponge, illuminator, hand stroboscope and suitable power supply. It is supplied with instruction manual.

We are offering ripple tank. The ripple tank is a device, used to illustrate the laws of wave phenomenon, using ripples on the surface of water as the prototypes of all transverse waves. The ripple tank effectively illustrates important wave motions like rectilinear and circular and can demonstrate refraction, diffraction and interference of water waves. In addition, the ripple tank is equipped with a transparent refraction plate, wooden wave roller, one pack of rubber bands, water dropper, sponge, illuminator, hand stroboscope, and suitable power supply. The ripple tank is supplied with instruction manual. specifications size of the tank: 595x510x70mmtwo straight obstacles 130mm longone straight obstacle 40mm longcurved reflector 200mm radius

The ripple tank is a device to illustrate the laws which govern all wave phenomenon using ripples on the surface of water as the prototypes of all transverse waves. Ripple tank illustrates important wave motions like rectilinear and circular. It can also demonstrates refraction, diffraction and interference of water waves. Tank if supported by four legs having leveling screws. Size of the tank is 595 x 510 x 70 mm supplied complete with rippler assembly, two straight obstacles 130mm long, one straight obstacle 40mm long, curved reflector 200mm radius, transparent refraction plate, dropper, sponge, illuminator, hand stroboscope and suitable power supply. It is supplied with instruction manual.

The apparatus consists of a framed tray with a plexi glass base and detachable legs. A pair of support rods with clamps is provided which can be attached to the sides of the tank and used to carry the wave generating system. A set of 4 metal barriers (reflectors) is included consisting of a pair of straight barriers 150x25mm, a curved barrier of 215mm chord length x 25mm high and a short, straight barrier of 25x25mm. The ripples are produced by a small 1.5 to 4.5V D.C. electric motor mounted at the centre of a wooden wave generator bar with a row of holes to mount the spherical dippers supplied. It is recommended that the power supply unit is used as this has been specially designed for use with the ripple tank. It has continuously variable D.C.. output so that the speed of the motor and hence the frequency of the ripples may be varied. One white card sheet may be placed on the floor underneath the tank as a screen to receive the wave pattern shadows. Tank can be used with an overhead projector. The full set of apparatus comprises: A. Ripple tank 300x300x35mm deep B. Gantry complete with beam 4.5V DC motor fittings C. Screw in legs for bench mounting D. Illuminant E. Spherical dippers F. Glass plate and spacers for refraction G. Dropper H. Suspension bands I. Leveling wedges Supplied without power supply and stroboscope

We offer ripple tank. The instrument is a device to illustrate the laws of wave phenomenon-using ripples on the surface of water as the prototypes of all transverse waves. Ripple tank illustrates important wave motions like rectilinear and circular. It can also demonstrate refraction, diffraction and interference of water waves. Tank is supported by four legs having leveling screws. Size of the tank is 595x510x70mm supplied complete with ripple assembly, two straight obstacles 140mm long, one straight obstacle 40mm long, curved reflector 200mm radius, transparent refraction plate, wooden wave roller, one pack of rubber bands, water dropper, sponge, illuminator, hand stroboscope and suitable power supply.

We are engaged in Manufacturing, Exporting and Supplying of Ripple Tank. The versatile apparatus may be used as demonstration model with an overhead projector or as an economical method of allowing pupils to carry out their own investigations. Four legs are provided enabling the tank to also be used as a free standing bench model. Facilities are provided for mounting a ripple tank illuminant. A gantry is supplied for supporting a motor beam, the height of which is adjustable allowing it to be positioned for maximum effect. Ripples are produced by small 1.5V to 4.5V D.C. motor mounted on the wooden beam of 240 mm length. A cam is fitted to the motor spindle to give an oscillatory motion and a row of nine holes in the beam are for mounting the spherical dippers for production of circular ripples. Features Robust ConstructionDurableReliableNominal Rates

• Type: Ripple Tank
• Material: Stainless Steel
• Shape: Rectangle, Square
• Application: Laboratory, Physics Lab
• Color: Blue, Brown, Green, Grey, Silver
• Frequency: 50 Hz, 60 Hz
• Packaging Type: Box, Corrugated Box
• Power Source: Electric
• Frame Material: Box, Carton
• Phase: Single Phase
• Connection Voltage: 220V, 240V

• Size: 580 x 500 x 70 mm

RIPPLE TANK To illustrate the laws, which govern all wave phenomenon-using ripples on the surface of water as the prototypes of all transverse waves. Ripple tank illustrates important wave motions like rectilinear and circular. It can also demonstrate refraction, diffraction and interference of water waves. Tank is supported by four legs having levelling screws. Size of the tank is 580 x 500 x 70 mm supplied complete with rippler assembly, two straight obstacles 130 mm long, one straight obstacle 40 mm long, curved reflector 200 mm radius, transparent refraction plate, wooden wave roller, one pack of rubber bands, water dropper, sponge, illuminator and power supply.

The Ripple Tank Apparatus is a device to illustrate the laws of wave phenomenon-using ripples on the surface of water as the prototypes of all transverse waves. Ripple Tank Apparatus illustrates important wave motions like rectilinear and circular. Ripple Tank Apparatus can also demonstrate refraction, diffraction and interference of water waves. Ripple Tank Apparatus is supported by four legs having leveling screws. Size of the tank is 595x510x70mm supplied complete with rippler assembly, two straight obstacles 130mm long, one straight obstacle 40mm long, curved reflector 200mm radius, transparent refraction plate, wooden wave roller, one pack of rubber bands, water dropper, sponge, illuminator, hand stroboscope and suitable power supply. Ripple Tank Apparatus is supplied with instruction manual.

Dual Purpose Ripple Tank P-7365 The versatile apparatus may be used as a demonstration model with an overhead projector or as an economical method of allowing pupils to carry out their own investigations. Four legs are provided enabling the tank to also be used as a freestanding bench model. Facilities are provided for mounting a ripple tank illuminant. A gantry is supplied for supporting a motor beam the height of which is adjustable allowing it to be positioned for maximum effect. Ripples are produced by a small 4.5V DC motor mounted on the wooden beam of 240mm length. A cam is fitted to the motor spindle to give an oscillator motion to spherical dippers for production of circular waves. The full set of apparatus comprises : A. Ripple tank 300x300x35mm deep B. Gantry complete with beam 4.5V DC motor fittings C. Screw in legs for bench mounting. D. Illuminant support rod. E. Spherical dippers F. Glass plate and spacers for refraction G. Dropper H. Suspension bands I. Leveling wedges

The versatile apparatus may be used as demonstration model with an overhead projector or as an economical method of allowing pupils to carry out their own investigations. Four legs are provided enabling the tank to also be used as a free standing bench model. Facilities are provided for mounting a ripple tank illuminant. A gantry is supplied for supporting a motor beam, the height of which is adjustable allowing it to be positioned for maximum effect. Ripples are produced by small 1.5V to 4.5V D.C. motor mounted on the wooden beam of 240 mm length. A cam is fitted to the motor spindle to give an oscillatory motion and a row of nine holes in the beam are for mounting the spherical dippers for production of circular ripples.

• Available in size: 595 x 510 x 70 mm
• Features: Consists of an enameled M.S sheet frame with four adjustable legs.,Complete with all the accessories and working instruction.,Quality tested,Highly demanded,Durability
• specification: A Ripple tank is a shallow glass tank of water used in schools and colleges to demonstrate the basic properties of waves.It is a specialized form of a wave length.The ripple tank is usually illuminated from above, so that the light shines through the wate

• Shape: Rectangular
• Material: Aluminium Alloy
• Automation Type: Semi-Automatic
• Brand: Ambros
• Usage/Application: Lab Equipment

The versatile apparatus may be used as demonstration model with an overhead projector or as an economical method of allowing pupils to carry out their own investigations. Four legs are provided enabling the tank to also be used as a free standing bench model. Facilities are provided for mounting a ripple tank illuminant. A gantry is supplied for supporting a motor beam, the height of which is adjustable allowing it to be positioned for maximum effect. Ripples are produced by small 1.5V to 4.5V D.C. motor mounted on the wooden beam of 240 mm length. A cam is fitted to the motor spindle to give an oscillatory motion and a row of nine holes in the beam are for mounting the spherical dippers for production of circular ripples.

• Size: 52 x 44 x 40 cm

The Ripple Tank is a very effective tool that helps students to understand wave echanics. The Ripple Tank is also used to introduce, develop and visually demonstrate wave theory such as refraction, diffraction and Interference. Our unique system uses a pulsed air supply so that standing waves are easy to reproduce. The Ripple Tank is supplied with all accessories, including connecting cables and instruction manual. We use a unique pulsed air system to produce accurate and epeatable waves with our Ripple Tank. The electronic controller allows you to control the frequency of the pulses and hence the value of the wavelength. The controller also coordinates the same pulsed air frequency to the stroboscope so that the waves appear to be static and therefore easily measurable.

Ripple Tank, PNP NPN Transistor, Bi Cycle Dynamo, Crocodile Clips

Ripple Tank, Stainless Steel Distillation Apparatus, Histamine Chamber

Sound & Waves 1, Microscope Cover Glass, clinostat, Film Slide Projector

Ripple Tank, Asynchronous Motor With Wound Rotor, Ticker Tape Timer

Ripple Tank, Van De Graaff Generator, biological microscopes