Scientific Instruments Dealers in Punjabi Mohalla, Ambala

We 'national scientific apparatus works' offering our customers tangent galvanometer . It consists of a bakelite moulded ring 170 mm, with three sets of winding - either 2, 50 and 500 turns (depending upon the requirement) respectively, carfully insulated, connected to heavy brass terminals. The number of turns is clearly marked between the terminals. The ring is mounted on a pivoted round bakelite base which rotates on an aluminum tripod base fitted with three brass leveling screws. The high sensitive compass box (with permanent magnet) is mounted on a substance brass pillar and is free to rotate upon it. The compass is 5" in dia and has a scale graduated to single degrees. Overall height is approx. 9". All brass parts are chrome plated. Supplied with permanent compass box. Beware of duplicate,low quality products. Buy only from national scientific apparatus works store

Digital flame photometer with filters Na & K 2 ½ digit LED display along with compressor and other accessories. Medi flame photometer with Na & K filters. Results in meq/1 for medical use. 2 ½ digit LED display with compressor and other accessories. Accessories Additional filter such as Na, K, Li, Ca each for flame photometer.

• Brand Name: SLISCO
• Country of Origin: India
• Bitumen and asphalt - oil testing equipment: Saybolt Viscometer Apparatus
• Bitumen and asphalt - oil testing equipment: Flow Cup Viscometer

These viscometers are designed for viscosity tests of petroleum products. They confirm to requirements of ip 70. Two adaption of red wood viscometer are available no. 1 for liquids having red wood flow 20 seconds to 2000 seconds and no. Ii for liquids whose flow time exceeds 2000 seconds. The complete outfit comprises stainless steel bath with electrical heating arrangement suitable to operate at 220 volts ac mains with tap, silver plated oil cup with precision stainless steel jet, cup cover, ball valve, thermometer-clip. Stirrer and m.s. Sheet stand with levelling screws. Salient features electrically heated with energy regulator control. gas heated with gas burner electrically heated model with voltage varier (copper coil) with electronic digital indicator and controller & fhp motor stirrer

• Type: Electronics Laboratory Instruments
• Application: Laboratory Use
• Weight: 0-10kg, 10-20kg, 20-30kg, 30-40kg, 40-50kg
• Type: Beaker, Funnel, Machine
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V, 580V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electronics Laboratory Instruments
• Warranty: 1yrs, 2yrs

Flame photometers digital flame photometer digital clinical flame photometer.

Owing to the hard work and goodwill, our name features in the list of the vital manufacturers and exporters of Table Spectrometer from Ambala, Haryana, India. Our high-tech manufacturing unit and team of workers carefully manufacture the product using advanced machinery and modern equipment. Our range of products is comfortable to use and promises durability and low maintenance cost.   More about Student Spectrometer : The base, Integral with the collimator tube support, carries the swinging telescope arm pivoted on a bearing with spring-loaded end thrust plates; this type of bearing eliminates any slack which would otherwise develop with wear. The collimator and telescope tubes are one- piece precision castings in light alloy, concealed helical-action focusing devices are provided. The collimator slit with spring-loaded jaws is of a robust design which ensures retention of the initial accuracy. The graduated prism table support, 18cm dia, is divided in degrees, the vernier reading to 0.10, is fixed to the telescope arm. This arrangement permits easy estimation to 0.050 from the conveniently positioned vernier scale. The fully adjustable prism table, has screwed holes for the attachment of prism and grating holders, to accommodate prisms upto 38mm high. Large-diameter clamping knobs are fitted for movement control and fine adjustment is provided for the telescope.   Dimensions Overall : 51 x 23 x 22cm lengthxwidthxheight. Without prismDetail : Telescope vernier reads to 1 min of arc. A model for student use with an optical system equivalent to that of more advanced models, thus permitting many quantitive experiments. Graduated disc 127mm dia, fixed to table, double ended vernier to read to 1 min of arc, attached to telescope. Both telescope and table have fine adjustment screws and release of clamping screw enables coarse adjustments to be made by hand. Telescope and collimator are fitted with 178mm focal length, 32mm clear aperture achromatic objective and have rack and pinion focusing telescope fitted with x15 Ramsden eyepiece and crossline graticule, collimator with adjustable slit, length 6mm, mounting on telescope and collimator permits accurate leveling of axis and squaring of axis of roration. The spectrometer table, marked with lines to assist positioning of prism and diffraction grating. Complete in hardwood case with the following accessories : One prism clamp, one diffraction grating holder, one watchmaker's eye glass, one tommy-bar for adjusting optical axis.   Model Number : GP-501.2

• Features: Digital display of frequency, Excellent peaks display, Digital display of Helmoltz Coil Current.

We have different Laboratory Instruments Manufacturer and Consumables related to and used in clinical and research laboratories for the preparation, separation and analysis of samples. A wide classification of Instruments that are used to analyze material samples we have.

We are offering barometer aneroid demonstration model. Abbomedtm wi t h 1 0 0mm d I a l graduated 28 to 31 inch of mercury and 960 to 1060 millibars. With plated bezel, cover glass and index plastic base approx. 16cm diameter. Enclosed in a transparent synthetic case for demonstration purposes. Air tight sealed all round, a pressure bulb is provided to force the movements for educative demonstration

Its optical system and features are equivalent to those of advanced model making it still able for senior students to do many quantitative experiments. Substantial iron casted base with leveling screws, protected graduated disc 150 mm diameter, fixed to table, double ended single vernier reading to 1 minute of arc attached to telescope. Optics Telescope : 178 mm focus achromatic objective, 25 mm clear aperture, 8 X Ramsden eye-piece with cross line graticule, rack and pinion focusing. Collimator Mounted on fixed pillar and fitted with achromatic object glass 178 mm focus, 25 mm clear aperture, adjustable precision slit, rack and pinion focusing. Prism table with leveling screw and its height is adjustable, surface marked with parallel lines to facilitate leveling of prism. Supplied complete with prism clamp and grating holder, watch makers eye lens to read vernier and tommy bar without prism and gratings. Supplied in beautifully polished wooden case with lock and key. Accessories a) Crown glass prism : Equilateral 38 x 38 x 38 mm or 25 x 25 x25 mm as per requirement; Refractive index 1.52, optically worked. b) Dense flint glass prism : 32 x 32 x 32 mm refractive index 1.62; optically worked. c) Extra Dense flint glass prisms : 32 x 32 x 32 mm; refractive index 1.65; optically worked. d) Polariser & Analyser : Polariser and analyser each of 25 mm aperture mounted to fit on to telescope and collimator. e) Quarter Wave Plate: For sodium light, 20 mm clear aperture, in graduated rotary mount reading to 5° , on a metal stage for use in diffraction grating holder of spectrometers. f) Plane Mirror : Silvered both sides, to provide a reflecting surface at the prism table, in metal mount to fit diffraction grating holder. g) Gauss Eye Piece h) Diffraction Grating Replica : 13000 tines persq. inch or 6000 lines per sq. inch or as required.

To verify the relationship between forces action at a point. Comprises board 65x50cm, with two aluminium pulleys 50mm. dia.,on clamp, for mounting in any position. Complete with three hangers iron nickel plated 50gm. and 12 slotted weights of 50gms. each.  

• Packaging Type: Box
• Voltage: 220 V
• Phase: 1 Phase
• Features: Compact design, Easy to operate, High performance
• Brand: Maxwell
• Accuracy: Better Than 0.2 % .
• Frequency: 50 Hz
• Range: 0.2 micro Ohm to 11 Ohms

We offer spectrometer. Student spectrometer of 6 inches.

This is a robust instrument designed specifically for student use which is capable of very high performance. The main structure is of heavy cast metal, with bright plated fittings.Scale : The 150 mm. diameter circle with protective shield is fixed to the telescope movement and the table is attached to the double ended vernier which reads to 1 minute of arc. Both telescope and table rotation fine adjustment screws, and release of a clamping screws enables adjustment of both movements to be made by hand. Collimator : Mounted on fixed and fitted with 178 mm. focus achromatic objectives, 25 mm. clear aperture. Also fitted is a unilaterally adjustable slit, 7 mm. long.Telescope : Mounted on moveable pillar and fitted with 178 mm. Focus achromatic objective, 25 mm. clear aperture. Also fitted is a 8x Ramsden eyepiece and a glass crossline graticule. Both the telescope and collimator have rack and pinion focussing. Means are provided for levelling the axis of both optical units and for squaring them to axis of rotation.