Shree Om Scientific Instruments Mahesh Nagar, Ambala, Haryana

Voltage : 220V

Frequency : 50 to 60 Hz

Specifications : Inner chamber and outer body of SS 304 Heating up to 95°C Digital Temperature Indiacator cum Controller with precise accuracy of ±1°C A Shaking speed range from 40 to 180 strokes special pyramid type cover provided avoids per min Supply: 220-240 Volts 50 Hz Single Phase

Power Source : Electric

Double walled heavy duty with forced aircirculation thermostatically controlled,temperature up to 250°C accuracies ±2°Cto ±5°C with a dial-type thermometer. Towork on 220/230 or 440 V A.C. 1. For 12 trays2. For 24 trays3. For 48 trays4. For 96 trays5. For 192 trays

Benefits : Facilitates lung exercise through deep and prolonged inspiration. Helps in maintaining or regaining fitness of the lungs. Calibrated and clear three stage chambers for efficient exercise. Transparent and calibrated chambers with colour coded triple balls allows visual calibration and estimation of the patient’s lungs fitness progress. Advised during post surgery rehabilitation. Sleek and stable design with soft corrugated tube and mouth piece. With accommodative groove for tubing when not in use. Non Sterile.

Type : Three Ball Spirometer

Material : PVC

Country of Origin : Made in India

Weight : 100-500kg

Voltage : 220V

Automatic Grade : Manual

Single punch for making tablets up to 1000mg and as per the size of the punch 6mm. automatic compression and ejection devise with each revolution of the wheel drive, automatic feed, and removal of tablets. Build on heavy cast body with the acentric pressure system. Stainless steel hopper provided and connected by a rubber tube. Easy setting for thickness and hardness of tablets with nuts and locknuts, set of two spanners provided as necessary tool dia. Heavy duty.

Used to determine the durability and abrasiveness of tablets. A transparent perspex drum (made of important Perspex sheet 6.4 mm thick) 300 mm Diax35mm deep and white cover disc and nut, also a shaped radial fixed blade which Carrier the tablets along with it up to the central height and lets them off while the Drum is rotating. Thus the tablets rub against each other without any hard impact.     The drum rotates at the fixed speed of 30 R.P.M. by a geared motor and the rotation period is controlled by a timer (imported time switch duration 1 to 15 minutes) per Determined end present.   The motor unit is housed in a shaped steel cabinet with a shaft extended on one side upon which the drum rotates. Switches with neon indicators and time switches are fitted on a panel and provided work on 220 volts 50 C/S A.C.

Application : Labouratory Use

Feature : Easy To Use, Electrical Porcelain, Proper Working, Water Proof

Voltage : 220V

Frequency : 50Hz, 60Hz

Power : 3-5kv

Temperature : High Temperature

Automation Grade : Automatic

Application : Coating Tablets

Weight : 100-200kg

Voltage : 220V

Automatic Grade : Automatic

Driven Type : Electric

Warranty : 1year

Material : Stainless Steel

Application : For Physiology, Laboratory Use

Voltage : 220 V

Finishing : Polished

Frequency : 50 Hz

Power : 250-500 W

Driven Type : Electric

Phase : Single Phase

Automation Type : Automatic

The Electrically Opened E-8 recording drum is very suitable for student use and general experimental work. The entire driving mechanism, consisting of constant speed electric motor workable on 220 V AC Hz single phase and gear box contained in the base together with robust plate clutch is a synchronized system. Engagement of the various gear ratios is effected by sliding the lever into the slot marked with the surface speed required. Considered care has taken in selected the gear ratio to provide speed which will be suitable for all student experiments.   Various accessories like Adjustable Stand, Frog Board, Myograph Lever, Muscle Holder, Heart Clip, Starling Heart Lever, Simple Electrode, Tuning Fork, Aerator etc are available to be used along with Kymograph.

Color : White

Warranty : 1 Year

Product Description Design Structures : Aerodynamic, floor mounted Air Flow Type : Automatic bypass type Construction (Exteriors) : Available in two options:- Stainless Steel 304gr. Outside & 316gr. S.S.Inside. Epoxy power coated 18 & 22 Gauge Galvanized Steel Baffle arrangement : 2 Point suction section with baffle to ensure smooth And immediate exhaust of fumes. As per ASHRAE & EN norms. Airfoil : Flush powder coated airfoil mounted on the worktop. Worktop : Available in following options Chemical resistant splash & spiliage proof jet black Granite worktop. Sink, water tap with drain arrangement worktop fitted with oval shaped 100 x 200mm PP cup-sink for drainage. Epoxy top (at extra cost) Stainless Steel 316gr. Sash (Shutter) : Vertical Sliding Counter balanced toughened glass (5mm thick / Polycarbonate fitted in the powder coated Aluminum. Clear sash open height =500mm-675mm According to size & Fume Hood. Service Fittings : Remotely operated color coded ( as per international standard) total three services valves with SS breaded flexible hose & brass fittings (1 for water & 2 for gases). Lighting : CFL tube light (1x36W) with Polycarbonate enclosed for Better Illumination with less power concumption. Electrical utilitie : Four nos electrical sockets 15/5amp & switches, ‘North West / HAVELLS make \ 50Hz switches have LED to Indicators to show ON position of switches to be Provided. Control panel provided with starter for blower. Complete rigid structure to support fume hood. Double skin shutter with self closing hinges. Digital Air Flow : This device is an accessory for fume hood to indicate the Approximate face velocity of airflow with primary Purpose of warning when a low flow condition occurs. Red & LED’s correspond to low & normal flow rates. When flow decreases from normal to low an audible Alarm will also actuate requiring manual Acknowledgement for silence. Centrifugal Blowe : Silent high efficiency blower, consisting of continuous Rating motor and chemical resistant impeller. The blower Designed to give face velocity of 80 to 120 feet/minute (FPM) as per ANSI/AIHA Z9.5 at the safe working Height. Air suction capacity : Silent 650 CFM confirming to international face velocity Norms and a per fume hood airflow pattern. Fume Hood (Stainless Steel) Frame of S.S.304grade from outside & 316 grade inside.

SPIROMETER six lit capacity. provided with a chain compensate counterbalance to float through the pulley, tube calibrated to denote volume, inlet & outlet tubes provided. Complete with corrugated tube and mouthpiece.

It is used for quantitative light experiments. The collimator is fixed on the base and the telescope can be rotated. Concealed helical focusing is provided on the telescope and collimator tubes. The collimator slit has spring-loaded jaws. The graduated prism table has a vernier attached which is fixed on the telescoping arm. The prism table is adjustable with the help of 3 knurled screws and it has screw holes for attaching prism & grating holder.

Voltage : 230V

Application : Rotarod Use

Weight : 10-20kg

Capacity : 20L/Hr

Driven Type : Electric

Temperature Range : 10-20 Deg C

Warranty : 1yrs

Automation Grade : Automatic

rota rod apparatus 4 comp. digi. rpm   rota rod is the instrument meant for studying the effect on the muscle grip strength of mice. a versatile built with lsi chips are equipped with four/ two/three compartments and four/two/three independent 4 digits. digital milliseconds timer for measuring the fall-off time of the mice.   it is also equipped with a motor coupled with a rotating rod whose speed can be varied with the help of the front panel knob marked with an arrow or speed less than 10 rpm.   the skeletal muscle relaxation together with the taming or calming effect these agents reduced anxiety and tension. the loss of muscle-grip is an indication of muscle relaxation, this can be easily checked in animals, using rotarod.   the difference in the fall of time from the rotating rod between the control and treated animals is taken as an index of muscle relaxation. the rate of rotation of the rod should be adjusted such that a normal mouse can stay on the rod for an appropriate period of time.

PERIMETER the perimeter is an instrument for the accurate charting of the field of vision. A vertical stand on witch a METALLIC ARC is pivoted. it also bears a circular black disc to read the meridian in witch the arc in the shape of a semicircle with a radius of 330 mm. It's rotating in any direction and fix at any position with a tightening screw.

Rated Power : 220 V AC Single Phase 50 Hz

Product Description Design Structures : Aerodynamic, floor mounted Air Flow Type : Automatic bypass type Construction (Exteriors) : Available in two options:- Stainless Steel 304gr. Outside & 316gr. S.S.Inside. Epoxy power coated 18 & 22 Gauge Galvanized Steel Baffle arrangement : 2 Point suction section with baffle to ensure smooth And immediate exhaust of fumes. As per ASHRAE & EN norms. Airfoil : Flush powder coated airfoil mounted on the worktop. Worktop : Available in following options Chemical resistant splash & spiliage proof jet black Granite worktop. Sink, water tap with drain arrangement worktop fitted with oval shaped 100 x 200mm PP cup-sink for drainage. Epoxy top (at extra cost) Stainless Steel 316gr. Sash (Shutter) : Vertical Sliding Counter balanced toughened glass (5mm thick / Polycarbonate fitted in the powder coated Aluminum. Clear sash open height =500mm-675mm According to size & Fume Hood. Service Fittings : Remotely operated color coded ( as per international standard) total three services valves with SS breaded flexible hose & brass fittings (1 for water & 2 for gases). Lighting : CFL tube light (1x36W) with Polycarbonate enclosed for Better Illumination with less power concumption. Electrical utilitie : Four nos electrical sockets 15/5amp & switches, ‘North West / HAVELLS make \ 50Hz switches have LED to Indicators to show ON position of switches to be Provided. Control panel provided with starter for blower. Complete rigid structure to support fume hood. Double skin shutter with self closing hinges. Digital Air Flow : This device is an accessory for fume hood to indicate the Approximate face velocity of airflow with primary Purpose of warning when a low flow condition occurs. Red & LED’s correspond to low & normal flow rates. When flow decreases from normal to low an audible Alarm will also actuate requiring manual Acknowledgement for silence. Centrifugal Blowe : Silent high efficiency blower, consisting of continuous Rating motor and chemical resistant impeller. The blower Designed to give face velocity of 80 to 120 feet/minute (FPM) as per ANSI/AIHA Z9.5 at the safe working Height. Air suction capacity : Silent 650 CFM confirming to international face velocity Norms and a per fume hood airflow pattern. Fume Hood (Stainless Steel) Frame of S.S.304grade from outside & 316 grade inside.

Certification : CE Certified

Application : Laboratory

Power : 250W

Power Source : Electric

Warranty : 1year

switches : microprocessor-based switches for blower, led light & uv light with lcd back light display. (uv light with timer)pre-filter : 99.00% down to 5 micron.hepa filter : iso 14644 class5(class100) 99.97%-99.99% down to 0.3 micron. mesh guard for protection of hepa filter.airflow : frontward horizontallynoise level : 60 decibel ± 5%.velocity : 0.35-0.50m/sec.work table : made up of stainless steel 304gr. cock for gas on work table.side panels : 6mm±.5mm thick acrylic sheet. front door : made of acrylic.uv lamp : 15/30w, make philips holland,illumination : led white light.pressure : digital manometer 0-50mm range with filter failure alarm.power supply : 230v ± 10v/50 hz single phase a.c.cabinet : stainless steel 304 grade.heavy duty blower : dynamically balanced with 0.25 hp electric motor mounted on anti vibration pad 1440 rpm motor. working area size   60x60x60cm.working area size   90x60x60cm.working area size 120x60x60cm.working area size 180x60x60cm.

Fitted with speed regulator height & space adjustable 1/20 H.P. AC/DC motor speed of the motor can be controlled through regulator. RPM up to 2000.  

Material : Stainless Steel

Application : Laboratory

Voltage : 220V

Material : Mild Steel

Power Source : Electric

Voltage : 220 V

Frequency : 50Hz

Application : Pharmacy Laboratory