leak test apparatus
Get Price Quote
We offer leak test apparatus (gmp model) small desicator with 6” (150mm) diameter designed and applicable in airproof test of blister pack, strip, foodstuff, pharmaceuticals, dairy and other industries for leak test. * compact gmp model. * diaphragm type vacuum pump. * polycarbonate vacuum desiccators. * vacuum level upto 20" of hg.
kelley ball penetration apparatus
Get Price Quote
1 Piece(s) (MOQ)
We are instrumental in providing our clients a comprehensive range of kelley ball penetration apparatus. Product description:specifications: weight: 15 kg nearest: 0.5 mm
Best Deals from Soil Testing Equipment
DISSOLUTION RATE TEST APPT. SIX STAGE
Get Price Quote
The apparatus consists of 4 parts. A water bath with 500 watt heater covered 1000 mI. vessel made from Borosil glass and digital temperature control. Variable speed motor, with 30cms longs stainless steel shaft. A cylindrical stainless steel basket and a membrane fixing attachment, water bath is made of imported thick Acrylic sheet with transparent cover at top. Temperature of the bath is maintained at 37°C with an accuracy of ±1° C.A cylindrical glass vessel of 1000 ml. capacity with slightly concave bottom has a flenged edge at the top to accept a fitted cover having four holes. One hole placed in the centre. The shaft of the motor is fitted on an up right and has an electronic speed regulating device that allows the speed to be varied from 25 to 250 R.P.M. The shaft is 6 mm dia. 30 cms on with basket fitted at end rotates smoothly and without any significant wobble. The basket consist of two parts one of which is attached to the shaft. It is of solid metal except for 2 mm vent and is screwed on the main shaft.Lower part of the basket is held with this part by means of threading and this allows proper removal of lower part for introduction of the test samples. The detachable part of the basket is fabricated of stainless steel mesh formed into cylinder of size 36 mm x 25 mm dia. The equipment is workable on 220 volts 50 C/S A.C. (b) -do- same as above but Analog type single stage. (c) -do- same as above analog type double,three & Six Stage.
Ampoule Clarity Test Apparatus
Get Price Quote
100 Piece (MOQ)
Fume Hood
Get Price Quote
1 Piece (MOQ)
SIS-1315 Laboratory fume hoods are one of the most important components used to protect laboratory personal from exposure to hazardous chemicals and agents used in the laboratory. When used properly, they exhaust toxic, offensive or flammable materials when the containment of an experiment or procedure fails and vapors or dust escape from the apparatus being used. Cabinet is made of Thick Ply Board / M.S Duly Powder Coated / Stainless Steel (304). Interiors coated with Asbestos / Lead sheets and further coated with fire proof epoxy paint. Working table upto 2 feet is covered with Glazed Ceramic Acid resistant tiles. Working table is covered with Granite/Tiles / S.S. 304. Front door is made of 6mm clear toughened glass. Counter weight balance front door . Vertical sliding facility & the front door can be stopped at any point. Exhaust blower consists of single phase motor which is enclosed in a wooden casing connected with a PVC Exhaust Ducting. OPTIONS:- Base Storage Cabinet & Fire Proof Tiles Stainless Steel Sink (Wash Basin) with water inlet outlet system Working Size:2’x2’x2’3’x2’x2’4’x2’x2’6’x2’x2’8’x2’x2’ Or ANY NON STANDARD SIZE
Fume Hood
64,000 - 98,000 Per Piece
1 Piece (MOQ)
Dissolution Test Apparatus
5,850 Per Piece
1 Piece (MOQ)
Tablet Dissolution Test Apparatus is an instrument for the determination of active drug ingredient in any pharmaceutical formulation – tablet or capsule as per USP, BP and IP specifications.
Disintegration Test Apparatus
15,000 - 20,000 Per Piece
The double basket enclosed with glass tube by clamps holder. The equipment basket work Up & Down the tablets in medium of water movement in glass beakers cap. 1lit. the vertical drive shaft moves Up & Down by 7.5cm driven by geared motor and control by speed regulator provided. The upper end of the shaft fitted horizontal strip with clamps on either side. These clamps hold glass vessels open at both end with S.S mesh wire sheave with rubber ring at lower end, witch drip in water. The apparatus built on sturdy M.S powder coated finished box fitted with acrylic water bath enclosed with glass beakers temp. Control by PID temp. Controller. The panel with all controls switches, indicator and digital timer and temp. With main cord and plug provided. The apparatus Works on 220 volts A.C main.
Dissolution Test Apparatus
Get Price Quote
Dissolution test apparatus on offer consists of water bath with 500 watt heater accompanied by digital temperature control, variable speed motors, with 30 m.m s.s shaft with digital r.p.m. meter, cylindrical glass vessel with the capacity of 1000ml and imported thick acrylic sheet along with transparent cover at top. the apparatus boasts a fine look due to the stirrer shafts of dissolution rate digital control panel.\n \nDissolution Rate Test Equipment\n\nThe Apparatus Consists of 4 Main Parts.\nFirst is Water Bath with 500 Watt Heater with Digital Temperature Control.\nSecond is Variable Speed Motors, with 30 M.M., S.S Shaft with Digital R.P.M. Meter.\nThird is Cylindrical Glass Vessel 1000 M.l.\nFourth is Imported Thick Acrylic Sheet with Transparent Cover at Top.\nYou Can Easily Up and Down all the Stirrer Shafts with Help of Button Switch.\n\nFeatures :\n\nDigital control panel gives a fine look to apparatus.\nBuilt on a sturdy powder coated M.S angle frame covered. with M.S. powder coated sheet.\nTransparent acrylic container with six glass vessels.\nDigital R.P.M. and temperature meters and touch button controller make it easy for operating.\nAll stirrer shafts are made by a stainless steel.\nIndustrial lab. Use apparatus can be provided on order.\n
Digital Tablet Disintegration Test Apparatus
Get Price Quote
1 Piece (MOQ)
Fume Hood
Get Price Quote
Fume Hood
Get Price Quote
1 Piece (MOQ)
Fruit Penetrometer
26,000 Per Box
1 Box (MOQ)
Fruit penetrometers - fruit firmness tester (apples, pears, peaches, etc.) Instrument provides for an accurate index to determine the right period for fruit harvesting and it can monitor maturation progress during cold storage (pulp softening); index unit: kg or lb; accessories included: plungers, splash plate and fruit peeler (all items are stainless steel); on request: professional test stand (ref. 53200SP).
Plastic Kipps Apparatus
Get Price Quote
100 Piece (MOQ)
Fume Hood
36,000 Per piece
1 Piece (MOQ)
Fabricated out of a thick wooden board. It is designed so as to throw out all toxic/harmful vapors & fumes thus protecting costly instruments and the persons working in the lab. Outer is finished with sunmica and inner epoxy painted. The working table top is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counterbalanced weights. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front-facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. To work on 220/230 volts A.C. supply. Working chamber size: 90x60x60cm 120x60x60cm 120x75x75cm 150x75x75cm Product Details : Whole cabinet made of wooden board laminated with sunmica Whole cabinet made of Cold Rolled steel duly powder coated Whole cabinet made out of Stainless Steel. OPTIONAL : High CFM Exhaust System( for duct exceeding 10 feet in length ) PVC Fume Duct (per ft.)
Three Hinged Arch Apparatus
20,000 Per unit
Kaplan Turbine Test Rig
Get Price Quote
KAPLAN TURBINE IS AN AXIAL FLOW REACTION TURBINE NAMED IN THE HONOUR OF DR. B KAPLAN AN GERMAN ENGINEER. THIS TURBINE IS SUITABLE FOR LOW HEAD
Liquid Limit Device
Get Price Quote
1 Set(s) (MOQ)
Glass Agencies EROSE are manufacturer of Liquid Limit Device . Glass Agencies EROSE are manufacturer and exporter of all type of Medical, Laboratory, Ophthalmic and Optometric Instruments.
Ring and Ball Apparatus
230 - 280 Per Piece
10 Piece (MOQ)
Fume Hood
Get Price Quote
Fume exhaust hoods are designed to contain and throw out toxic, obnoxious, pungent smelling gases to protect personnel and equipment in the laboratories. A motor driven dynamically balanced blower with minimum vibration and noise level, creates negative pressure and sucks contaminated air from work area and throws the same in high-up atmosphere through ductings. Fabricated out of thick ply-board clad from outside in laminated sheet and inside Finished in non-corrosive, chemical resistant EPOXY paint. An up-down sliding sash made of Teak wood mounted in thick glass sheet is provided. Fluorescent lighting provided in the chamber. A gas tap and a power plug is also provided. Stainless steel wash basin and suitable water tap is also provided. A work bench with cup-board with Drawers are provided to hold the hood at a suitable level from ground.
3 in 1 soil tester
1,000 - 1,599 Per Piece
1 Piece (MOQ)
Soil Testing Equipment
Get Price Quote
Los Angeles Machine - Consists of a hollow steel cylinder, closed at both ends, having an inside diameter of 700mm and inside length of 500mm. The cylinder mounted on a sturdy frame on ball bearings. The opening is closed dust tight with a removable bolted cover in place. A detachable shelf which extends through the drum catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated at a speed of 30-33 RPM by an electric motor through a heavy duty reduction gear. Fitted with revolution counter and push button starter.
Slump Cone Test Apparatus
1,250 Per Piece
Tablet Friability Test Apparatus
Get Price Quote
SITRO scientific is a leading manufacturer company of "TABLET FRIABILITY TEST APPARATUS". We can provide you best quality product at very competitive price.
Tablet Friability Test Apparatus
84,150 Per Piece
Fume Hood
Get Price Quote
Fume Exhaust Hoods are designed to contain and exhaust toxic, obnoxious harmful vapours, mists etc. particularly for protecting laboratory personnel and equipment. A motor blower system generates negatives pressure within the encloser extracting the contaminated air from the work area and expels it into the outside atmosphere. Highly recommended in different laboratories like biochemistry, soil test, food microbiology pharmaceuticals units, printed circuit board etching and cleaning operations, miniature component assembly etc. These are capable of handling corrosive fumes of sulphuric & Hydrochloric acid etc. CONSTRUCTION: Fume Hoods are made of Stainless Steel 304 grade from outside with working space covered with stainless steel 316 Qlty. Acid resistant. The work surface is fitted with small wash basin of size 250 x 200 x 150 mm depth of Stainless Steel 316 Qlty. with good quality tap. A gas cock is also fitted for gas supply. A sliding slash made of glass moves vertically up and down with concealed counter balanced weight. Chamber is provided with Flourescent Lighting arrangement for easy working. The space underneath at the work-station is provided with storage compartment for proper uses. The front fascia is provided with a panel incorporating 15/5 Amp. socket with switches for light and exhaust system supplied with cord and plug to work on 220/440 Volt 1/3 phase 50 Hz A.C. Front opening of the Fume Hood will be H 585 x W 910 mm. Complete with Exhaust System having 38mm exhaust fan with stainless. steel deck & Duct to take out fumes
Fume Hood
Get Price Quote
We Manufacture Fume Hood that is fabricated out of thick wooden board. It is designed so as to throw-out all toxic/harmful vapors & fumes thus protecting costly instrument and the persons working in the lab. Outer part is finished with Sunmica and inner is epoxy painted. Working table top is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weights. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. The space beneath the work station is provided with storage compartment for general purpose. It is ideal to work on 220/230 volts A.C. Supply. Working Chamber Size3â x 2âx 2â4â x 2âx 2â5â x 2 ½âx 2 ½â OptionalHigh CFM exhaust system (for duct exceeding 10 feet length) S.S. Lining on work benchPVC Fume Duct (per ft.)
Ring and Ball Apparatus
150 - 300 Per piece
2 piece (MOQ)
The ring and ball apparatus consists of a metal ring and a ball, illustrating how materials expand and contract with temperature changes
Swimming Test Apparatus
Get Price Quote
We are offering swimming test apparatus. (a)having 25 cms diameter clear perspex rotating drum with ribs, in a clear perspex tank and a resettable mechanical counter (single chamber). (b) single chamber with digital temperature indicator, digital timer counter. All micro-controller based. Dual chamber is also available on request.
Penetrometer Apparatus
4,700 Per Piece