Spectrometers Dealers in Ambala

• Application: Laboratory Use
• Warranty: 1year
• Overall Dimension: 510 x 230 x 220 mm without prism
• Model: GWL1002
• Surface Finish: Color Coated

Student Spectrometer: The base, integral with the collimator tube support, carries the swinging telescope arm pivoted on a bearing with spring loaded end thrust plates. This type of bearing eliminates any slack which would otherwise develop with wear. The collimator & telescope tubes are one piece precision casting in light alloy, concealed helical action focusing devices are provided. The collimator slit with spring loaded jaws is of a new & robust design which ensures retention of the initial accuracy. The graduated prism table support, 180 mm diameter, is divided in degrees; the vernier, reading to 0.1, is fixed to the telescope arm. This arrangement permits easy estimation to 0.05 from the conveniently positioned vernier scale. The fully adjustable prism table 75 mm diameter is engraved with concentric rings, which facilitates correct location of a prism & has two screwed holes for the attachment of the prism & grating holder, to accommodate a prism upto 25 mm high. Large diameter clamping knob are fitted for movement control & fine adjustment is provided for the telescope. All bright parts are chromium plated with the base & tube in synthetic hammer finish. Overall dimensions 510 x 230 x 220 mm without prism.    Intermediate Spectrometer: Comprises of the following items :  Spectrometer: Telescope vernier reads to 1 min. of arc. A model for student use, with an optical system equivalent to that on more advanced models, thus permitting many quantitative experiments. Graduated disc 127 mm diameter, fixed to table, double ended vernier, to read to one min. of arc, attached to telescope. Both telescope & table have fine adjustment screws & release of clamping screw enables coarse adjustments to be made by hand. Telescope & collimator are fitted with 178 mm focal length, 32 mm clear aperture achromatic objectives & have rack & pinion focusing telescope fitted with 15x Ramsden eye piece & crossline graticule, collimator with adjustable slit, length 6 mm, mounting on telescope & collimator permits accurate levelling of axis & squaring of axis of rotation. The spectrometer table, marked with lines to assist positioning of prism & diffraction grating. Complete in hard wood case with following accessories: One prism clamp, one diffraction grating holder, one watchmakers’ eyeglass, one tommy bar for adjusting optical axis.  Mercury Vapour Lamp: With holder & choke 80W & 120W.  Sodium Vapour Lamp: 45 Watt, 220 Volts  Lamphouse & Transformer: Comprising a lamphouse & transformer. The lamp gives a steady light for high intensity. Special design of transformer ensures that the lamp starts immediately as it is switched on. When mounted on the integral stand, the lamp is enclosed by a cylindrical lamp house with a circular aperture & the light centre height is adjustable from 200 mm onwards. The lamp house is open at the top to allow for ventilation & may be removed for operation on a separate stand, as required. The transformer is housed in a two part sheet steel case with ventilation louvres & has a lamp house supplying rod mounted directly onto the transformer case provide a convenient self contained assembly. A 3 core captive flying lead is provided for mains connection. 

• Collimator Focal Length: 178 mm
• Collimator Aperture: 25 mm (adjustable by pinion & rack), adjustable rectangular slit.
• Telescope Focal Length: 178 mm
• Telescope Aperture: 25 mm (adjustable by pinion & rack), fitted with 10x Ramsden eyepiece with cross line graticule.
• Fixation Stand: Located on the plate, it enables you to precisely position the prism & diffraction grating.
• Reading minute: Resolution to 1 minute of an Arc (SM-7)
• Model: SM-7

Our Advance Student Spectrometer (SM-7/7A) is a solidly - constructed instrument, thoughtfully provided with features and accessories that assist students in making precise measurement of spectral lines or prism angle. High Quality, large aperture optics produce sharp spectral images, while precision machining allows for precise rotation and accurate measurement. The 175mm diameter, precision engraved degree plate is complemented by 2 precision engraved verniers, one on each side of instrument for convenient reading. Nicely packed in Styrofoam box.

RDV-1    A complete and light weight direct vision spectroscope without wavelength scale, for observing visible radiations from 400 to 750 mm.RDV-2    A compact visible spectroscope with wavelength scale which allows the direct reading of spectral length and employs a prism for dispersion. It is also useful for flame test of basic radicals (sodium, strontium, potassium, copper etc.) There is a single eyepiece and independent focussing tube for the graticule, which carries an index at 590mm. with "D", marked right below the scale, (corresponding to the wave length of sodium light) can be calibrated to a known light source by adjustment of knurled screw. The amount of light admitted to the spectroscope can be regulated by a variable slit, adjusted by a knurled ring round the rating tube.

Electron Spin Resonance Spectrometer In this method , use is made of the Zeeman interaction of the magnetic dipoles associated with the nucleus or the electron, when placed in an external magnetic field. Parts of the Instrument: Helmholtz coils with an attachment Sample : DP PH R.F Oscillator ( 10 MHz to 9MHz)

Its optical system and features are equivalent to those of advanced model making it still able for senior students to do many quantitative experiments. Substantial iron casted base with leveling screws, protected graduated disc 150 mm diameter, fixed to table, double ended single vernier reading to 1 minute of arc attached to telescope. Optics Telescope : 178 mm focus achromatic objective, 25 mm clear aperture, 8 X Ramsden eye-piece with cross line graticule, rack and pinion focusing. Collimator Mounted on fixed pillar and fitted with achromatic object glass 178 mm focus, 25 mm clear aperture, adjustable precision slit, rack and pinion focusing. Prism table with leveling screw and its height is adjustable, surface marked with parallel lines to facilitate leveling of prism. Supplied complete with prism clamp and grating holder, watch makers eye lens to read vernier and tommy bar without prism and gratings. Supplied in beautifully polished wooden case with lock and key. Accessories a) Crown glass prism : Equilateral 38 x 38 x 38 mm or 25 x 25 x25 mm as per requirement; Refractive index 1.52, optically worked. b) Dense flint glass prism : 32 x 32 x 32 mm refractive index 1.62; optically worked. c) Extra Dense flint glass prisms : 32 x 32 x 32 mm; refractive index 1.65; optically worked. d) Polariser & Analyser : Polariser and analyser each of 25 mm aperture mounted to fit on to telescope and collimator. e) Quarter Wave Plate: For sodium light, 20 mm clear aperture, in graduated rotary mount reading to 5° , on a metal stage for use in diffraction grating holder of spectrometers. f) Plane Mirror : Silvered both sides, to provide a reflecting surface at the prism table, in metal mount to fit diffraction grating holder. g) Gauss Eye Piece h) Diffraction Grating Replica : 13000 tines persq. inch or 6000 lines per sq. inch or as required.

• Type: Spectrometers
• Application: Laboratory Use
• Weight: 10-15kg
• Condition: New
• Country of Origin: India
• Brand Name: MAYALAB
• Material: Heavy Cast Metal Wtth Bright Plated Fitting
• Size: Standard
• Focal Length: 7 Inch
• Application: Laboratory
• Model Name/Number: Model Name/Number
• Measurement Mode: Rotatable

keeping in mind the vast necessities of the patrons, we are engaged in providing a wide range of laboratory spectrometer. product details: application laboratory use brand labeq scale diameter 170mm independently rotable 0 deg to 360 deg x 1 deg with locking screw mounted collimator mounted on adjustment feature prism table is provided with 3 leveling screws .

We are offering direct vision spectroscope. Adv-1 a complete and light weight direct vision spectroscope without wavelength scale, for observing visible radiations from 400 to 750 mm. Adv-2 a compact visible spectroscope with wavelength scale which allows the direct reading of spectral length and employs a prism for dispersion. It is also useful for flame test of basic radicals (sodium, strontium, potassium, copper etc.) there is a single eyepiece and independent focussing tube for the graticule, which carries an index at 590mm. With "d", marked right below the scale, (corresponding to the wave length of sodium light) can be calibrated to a known light source by adjustment of knurled screw. The amount of light admitted to the spectroscope can be regulated by a variable slit, adjusted by a knurled ring round the rating tube.

Spectrometer, Slide Box, Pipette Stand, Conical Flasks, Sample Container

• Power: 1kw
• Power Source: Electric
• Display Type: Digital
• Name: optical spectrometer for light spectrum use

spectrometer:the base, integral with the collimator tube support, carries the swinging telescope arm pivoted on a bearing with spring loaded end thrust plates. This type of bearing eliminates any slack which would otherwise develop with wear. The collimator & telescope tubes are one piece precision casting in light alloy, concealed helical action focusing devices are provided. The collimator slit with spring loaded jaws is of a new & robust design which ensures retention of the initial accuracy. The graduated prism table support, 180 mm diameter, is divided in degrees; the vernier, reading to 0.1, is fixed to the telescope arm. This arrangement permits easy estimation to 0.05 from the conveniently positioned vernier scale. The fully adjustable prism table 75 mm diameter is engraved with concentric rings, which facilitates correct location of a prism & has two screwed holes for the attachment of the prism & grating holder, to accommodate a prism upto 25 mm high. Large diameter clamping knob are fitted for movement control and fine adjustment is provided for the telescope. All bright parts are chromium plated with the base & tube in synthetic hammer finish. Overall dimensions 510 x 230 x 220 mm without prism.

• Country of Origin: India
• Type: Physics Labware
• Material: Brass
• Color: Grey-silver
• Feature: Easy To Adjust, Flawless Finished, Quality Tested
• Material of Construction: Brass
• Pack Type: Box

"College type. Read by two opposite verniers reading to one minute of the arc. The objectives used in telescope and collimators are achromatic and provided with rack and pinion focusing arrangement. Telescope arm and prism table are provided with fine and coarse adjustment. The prism table is provided with three leveling screws and is engraved with concentric ring and lines. The scale and verniers are of stainless steel and are machine divided. Cover plate protects the scale from dust and carries two transparent windows for verniers. The instrument is finished in pleasing and smooth duco colour and other necessary parts are chromium plated.    With prism clamping device and diffraction grating stand in polished wooden case: 6” dia circle reading one minute,   6” dia circle reading 30 seconds, 7"" dia one minute, 7” dia circle reading 30 seconds   Application/Usage To determine the refractive index and dispersive power of prism material by spectrometer To determine the dispersive power of prism.

• Features: Digital display of frequency, Excellent peaks display, Digital display of Helmoltz Coil Current.

We offer spectrometer. Student spectrometer of 6 inches.

We are offering vksi spectrometer, * graduated scale of 150mm (6 inches). * heavy pattern body. * adjustable prism table marked with grooved lines. * eyepiece and rack pinion fine focusing.

We are considered as credible Manufacturer, Exporter and Supplier of Advanced Spectrometer in Ambala Cantt. (Haryana). Advanced Spectrometer that we offer has sturdy construction and has all the features that easily allow precise measurements of prism angle or spectral lines. Our Advanced Spectrometer is available with 5� or 6� S.S. Scale. Specialties High QualityLarge aperture optics Sharp spectral imagesEasy precision machining Precise rotation Accurate measurement Specifications Resolution to 1 minute of an Arc.The 125mm or 150mm diameterPrecision engraved degree plate is complemented by 2 precision engraved verniers, one on each side of instrument for convenient reading. Details CollimatorFocal Length : 178 mmAperture : 25 mm (adjustable by pinion & rack), adjustable rectangular slit.Telescope Focal Length : 178 mm,Aperture : 25 mm (adjustable by pinion & rack), fitted with 10x Ramsden eyepiece with cross line graticule.Eyepiece : Ramsden x10 fitted with cross wire.Fixation Stand :Located on the plate, it enables you to precisely position the prism & diffraction grating. Supplied in wooden case.Reading minute : 1min. or 30 sec.

Spectrometer experiments exp-1 to determine the refractive index of the material of prism using sodium light. Exp-2 to determine the dispersion power of a prism. Exp-3 to determine the resolving power of the prism. Exp-4 to determine the wavelength of sodium light using a plane diffraction grating. Exp-5 to determine the resolving power of a plane diffraction grating. Exp-6 to verify cauchy�s equation (mercury light source required). From our wide range of products, we offer optimum quality spectrometry kit. The offered kit is manufactured using best quality basic materials and latest technology. We offer this kit in diverse technical specifications, in order to meet requirements of our esteemed clients. Apart from this, our offered kit is meticulously tested by our experts on distinct parameters to deliver a faultless range at our client's end. Features: compact design high operational fluency easy to operate principle and working : the working of a spectrometer is based on the principle that when light falls on an optical device such as a prism or diffraction grating each wavelength is refracted or bent by a unique angle. A precise spectrum can be determined by measuring the angles at which light is refracted or bent. Contents: spectrometer 1 intermediate spectrometer 1 spectrometer-goniometer 1 sodium light source 1 prism 1 diffraction grating 1 micrometer slit 1

The Spectrometer is College type and read by two opposite verniers reading to one minute of the arc. The Spectrometers used in telescope and collimators are achromatic and provided with rack and pinion focusing arrangement. Telescope arm and prism table are provided with fine and coarse adjustment. The prism table is provided with three leveling screws and is engraved with concentric ring and lines. The scale and verniers are of stainless steel and machine divided. Cover plate protects the scale from dust and carries two transparent windows for verniers. The instrument is finished in pleasing and smooth deco color and other necessary parts are chromium plated. With Prism Clamping Device And Diffraction Grating Stand In Polished Wooden Case5�dia circle reading one minute6� dia circle reading one minute6� dia circle reading 30 seconds7� dia circle reading 30 seconds

These Direct Vision Spectroscope are used to observe radiations from 400 to 750 mm. We are staffed with the most up to date machines and cutting-edge technology for the testing of raw material and thus, with without fail we carry out stern quality examinations of the same at the initial stages. Before making the final dispatch of the orders, the entire range is strictly checked against varied quality parameters.

Telescope vernier reads to 1 min. of arc. A model for student use, with an optical system equivalent to that on more advanced models, thus permitting many quantitative experiments. Graduated disc 127mm diameter, fixed to table, double ended vernier, to read to one min. of arc, attached to telescope. Both telescope & table have fine adjustment screws & release of clamping screw enables coarse adjustments to be made by hand. Telescope & collimator are fitted with 178mm focal length, 32mm clear aperture achromatic objectives & have rack & pinion focusing telescope fitted with 15x Ramsden eye piece & cross line graticule, collimator with adjustable slit, length 6mm, mounting on telescope & collimator permits accurate leveling of axis & squaring of axis of rotation. The spectrometer table, marked with lines to assist positioning of prism & diffraction grating. Complete in hard wood case with following accessories: One prism clamp, one diffraction grating holder, one watchmakers’ eyeglass, one Tommy bar for adjusting optical axis.

Designed with utmost precision, Spectrometer is used to perform spectroscopy experiments in numerous laboratories. The Spectrometer is mounted on a stable base with attached collimator and rotating telescope platform. Available at reasonable prices, our Spectrometer is widely demanded by the customers for their supreme quality, precise reading and high reliability. Further, we provide Spectrometer in optimum quality wooden storage box with 18″” x 12″” x 12″ dimensions. Features : 2.6cm diameter achromatic optical system with a 10x eyepiece and crosshair 16cm diameter 360 degrees x 0.5 degrees enclosed graduated circle with a double ended external 0-30′ x 1′ vernier, and 2 built-in scale reading magnifiers 8cm diameter grating prism table with an engraved ring pattern 6mm slit, opening to 2mm

The Physics Lab Equipment that we bring forth has won the appreciation of the clients with its high quality. The range of equipment includes all the essentials that are required in the Physics laboratory. The Physics Lab Equipment is made using high grade components as a result of which the equipment has a long service life. The Physics Lab Equipment is used extensively among clients. The Equipment is reliable and delivers accurate readings and results. Used in SchoolsCollegesEducational institutions To inquiry about the desired product(s), just check the box and then click �Inquiry Now� button which is provided below.

PRODUCT DETAILS "Cowbell" A precise instrument for measuring the composition of light, determination of refractive index of solids or liquids and exploring other related optical concepts. Allows students to perform prism and grating spectrometry. High quality optics ensures sharp spectral images while precision machining and fitting allows for precise rotation and accurate measurement. The turntable is mounted on heavy bearings and can be rotated about vertical axis. Streamlined body to avoid crevices around fittings. Holding pillars for both, telescope and collimator, of solid metal block to provide ruggedness and durability. Has a heavy, sturdy, stable cast metal base, with scratch resistant epoxy-coating. The general finish of the apparatus is similar to that of the intermediate model. The instrument is mounted on a baseboard, which fits into a polished hardwood case. Scale: Main scale about 150mm in diameter is fixed on the turntable that also holds telescope. Scale is precision engraved 0-360º × ½º, which is further complimented a precision engraved, double ended verniers provides convenient reading with a least count of 30”. Rotations of both the scales, main as well as vernier, have fine adjustment screws, and release of a clamping screw enables coarse adjustment to be made by hand. Collimator: Mounted on fixed pillar and fitted with 178mm focus achromatic objective, 32mm clear aperture. A unilaterally adjustable slit, 6mm long is also fitted. Telescope: Mounted on moveable pillar and fitted with 178mm focus achromatic objective. Also fitted is a 15× Ramsden eyepiece and a cross-line graticule. Both the telescope and collimator provided with rack and pinion type focusing mechanism for ease in operation and precise focusing. Means are provided for aligning the axes of both the optical units and for squaring them to the axis of rotation. Prism Table: The table is marked with grooved lines to assist placing the prism with respect to the table leveling screws, and has interchangeable clamping units for the prism and a diffraction grating. Standard Set of Accessories, supplied in case: • Dense Flint Glass prism -1 No. • Prism clamp – 1 No. • Diffraction grating holder – 1 No. • Watchmaker’s eyeglass – 1 No. • Tommy bar / L Key for adjusting optical axis of tubes – 1 No. • Polished hardwood case.

It is used for quantitative light experiments. The collimator is fixed on the base and the telescope can be rotated. Concealed helical focusing is provided on the telescope and collimator tubes. The collimator slit has spring-loaded jaws. The graduated prism table has a vernier attached which is fixed on the telescoping arm. The prism table is adjustable with the help of 3 knurled screws and it has screw holes for attaching prism & grating holder.

Owing to the hard work and goodwill, our name features in the list of the vital manufacturers and exporters of Table Spectrometer from Ambala, Haryana, India. Our high-tech manufacturing unit and team of workers carefully manufacture the product using advanced machinery and modern equipment. Our range of products is comfortable to use and promises durability and low maintenance cost.   More about Student Spectrometer : The base, Integral with the collimator tube support, carries the swinging telescope arm pivoted on a bearing with spring-loaded end thrust plates; this type of bearing eliminates any slack which would otherwise develop with wear. The collimator and telescope tubes are one- piece precision castings in light alloy, concealed helical-action focusing devices are provided. The collimator slit with spring-loaded jaws is of a robust design which ensures retention of the initial accuracy. The graduated prism table support, 18cm dia, is divided in degrees, the vernier reading to 0.10, is fixed to the telescope arm. This arrangement permits easy estimation to 0.050 from the conveniently positioned vernier scale. The fully adjustable prism table, has screwed holes for the attachment of prism and grating holders, to accommodate prisms upto 38mm high. Large-diameter clamping knobs are fitted for movement control and fine adjustment is provided for the telescope.   Dimensions Overall : 51 x 23 x 22cm lengthxwidthxheight. Without prismDetail : Telescope vernier reads to 1 min of arc. A model for student use with an optical system equivalent to that of more advanced models, thus permitting many quantitive experiments. Graduated disc 127mm dia, fixed to table, double ended vernier to read to 1 min of arc, attached to telescope. Both telescope and table have fine adjustment screws and release of clamping screw enables coarse adjustments to be made by hand. Telescope and collimator are fitted with 178mm focal length, 32mm clear aperture achromatic objective and have rack and pinion focusing telescope fitted with x15 Ramsden eyepiece and crossline graticule, collimator with adjustable slit, length 6mm, mounting on telescope and collimator permits accurate leveling of axis and squaring of axis of roration. The spectrometer table, marked with lines to assist positioning of prism and diffraction grating. Complete in hardwood case with the following accessories : One prism clamp, one diffraction grating holder, one watchmaker's eye glass, one tommy-bar for adjusting optical axis.   Model Number : GP-501.2

ALPHA CHEM- 324 FTIR Spectrometer              Specifications:   Spectral Range 7800 to 350 cm-1   Resolution Better than  0.85cm-1   Wave Number ±0.01cm-1   Scanning Speed 5-step adjustable for different applications   Signal to noise ratio better than 15,000:1   (RMS value, at 2100cm-1, resolution: 4cm-1, detector: DTGS, 1 minute data collection)   Beam splitter Ge coated KBr   Infrared Source Air-cooled, high efficiency Reflex   Detector DTGS   Data systemCompatible computer   Software FT-IR software contains all routines needed for basic spectrometer  operations, including library search, quantitation and spectrum export IR Library 11 IR libraries include