Sri Sai Scientific Ganesh Vihar, Ambala, Haryana

\nWater Bath Rectangular is Suitable for Evaporating Liquids like Alcohol or for Melting Solids such as Agar. Conecntric Rings Can Be Removed to Accommodate Containers of Various Sizes. Double Walled Chamber Made of Stainess Steel and Outer Wall Made of Thick Mild Steel Finished with Powder Coating or Stainless Steel.\nThe Double Walled Chamber is Filled with High Grade Insulation to Prevent Heat Loss. this is Provided with Isi Mark Heating Device, Controlled By Capillary Type Thermostat from Ambient to 110 Degree C, Within =-1 Degree C, Two Indicator Lights & One On/off Rotary Switch.\n

Driven Type : Electric

Power : 3-6kw

Voltage : 220V

Certification : CE Certified

Shape : Rectangular

Material : Mild Steel

Type : Automatic

Warranty : 1 Year

Constructional & Salient Features\n\nInner/Outer Surface made of stainless steel.\nSupporting Ring & Legs are made up of Mild Steel\nHeater cover with stand\nBucket is made of Stainless Steel Sheet\nLid is made of thick machined Mild Steel plate lined with Stainless Steel from inside\nLid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, and water level indicator\nDrain Valve facilitate easy cleaning of the chamber\nFitted with silicon rubber gasket\nAll internal joints are argon arc welded\nPressure Control Switch and Low Water Level Cut-Off system for general safety of the element\nOperating range from 15psi to 22psi pressure\nWorks on 220/230Volts, 50/60Hz AC supply\n\nOptions\n\nPLC Controller Provider\nDouble/Triple Wall\nAnalogue 0-60 minutes ON/OFF mechanical timer\nDigital ON/OFF timer with LED display\nVacuum Pump\nElectrically Controlled Water Inlet Valve\n

Surface Finishing : Polished

Power : 1-3kw

Voltage : 380V

Certification : CE Certified

Shape : Round

Material : Stainless Steel

Type : Vertical

Warranty : 1 Year

VACUUM PUMP OIL SEALED

VACUUM PUMP OIL SEALED

A PORTABLE DIAPHRAGM TYPE VACUUM PUMP CUM AIR COMRESSOR, OIL FREE

U.V CABINET FOR VIEWING & DETECTING PREPARED SUBSTANCE AN T.L.C. PLATES AND A NUMBER OF OTHER LABORATORY & INVESTIGATION WORK. THIS CABINET IS FITTED WITH ONE LONG U.V., ONE SHORT U.V. AND ONE VISIBLE TIGHT. AN EYE PROTECTIVE GLASS WINDOW IS ALSO PROVIDED ON THE TOP FRONT FOR VIEWING THE SAMPLES. .

Tablet Making Machine is built on heavy cast body with centric pressure system steeliness steel hoper provided. For thickness and hardness of tablets with nuts and locknuts, it is connected by a robber tube easy setting. We also make available heavy duty electric model along with necessary tool die and set of two spanners. For making tablets, it has a wheel which is easy to rotate.   Features : Easily rotating wheel for making tablets. Compressing lever for adjustable harness of tablets. Adjustable lower punch for adjusting the thickness. Stainless steel day and punch size 6, 9,12mm. Net weight approximately 65k.g Electrical model can be provided in same with ½h.p motor. Industrial use tablet machine can be provided on order

Type : Automatic

Certification : CE Certified

Weight : 100-500kg

Voltage : 380V

Power : 3-5kw

After-Sales Service Provided : Spare Parts

The oil immersed gear box of 12” dia stainless steel with F.H.P. motor drive air blower operates independently. Tablet Coating Pan thermostatically controls the air to maintain the temperature from 30 to110C. The switches of motor blower heater and thermostat are there on panel neon indigator. It comes in light body as well as heavy body with 1/2HP motor and gear box. Such quality is offered at marginal rates.

Type : Automatic

Certification : CE Certified

Application : Coating Tablets

Voltage : 220V

Power : 3-6kw

Driven Type : Electric

Warranty : 1 Year

Details :\n\nStatic Pass Box made of stainless steel 304 grade, double walled complete with magnetic interlocking system on two doors.\nElectro - Magnetic Interlocking on two doors\nDoor release button with slave display\nAccess Panel & Limit Switch\nMicroprocessor based control system with One Master & Inbuilt U.V. hour meter with hour timer reset Option.\nUV light, fluorescent light.\n

We offer the latest model of automatic Slide Cabinet that is designed for utmost convenience while use and to provide brilliant projection suitable for large gatherings. The Slide Cabinet we supply has a remote control focusing system and automatic slide changing mechanism (backward & forward movement). This Slide Cabinet is assembled from best quality imported mechanical and optical components. The high-class optics and powerful cooling system of the Slide Cabinet provide excellent projection and also enable prolonged projection of individual slides. Further, the Slide Cabinet is equipped with 24 150 W halogen lamp linear slide magazine for projection 3638 slides at a time (circular sliding tray optional).

We manufacture high quality Rotary Shaker. It body is made out of thick mild steel, which is finished in staving enamel paint. Heavy-duty motors of suitable capacities are provided for long time, continuous operation. Fixed speed and variable speed models are offered. Platform is provided with rubber discs to hold flasks. To work on 220 V AC SO Hz single phase.Capacity   25 flasks x100ml 15 flasks x 250ml 25 flasks x 250ml 36 flasks x 250ml 49 flasks x 250ml 81 flasks x 250ml 81 flasks x 500ml Optional : 0-60 minutes timer

ROTA MANTLE IS A COMBINED MECHANISM. IN THIS UNIT MAGNETIC STIRRER IS FIXED BENEATH THE HEATING MANTLE.

RETORT STAND MADE OF MILD STEEL SHEET WITH LEVELLING SCREW, WITH NON RUSTING NYLON FEET. ONE FOOT IS ON A SCREW FOR COVENIENT LEVELLING OF THE BASE ON UNEVEN SURFACES. (PLEASE SPECIFY THE THICKNESS BEFORE PLACING ORDER) 

RETORT STAND MADE OF MILD STEEL SHEET, BEND TYPE POWDER COATED

RETORT STAND MADE OF CAST IRON, WITH SIDE RUBBER FEET, POWDER COATED

RETORT STAND MADE OF CAST IRON WITH POWDER COATED

retort ring made of mild steel rod, powder coated with t screw.

Material : Mild Steel

Diameter : 50-100mm

Thickness : 25-50mm

Feature : Attractive Look, Fine Finishing

Finishing : Powder Coated

The body and lid of the Portable Autoclave is constructed of deep drawn aluminum sheet. To give a pleasant aesthetic look to the Portable Autoclave, the outer is finished with powder-coated paint. This Portable Autoclave is provided with double safety valves, pressure gauge and pressure release valve. This Portable Autoclave can maintain pressure up to 1.2 KG. cm. 2 A tripod stand is provided in the unit for keeping bowls, etc. The Portable Autoclave we supply is also fitted with ISI marked water heaters or gas stove as desired. Range : Autoclave vertical double walled Autoclave vertical triple wall Autoclave horizontal cylindrical Autoclave horizontal rectangular

Type : Portable

Material : Mild Steel

Shape : Round

Thickness : 5-10mm

Certification : CE Certified

Voltage : 240V

Power : 3-6kw

Surface Finishing : Polished

PHYSICAL WEIGHT BOXES, WEIGHTS ARE MADE OF BRASS , COMPLETE WITH FRACTIONAL WEIGHTS AND FORCEP

Positioned amidst the foremost Manufacturers, Exporters and Suppliers of Pharmaceutical Tray Dryer; we are customers’ reliable choice in this sphere. The offered Pharmaceutical Tray Dryer is designed in the state of the art unit using cutting-edge technology. Staffed with pool of professionals; they makes certain that the Dryer is sternly examined on several quality parameters.More About Pharmaceutical Tray Dryer :Standard sturdy double walled fabrication wherein inner chamber is made of polished stainless steel and outer chambers made out of thick mild steel sheet. Outer body painted with superior quality powder coating. Gap between the two walls is filled with glass wool for better temperature insulation. Heavy duty air blower is provided to constantly circulate hot air to achieve uniform temp. In the whole Chamber Double wall door is mounted on heavy hinges provided with heavy molded latch. Temperature is controlled by digital PID temperature controller. Temperature range - 50oC to 100oC. \n   \n Technical Specifications : \n \n Triple wall construction \n Inner chamber of stainless steel \n Outer body made of mild steel with powder coating \n Aluminum trays of size 16”x32”x1.5” \n Tray capacity : 48 trays (can be increased or reduced as per requirement) \n Temperature controlled by microprocessor based PID controller \n “U” type SS heaters for longer life an easy replacement of the same. \n Heavy duty aluminum blower fitted on top for uniform drying. \n Unit mounted on castor wheels for ease of the movement of unit. \n Air inlet and outlet arrangement fitted with air filter. \n Total load of the unit : 4.5-6KW \n Unit workable on 220/440 volts AC \n

Certification : CE Certified

Voltage : 220V

Warranty : 1 Year

Fully Stainless Steel 304

The Student Organ Bath we offer has been designed mainly for students and researchers to carry out experiments on smooth muscles and body tissues. This Student Organ Bath is however quite suitable for general use as well. The water container of this Student Organ Bath consists of a bottomless screw cap jar that has the capacity of approximately 2 liters. This jar is fitted into a threaded metal stand in which is also located a wire wound heater to maintain the water temperature.

S.S. WITH WOODEN HANDLE

Temperature Range and ControlAvailable with temperature range of 2°C to 8°C However these cabinets can also be made with specific temperature range as required by the customer. For accurate measurement and display of temperature a LED or LCD display is used. These units are equipped with microprocessor based digital control panel which is operated with push buttons. For security and safe working high and low temperature alarm system is used.Refrigeration SystemEquipped with full functional cold storage facility. Refrigeration system is energy efficient, environment friendly, completely airtight and can be roof top or wall mounted. This refrigeration system can also be installed as remote equipment where noise or heat can be a nuisance. The evaporator is equipped with automaticelectric defrosting. Featuring noise less compressor and air cooled condenser (water cooled condenser on demand) this cooling system provides full value of money.ConstructionDouble walled construction and made of 304 grades corrosion resistant stainless steel. For insulation high pressure-injected polyurethane is used for minimizing thermal loss and meeting the particular requirements of refrigeration in mortuaries.Doors \n \n Doors are made of stainless steel and fitted with external lock for security. These doors are situated in front and allows easy loading of trolleys. These doors feature lining in odorless rubber gasket and anti-condensation resistors.Internal Lighting \n Lighting system comes with waterproof fluorescent ceiling lamps which are fitted with a switch on the control panel. \n \n AccessoriesSupplied with a number of optional accessories to provide easy accessibility of machines such as casters, Stabilizer, Loading Trolley, Certificate it will also be provided on request.

Material : Stainless Steel

Application : Hospital

Voltage : 200-250v

Finishing : Polished

Phase : Double Phase, Single Phase