Steam Engine Dealers in Ambala

Operation of a commercial steam engine is well illustrated with this working model. The extra large size unit is provided with a horizontal boiler with a whistle, safety valve, steam gauge, on metal base. Operates on 220V A.C. 50 Hz.    

It consists of a powerful fixed cylinder engine with a slide valve driven from a crankshaft eccentric. The engine is provided with a double take-off pulley and is mounted on a metal base.

SARVANG VASHAPA SWEDAN YANTRA (TROLLEY TYPE) Sarvang vash yantra hardwood constructed, with three acrylic windows, on each side. Steam is generator with safety devices. The steam passes in sarvang yash yantra from one sides & can be controlled by controller. A special moving trolley with perforated bed, where patient lies, is an integral part of the unit. Fitted with digital temperature controller device for temperature visibility. Stainless steel tray under the perforated bed for waste water collection and drainage system must be provided, all the unit must be coated by polyurethane coating for protection from moisture, over all size is 84″ x 36″ x 24″.

• Model: HV-EXP4413

The unit contains the key components of a steam power plant: a gas-heated boiler, a double-acting single-cylinder piston steam engine with generator, a condenser and a feed water supply with tank and pump. All necessary safety devices are fitted. A supply of mains electricity, water and propane gas are required for operation..

Full-body steambath, made of water resistance hard-wood and teakwood. Speciffically designed as a box for weak patients to have steam bath in lying down position. Patient’s head rests on wooden pillow out side the chamber and body rest on wooden mesh inside the box. The lid is fitted with fiber glass covering, lid opens on hinges for convenience of the patient to enter. Steam is generated electricaly, inside the yantra, in stainless steel open boiler with 3 x 1kw. Heaters and steam spreads uniformly. A stainless steel mesh box is provided with boiler to place medicinal leaves/roots inside the boiler. Note: if requested the boiler can also be fitted with lpg gas burners at extra cost. Overall approximate size: 84″ x 36″ x 24″.  

It is an all-metallic construction model showing metal cylinder in section cut and is covered with a glass plate. Complete with working parts like piston, slide valve, link motion and reversing method can be demonstrated. The movement of the wheel is very smooth to demonstrate the working even by blowing from mouth.

Locomotive design, sectional, the valve and piston mechanism clearly visible through a glass plate with forward and reverse motions, demonstrates working with an air blower or even with mouth blowing.

MODEL OF STEAM ENGINE Locomotive design showing cross section of the piston and sliding valve as positioned in the steam chamber (Cylinder), clearly visible through air tight glass plate with forward and reverse motion, smooth enough to demonstrate working even by blowing. Other parts are also clearly visible such as crankshaft, valve control, drive wheel etc. Mounted on heavy metal base.

Steam Engine, Rheostats, Soxhlet Extraction Unit, Ripple Tank

Steam Engine Demo Model, Medical Microscope, Industrial Microscope