Tables Dealers in Saha, Ambala

• Model Number: ALPHA CHEM-406A
• Brand Name: ALPHA CHEM

We are offering force table. Force table : alpha chem-406 a - two verify the laws of triangle parallelogram and polygon of forces, comprises of a circular 40 cm dia aluminum disc. Graduated in 360 degrees. Complete with leveling screws clamping device to fix the table at any desired angle five sliding clamp, pulleys, central ring, string & five sets of iron nickel slotted wts. Each set containing nine weights and one hanger of 50 gm cap. Alpha chem-406b- for verifying the laws of composition and resolution of forces, comprising a machined aluminum table 40cm dia. Its raised rim has engine divided scale graduated 360°, on heavy vertical support rod and tripod base. Complete with 1 ring, 4 sliding clamp pulleys, 4 weight hangers and 12 weights.

Vibrating Table : It is designed to carry a load of 140kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrator clamped to imparted by means of off-balance masses rotating on a shalf of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking of the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the frequency to be varied steplessly between a maximum of 3600 vibrations down to 2600 vibration per minute. A speed regulation handle is provided for increasing or decreasing the frequency. A switch is provided for starting the motor. suitable for operation on 440 volts, 3 phase, 50 cycles, A.C.Supply. Note: Vibrating Tables of table top size 75cm x 75cm as well as 100cm x 100cm are also available.

Fabrication as in above model but Table Top provided with suitable slit for print - outs. Size - 67 x 55 x 75 cm. (27" x 22" x 30")

Beb labour and delivery mainly made of mild steel. Bed top of two section, Body section mounted on rubber stumps and legs section on two castors with brake. Legs section can be completely recessed under the body section. Mattress 60 mm thick foam covered with water proof synthetic material. Table consisting of pair lithotomy poles with strip or knee pad & stainless steel bowl arrangement underneath of leg section. Finish in epoxy powder coated. Size body section app. 1000(L) x 770(W) x 760(H) mm. And leg section app. 930(L) x 640(W) mm.

Offered in the market at nominal rates, our range of Force Table is loved by our clients, and for the finest quality, we process these in compliance with the industry norms. While we offer the finest quality of products to our clients, the USP of our range of tables is that these are corrosion resistant, have high tensile strength, and guarantee longevity. While we package this product using premium materials and ensure timely delivery of the product, we source these from reliable vendors in the market. We are located in Ambala, Haryana, India.   Details : For verifying the laws of composition and resolution of forces, comprising a machined aluminium table 40cm dia. Its raised rim has engine divided scale graduated 360o, on heavy vertical support rod and tripod base. Complete with 1 ring, 4 sliding clamp pulleys, 4 weight hangers and 12 weights (2x10g, 2x20g, 4x50g, 4x100g).   Model Number : GP-814.1

• Country of Origin: Made in India
• Brand Name: TILAK
• Usage/Application: Laboratory

• Country of Origin: India
• Type: Tables
• Material: Wood
• Shape: Rectangular, Round, Square
• Thickness: 40-50mm, 50-60mm, 60-70mm, 70-80mm, 80-90mm, 90-100mm
• Application: Bed Room, Home Office, Living Room, Study Room
• Color: Brown, Natural
• Feature: Crack Proof, Easy To Place, Good Quality, High Strength, Termite Proof
• Pattern: Natural Grains pattern
• Appearance: Antique, Common, Modern
• Finishing: Non Ploished, Polished
• Height: 25inch, 30inch, 32inch

• Country of Origin: Made in India
• Usage/Application: Laboratory

Overall height 43 cm, for use in vertical and horizontal position, fitted with hand wheel and belt drive pulley. Suitable for use with Savart's wheel. Siren disc or Colour discs or centrifugal governor but without it shown in the picture.

Frame made of CRCA pipe.Two sectional top, head section adjustable on ratchet.Fitted on four rubber stumps.Technical Specification :Size: 183 L x 61 W x 76 H cms.

We are acclaimed as a reputed Manufacturer and Supplier of Slide Warming Table from Haryana, India. We make available these tables in different styles and sizes as per the requirements of our clients. They are made up of high quality material and have long service life. Our Slide Warming Tables have thermostatically controlled uniform temperature and their top is made up of anodized aluminium or stainless steel. Contact us for the most reasonable prices!

We are offering operation tables, made entirely from stainless steel, in two halves slopping towards the centre a small wedge over the whole length separates the two halves, under the wedge provided a brass drain pipe. Removable and replaceable by sliding in or out blood and other fluids flow towards the centre of the table, from where these drip into the drain pipe and carried through an end drain tube to the receptacle after operation the whole top can be washed clean the drain pipe removed, cleared and replaced the s.s. Top is heated a set of electric lamp, placed to effect balanced heat distribution, dog holder with its s.s. Upright slide along slot in the top useful for fixing accessories a.s.s. Swing tray is fitted on a upright in one corner of the top useful for placing dissecting instruments accessories etc. Steel pipe frame handle and wheel for conscience in moving. Table top size 51”×18”×40” high. (b) –do—small type for frog, rabbit guinea pigs etc.

Gynecological Examination Table. Construction made of stainless steel square or round type tube in two portion of the table one portion duly fitted with wooden top covered with high density of foam and finished with semi leather type material water proof nature, one basin of stainless steel duly fitted with the foot side of this portion of the table that can be easily removable for cleaning , the basin fitted in the stainless steel ring which is also removable two lithotomy legs fitted with foot side of the table and upper portion of the lithotomy legs duly covered with the foam padded and semi leather water proof material for finishing, the lithotomy legs has facility for height adjustment with help of knob, second part of the table which is also constructed with stainless steel and top made of wooden frame with high density of foam and duly covered with semi leather type waterproof material, the part two is movable type and moves on wheels two with lock and two without lock. Dimensions complete table: 180 x 55 x 80 cm.A Delivered with the following accessories: 1 Pair of padded shoulder pads, 1 Stainless bowl, sliding under the seat,1 Pair of padded leg holder of gynaecology examination table.

Gynecological Examination Table made of metal frame of square pipe of heavy gauge head side adjustable with the manual mechanism with the help of handle it allow any desirable position to head side portion as per the requirements of the user.  Foot side of the table have mechanism to adjust the height of that portion as per user requirements, there is U cut of the foot side portion and that allow to access the Stainless steel Basin placed on the table. The top of the table fitted with high density foam covered with Rexine cover water proof material overall size of the table 72″x20″x32″ the supporting rods with leg holding straps provided with the arrangement of height adjustment as per the requirements, height adjustment of the rods can be placed with the help of the knob. there are head holders on the both side of the table to hold the head of the patient dury the Delivery pains, the head holders are also adjustable as per patient requirements, both the head holder are duly foam padded for comfortable holding of the head.

Telescopic Delivery Table, Schering Bridge, Heat Cylinders Set, Voltmeter

• Material: Cast Iron
• Height : 20 inches
• Thickness: 1/2 inches

Manual Table for Slit Lamp / Synoptophore / Keratometer.

• Brand Name: Reliant Lab
• Color: Blue, Grey, White
• Usage: Laboratory
• Material: Cast iron 
• Application: Experimental study
• Diameter: 6 inch
• Product Type: Physics Lab Equipment
• Quantity Per Pack: 1

BIS-1199. The Flow Table is designed for determining the flow of Portland cement concrete.   The Flow Table top is 76.2 cm (30 inch) dia, finely machined Steel/Brass. The integral cast ribs designed for support and strength. The stand is fabricated out of cast iron and is of sturdy construction. Holes for mounting on foundations are drilled in the base plate. The ground has hardned steel cam is designed to drop the table by 12.5 mm. A Flow Mould with handles, 12 cm height having 17 cm top internal diameter and 25 cm base diameter and a taping bar 16 mm dia x 60 mm long are also provided. Flow Table, Manually Operated. Supplied complete with a hand weel.

We are offering motorized table etc. Our clients can avail a wide range of power instrument tables to our clients. These products are of height minimum 675mm height maximum 875mm. Stringent test are ensured at all levels to ensure its capability. Our range is highly appreciated by our clients for its performance and quality. We offer these products at market leading prices. height minimum 675mm height maximum 875mm vertical traveling range 200mm load maximum 80kg. table top size 570x400x24mm power supply ac 220/110v, 50/60 hz power consumption 24 volts dc weight(actual) 20kg. up & down movement by feather touch switch mounted with wooden top.

Made entirely from stainless steel, in two halves slopping towards the centre a small wedge over the whole length separates the two halves, under the wedge provided a brass drain pipe. Removable and replaceable by sliding IN or OUT blood and other fluids flow towards the centre of the table, from where these drip into the drain pipe and carried through an end drain tube to the recepatable after operation the whole top can be washed clean.

Roller Inspection Table, Rotary Head Vice

Motorized Table, Slit Lamp, Mannual Instruments table

Slide Warming Table, Microtome Knife Sharpener, cooling plate

Force Table, Test Tubes Brushes, UNSTEADY STATE HEAT TRANSFER UNIT

Motorized Instrument Table