Slide Warming Table
2,500 Per piece
1 Piece (MOQ)
Medcounty Motorized Table
12,000 - 14,000 Per Piece
1 Piece (MOQ)
Best Deals from Tables
Slide Warming Table
1,800 Per piece
1 Piece (MOQ)
We have engraved a place for ourselves in this industry by manufacturing and supplying a quality range of Slide Warming Table. In laboratories these tables are used to heat slides under constant temperature to provide maximum flattening. Our diligent manpower uses quality approved materials sourced from the most trusted vendors to design the table. We check the Slide Warming Table on finishing and performance parameters before offering at the cost effective price. Features: Highly efficient Suitable to work on 220 V Longer service life Further Details: For heating slides to a uniform temperature just below the melting point of wax to provide maximum flattening without damaging the section. Top plate is mounted on an insulated metal frame. It is fitted with Imported thermostat to control surface temperature from ambient to 70oC. A depression has been provided on the top surface to house a thermometer to indicate the surface temperature. Supplied complete with pilot light, cord and plug, but without thermometer. Suitable to work on 220 V, single phase, 50 Hz, AC supply. Top Plate Size Length: 600 mm Width: 150 mm
Slide Warming Table
Get Price Quote
1 Piece (MOQ)
CAPILLARY TUBE RISING TABLE
Get Price Quote
100 Piece (MOQ)
School Lab Table
15,000 Per piece
10 Piece (MOQ)
Slide Warming Table
Get Price Quote
1 Piece (MOQ)
Thermostatically controlled uniform. temp. from room to 80º C top made of anodized aluminum/steel.
Force Table
Get Price Quote
PR-66 FORCE TABLE To verify the law of composition and resolution of forces consisting of a aluminium table 40 cm in dia. Its raised rim has a engine divided scale, graduated in 360 degree mounted on heavy vertical support rod & tripod base provided with leveling screws. Body under study in a ring center of the table fastened by cords passing over four pulleys attached with the table. Complete with four pulleys, four weights hangers twelve weights hangers twelve weights (2x10 gm, 2x20 gm, 4x50 gm, 4x100gm)
General Surgery Ot Table
318,500 Per Piece
Dimension 1880 mm x 500 mm +10 mm Adjustable Height 790 mm to 1040 mm + 10mm Trendelenburg 30° + 3° Reverse Trendelenburg 30° + 3° Lateral Tilting Position 20° both side + 2° Lifting Position 250 mm + 10mm Flex Position 90° Reflex Position 220° Head Plate 20° up 90° down
Slide Warming Table
Get Price Quote
A versatile equipment to heat slides with just microtomed sections to attain maximum flatness before Staining. Temperature range ambient temperature is thermostatically controlled. The body is made out of thick mild steel duly finished in stoving enamel and top is made of highly polished copper or stainless steel sheet. Complete with thermostatic control knob, indicator lamp, plug & cord etc. to work on 220 V AC 50 Hz single phase.
Grossing Table
Get Price Quote
1 Piece(s) (MOQ)
These surgical pathology work stations are useful for examining surgical specimens. The contaminated air & formalin vapours from work table is sucked out by built-in blowers. Provided with lighting system, swivelled-magnifier, SS Table, Sink & Hot & Cold Mixer Top, Metric Rulers-2 Nos. shelf, drawer and storage compartment ,Towel Ring/Tissue Paper Stand and Waste Bin, Magnetic Tool Bar, Tea Stainer. The working area sides are made from door acrylic material. Widely used, as it is very convenient for "Grossing Work in Histopathology". Fume removal is quiet, efficient and measures less than 65 decibels. Wheel chair accessible design. Installation is quick and easy.
Prism Table
Get Price Quote
To support prisms, glass blocks etc. A 75 mm diameter disc with pillar and supporting clip mounted on a standard 6 mm dia rod.
Vibrating table
Get Price Quote
Vibrating Table : It is designed to carry a load of 140kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrator clamped to imparted by means of off-balance masses rotating on a shalf of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking of the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the frequency to be varied steplessly between a maximum of 3600 vibrations down to 2600 vibration per minute. A speed regulation handle is provided for increasing or decreasing the frequency. A switch is provided for starting the motor. suitable for operation on 440 volts, 3 phase, 50 cycles, A.C.Supply. Note: Vibrating Tables of table top size 75cm x 75cm as well as 100cm x 100cm are also available.
Examination Table
Get Price Quote
Operation And Examination Table Tabular Frame work on 10 cms castors with brakes. This is an exceptionally fine surgical table. With facility of height adjustment by crank mechanism.Offering a very comprehensive range of position viz. "straight", trendlenburg & reverse trendlenburg positions, chair, lithotomy position etc. wout mattress.
Stainless Steel Cabinet Table
Get Price Quote
delivery table
Get Price Quote
Delivery Table Manufacturer, Delivery Table Supplier,Delivery Table Exporter
Motorized Tables
Get Price Quote
We are listed among the leading Motorized Tables Manufacturers, Suppliers and Exporters from Ambala, Haryana. We offer Motorized Tables that are popular in the market for sturdy construction and high performance. Made from corrosion resistant material, our Motorized Tables have carved niche for itself in the market.Why our Motorized Tables Foot Switch enabled up and down movement Ophthalmologic table powered with Et 175 Low Maintenance in terms of unit and power Extra power table directly connected to the instrument Low gravity center for proper stability Optional Accessories Wheelchair accessible tables Tables Stools Slit lamps Lens meters Diagnostic units Used In Medical Centers Hospitals ENT Clinics Health Centers
Labour Table
12,000 - 15,000 Per PCS
10 Piece (MOQ)
Work Table with Undershelf
Get Price Quote
1 Piece (MOQ)
Moment Of Inertia Table
Get Price Quote
1 Piece (MOQ)
To determine the moment of inertia of an irregular body about an axis passing through its center of gravity and perpendicular to its plane by dynamical method. It consists of an aluminum disc of approximately 6” dia with a groove and having three masses in it. It can be suspended by a steel wire provided at the center of a long frame work provided with circular base, which is also fitted with leveling screws.
Slide Warming Table
Get Price Quote
Slide Warming Table
Get Price Quote
For heating slides to a uniform temperature just below the melting point of wax to provide maximum flattening without damaging the section. Top plate is mounted on an insulated metal frame. It is fitted with imported thermostat to control surface temperature from ambient to 70°C. A depression has been provided on the top surface to house a thermometer to indicate the surface temperature. Supplied complete with pilot light, cord and plug, but without thermometer. Suitable to work on 220 V, single phase, 50 Hz, AC supply. Top Plate Sizes in mm:(Length x Width)300 x 250400 x 250450 x 300600 x 450
Food Processing Table
25,000 Per Units
1 Units (MOQ)
Stainless steel Table
Get Price Quote
We have hired quality auditors who keep a strict check on the quality of the raw materials and also check the inputs against varied quality parameters before procuring them. In order to keep transparency in the transactions, we offer an invoice to the clients. This helps in maintaining a reliable bond between organization and clients. Moreover, we offer secure payment procedures. Stainless Steel Table has a sturdy metal body with a polished surface and a long service life.
hydraulic surgical operating table
74,000 Per Piece
Slide Warming Table
Get Price Quote
We are acclaimed as a reputed Manufacturer and Supplier of Slide Warming Table from Haryana, India. We make available these tables in different styles and sizes as per the requirements of our clients. They are made up of high quality material and have long service life. Our Slide Warming Tables have thermostatically controlled uniform temperature and their top is made up of anodized aluminium or stainless steel. Contact us for the most reasonable prices!
Autopsy Table
Get Price Quote
Autopsy table with wheels The tabletop and lower section are made completely of premium grade stainless steel. The tabletop has a thickened outer rim and is sloped in the direction of drainage.
Inertia Table
1,650 Per Piece
1 Piece (MOQ)
Funnel Table
Get Price Quote
Porcelain, Buchner, table type, one piece, with side outlet for vacuum filtration. Glazed inside and out except for rim.
Inertia Table
Get Price Quote
1 Piece (MOQ)