Tablet Compression Machine Dealers in Saha, Ambala

• Brand Name: ALPHA CHEM
• Model Number: ALPHA CHEM-1393

Compression Testing Machine 1000KN : Alpha Chem is manufactures,exporter & suppliers Compression Testing Machine 1000KN. Compression Testing Machine 1000KN : Capacity of the machine is 1000kN. Specimens upto 15cms cubes and 15 cms dia x 30 cms high cylinders can be accommodated. Load measurement is done by a 15 cms dial bourdon tube type hydraulic pressure gauge calibrated in 100 divisions, fitted with a maximum pointer (lag less pointer). The gauge is calibrated against an RTC tested proving ring. The machine is of channel construction, giving excellent lateral rigidity. The hydraulic loading unit is located on the base of the loading machine. The hydraulic jack is precision machined. The piston and cylinder are ground and lapped to fine tolerances. The lower platen can be centrally located on the base, and has concentric grooves for centering the specimen. Spacer is provided to test small specimens. The upper platen is mounted on a swivel arrangement for self aligning action. The pump is fitted integral on the testing machine along with oil reservoir. The hand operated pump is of two speed concentric piston type. Other Capacity : 10 Tons, 25 Tons, 50 Tons, 100 Tons, 150 Tons, 200 Tons Compression Testing Machine (Hand Operated) Four Pillar Type Available Capacity : 10 Tons, 25 Tons, 50 Tons, 100 Tons, 150 Tons, 200 Tons

Compression Testing Machine with control Panel : Alpha Chem is manufactures,exporter & suppliers Compression Testing Machine with control Panel. Compression Testing Machine with control Panel : Electrically Operated Compression Testing Machine CTM which is an electric cum hand operated machine for conducting compression tests on concrete specimens up to 20cm dia and 30 cm in height. The machine caters to the essential applications of various Indian, British & American standards for compression tests. For Compression test on Concrete or similar materials. Suitable for use on Concrete Cubes of any size upto 5cm x 5cm x 5cm, 7.06 x 7.06cm, 10cm x 10cm x 10cm, and 15cm x 15cm x 15cm also on 10 x 20cm and 15 x 30cm high Concrete Cylinders. The load is applied thru hydraulick assembly.The lower platen is on the Hydraulic ram, and upper having a spherical seating is adjustable. The machine is provided with an air release valve and the load is automatically indicated on the 15 cms diam hydraulic pressure calibrated against an N.C.B.M. tested Proving Ring and fitted with a legless max pointer in addition to the live pointer.  This is a hydraulic, electrically operated unit, designed for conducting compression tests on concrete specimens up to 20 cm. Diameter (or width and depth) and 30 cm, in height and also rocks and various other materials. Cold Crushing Strength (CCS) test is also possible. The machine consists of a steel cross head and cast iron base with two pillars connecting the base and cross head by means of nuts. The hydraulic jack is fixed to the base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin.  Loading is accomplished by the upward movement of the with the help of a centering pin. Loading is accomplished by the upward movement of the motorized pumping unit is of plunger type and is connected to the jack by means of a steel connecting tube. A maximum red pointer is provided to facilitate taking of the readings after failure of specimens. The pressure gauges of 20 cm diameter with isolating valves are fixed on the pumping unit at an angle for easy readability.. The machine is fitted with control which enables the rate of application of load to be varied. The machine is equipped with facilities for hand operation as well. The electrical pumping unit is fitted with three micro switches one for each pressure gauge and will switch off the machine automatically as the load on the machine approaches its full capacity of the gauge in case the isolating valves are not operated. This will protect the pressure gauges and the whole unit so that in case of break down of power supply, the machine will stop and will not restart unless the starting switch is operated. The machine satisfies the essential specifications of Indian Standard No. 516-1959. For operation on415 Volts, 3-ph or 230 Volts, 1-ph A.C.

• Application: Compression Testing Machine
• Place of Origin: IN-India
• Supply Ability: 2000 Piece/Pieces per Month
• Lead Time: 30days
• Port: NEW DELHI
• Model Number: RAJAS ENTERPRISES (INDIA)

our ect machines delivers pulsed, bi-directional square wave stimulus. The current is constant at 0. 9 ampere and the voltage varies automatically by a built in microcomputer as per the impedance of the patient. We conceived and designed the rajas keeping three major considerations in mind i. E. Its stimulus parameters had to be chosen on the basis of research data. (maxwell 1968, weaver teal 1977 wiener 1980). It should have the capacity to produce seizure virtually 100%. It should be safe and easy to operate. Parameters display on lcd. Auto stimulus voltage. Auto impedance check. Output display in joules as well as in milli coulombs. In built rechargeable battery with charger.  

Our ECT Machines delivers pulsed, bi-directional square wave stimulus. The current is constant at 0. 9 ampere and the voltage varies automatically by a built in microcomputer as per the impedance of the patient. We conceived and designed the rajas keeping three major considerations in mind i. E. Its stimulus parameters had to be chosen on the basis of research data. (Maxwell 1968, weaver teal 1977 wiener 1980). It should have the capacity to produce seizure virtually 100%. It should be safe and easy to operate. Parameters display on LCD. Auto stimulus voltage. Auto impedance check. Output display in joules as well as in milli coulombs. In built rechargeable battery with charger.