Test Rig Dealers in Punjabi Mohalla, Ambala

• Fuild mechanics and machinary equipment: Francis Turbine Test Rig
• Fuild mechanics and machinary equipment: Centrifugal Pump Test Rig
• Fuild mechanics and machinary equipment: Hydraulic Ram Test Rig
• Fuild mechanics and machinary equipment: Submersible Pump Test Rig

Product description:our organization is regarded among the authentic manufacturers and exporters of optimum quality kaplan turbine test rig. Highly acknowledged for its corrosion resistance, shock proof body construction and hassle-free operation, offered equipment is extensively demanded among our huge client base. description: â�¢ kaplan turbine is an axial flow reaction turbine named in honour of dr. B. Kaplan, a german engineer. Â�¢ this turbine is suitable for low head. The power produced by a turbine is proportional to qh. As the head (h) decreases the discharge (q) must increase to produce the same power. Â�¢ the present set-up consists of a scroll casing housing a runner. Â�¢ water enters the turbine through the stationary guide vanes and passes through the runner axially. Â�¢ the runner has a hub and airfoil vanes,which are mounted on it . The water is fed to the turbine by means of centrifugal pump. Â�¢ the runner is directly mounted on one end of a central shaft and other end is connected to a brake arrangement. Â�¢ a transparent hollow cylinder made of acrylic is fitted in between the draught tube and the casing for observation of flow on to the airfoil vanes. Â�¢ this runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of drum brake arrangement so that the efficiency of the turbine can be calculated. Â�¢ the set-up is supplied with control panel. Â�¢ pressure and vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.

he present Jet Pump Test Rig is a self-contained unit operated on closed circuit basis containing

• Voltage: 110V, 380V
• Condition: New
• Application: Industrial Use
• Power: 1-3kw, 5-7kw
• Driven Type: Electric
• Motor Power: 10hp, 4hp, 8hp

The unit of Ice Plant Test Rig consists of a hermetically sealed compressor with air cooled condenser. A capillary is provided next to the condensers followed by medium temperature evaporators. Electrical energy supplied to the compressor can be measured by energy meter. The evaporator is immersed in the SS tank with PUF insulation. The equipment is mounted on a MS Powder Coated base plate with control panel. ExperimentTo calculate the co-efficient of performance of unit Technical SpecificationsCompressor : Tecumseh India Hermetically sealed compressor shall be provided with its standardized electrical accessoriesCondenser : Fins and Tube type air cooled condenserCondenser Fan Motor : Best Indian makeCabinet : The Inner and Outer brink tank shall be fabricated out of Stainless Steel SheetCooling Coil : Water Immersed Type.ICE Cans : G.I. Sheets Ice CansRefrigerant-Freon : 404a Refrigerant GasMeasuring ControlGlass Tube Rotameter to measure the flow liquid refrigerant gas Freon � 404asuction pressure gauge for low pressure measurementDischarge pressure gauge for high pressure measurementDrier, Gas charging valve, Expansions devices � Capillary tube typeElectrical Control Panel : MCB, Voltmeter Digital type, Amp. Meter Digital type, Energy Meter for Compressor input, Switches & Indication LightsDigital Temperature : 1 Nos. Digital Temperature Indicator provided Indicator with Temperature Sensor.Electrical Characteristic : Current AC Single Phase, 50 Hz 220 Volts.Manual : Operation and maintenances manual should be provided along with the supplied equipment.

• Type: Domestic
• Application: Laboratory Use
• Driven Type: Electric
• Power supply: 220V - 50 Hz single phase
• Compressor: Double Cylinder Drive and Belt-pulley
• Refrigerant: R-134a

All components and instrumentation will be mounted on a Mild Steel Sheet panel  9 Chanel  digital indicator with voltmeter and ammeter -  will allow measurement of motor power or evaporation Transformer with dimmer -  will change the load of the evaporator Float flow meter -  for the flow of the refrigerant and for the flow "of water Bourdon type pressure gauge  -  for the refrigerant pressure at the evaporator and for the condenser Dynamometer and tachometer  -  for measuring the mechanical power of the engine Expansion valve  -  thermostatic Type An evaporator -  equipped with electric resistances.A condenser cooled by water. Safety -  condensing pressure and evaporation temperature protected by automatic disconnector. The Ensemble will be grounded. Differential circuit breaker.

Refrigeration test rig description:- this unit consists of a hermetically sealed compressor with air cooled condenser. A capillary or expansion valves are next to condensers followed by medium temperature evaporators. Electrical energy supplied to the compressor can be measured by energy meter. This test rig is used to perform the following experiments. Experiments:-  to determine cop of unit. Technical specification: - compressor : isi kirloskar tecemshah hermetically sealed compressor capacity. Compressor capacity : ½ hp condenser : suitable for above compressor with suitable cooling fan & fins and copper tube air cooled. Expansion device : capillary tube & filter drier pressure gauge : 2 nos. For high and low pressure. Service valves : 4 nos. Hand set valve evaporator coil : suitable for above compressor immersed in water tank. Refrigerant : freon – 12 134a rotameter : suitable for compressor capacity glass tube rotameter to measure the flow of liquid refrigerant gas. Control panel : comprising of :- 1. main switch 2. voltmeter digital type – 1 nos. 3. amp. Meter digital type – 1 nos. 4. energy meter for compressor input. 5. switches indication lights etc. 6. digital temperature indicator: 5 nos. 7. temperature sensor (thermocouple) : 5 nos. Voltage : single phase 220 volts 50hz. Ac supply manual : operation and maintenances manual should be provided along with the supplied equipment. The equipment is mounted on a sturdy frame with control panel.

We are engaged in manufacturing and supplying Air Conditioning Test Rig from Ambala, Haryana. Our Test Rig is widely preferred across the country to accurately measure the cooling capacity of the air conditioner. Customers can obtain Air Conditioning Test Rig in retail or bulk orders from us at most economical rates. Used for : To demonstrate fundamental compression cycle. To find the C.O.P. & cooling capacity To study the effect of heating, cooling, humidification& dehumidification for conditioning of air To study basic component of Air Conditioning systems. To study variation of capacity of the unit with different capillaries To study PH and psychometric chart   Details : To study the By Pass Factor of a cooling coil : Technical Specifications of the Equipment. Compressor :- ISI hermetically sealed compressor (1.5 Ton capacity). Condenser :- Fins and copper tube type Air Cooled condenser of capacity 1 H.P. has been provided in the unit. Condenser Fan motor :- One no forced draft fan motor of suitable capacity along with suitable capacity of fan blade has been provided to draft the air of condenser. Receiver :-  One no heavy duty sheet type receives along with valve fittings has been provided to store the liquid refrigerant to R-22 gas. Rotameter :- To measure the flow rate of R-22 in unit. Evaporator :- A air cooled evaporator is provided. Supply Duct :- A metallic supply duct is fitted containing DBT/WBT sensing probe and supply of steam for humidification. Boiler :- Boiler is fitted to standy to supply steam the effect of humidification. Heating Coil :- Heating coil is fitted inside the duct to study the process of heating. Control Panel Board :- The following controls have been provided on dull sunmica board. Main Switch, Voltmeter, Amp. Meter, Energy meter, Indication lights, Digital Temp Indicator, Suction gauge, Discharge gauge, LP/HP cut out, Expansion valve, capillary tube, Solenoid value, Filter dryer, Thermostat liquid line indicator. Base :- Heavy duty angle iron base has been provided in the unit to accommodate the condensing unit, sunmica board supply dull A/C body.

• Brand: Superb Technologies
• Material: Stainless steel
• Application: Laboratory equipment
• Voltage: 220V AC
• Phase: Single Phase
• Model Number: SHD-38
• Automation Grade: Semi-Automatic
• Power Source: Electric
• Frequency: 50 Hz
• Current: 5-15 amp
• Sump Tank Capacity: 120 Ltrs
• Floor Area Required: 1.5 x 0.75 m

• Motor: 3 hp, 3 Phase 415 V AC.
• temperature: 0-199.9 °C

Air Compressor Test Rig The test rig consists of a reciprocating air compressor driven by an electric motor. The compressor is two stage compressor with intercooler. Intake air flow rate is measured by using an air box with orifice plate & differential manometer. Pressure gauges are provided to measure pressure after 1st stage, 2nd stage & tank pressure. Temperature sensors are used to measure the air temperature at Inlet, after 1st Stage, Intercooler & 2nd stage. Compressor Speed & Power Consumption are displayed on panel meters mounted at the front. In order to study compressor performance at different speeds Variable Speed Motor with VFD can also be supplied on request. Experimental Capabilities: To investigate performance of Reciprocating Air Compressor. To study effect of delivery pressure on Power Consumption & Compressor Efficiency. To determine mechanical efficiency of reciprocating compressor. To determine Free Air Delivery (FAD) for Air Compressor.

• Capacity: 1/3 Ton
• Evaporator: Made of Stainless Steel,Insulated with ceramic wool/P.U.F.
• Expansion Device: Capillary Tube,Compatible Capacity.
• Electric Supply: 5A-220 V,AC
• Floor area: 1.5 m x 1 m
• Compressor: Hermitically sealed compressor.
• Agitator: Compatible capacity.
• Rotameter: Range 6 to 60 LPH
• Digital Voltmeter: 0-300 V
• Pressure Gauges: 2 Nos. Safety Control overload and over current protectors for compressor and Time delay circuit.
• Temperature Sensor: RTD PT-100 Type.
• Condenser: Air cooled compatible to 1/3 Ton compressor
• Condenser Cooling fan: Compatible capacity with permanent lubricated motor.

Two Stage Air Compressor Test Rig consists of a double stage reciprocating type air compressor driven by a motor through a belt. The outlet of the air compressor is connected to reservoir tank and suction is connected to another air tank with a orifice plate and a water manometer. Bellow is fitted on one side of the air tank to regulate the flow. Temperature of inlet air, after single compression, inlet and outlet of second compression and pressure in reservoir and at intermediate stage can be measured by Temp. Sensors and gauges

To, visualise the operation and estimate B. H. P. & W. H. P. and various efficiencies of pelton turbine. Pelton wheel connected to a rope brake. Water supplied by centrifugal pump & flow measured by venturimenter & mercury manometer. Water jet is directed over the buckets by a nozzle & a spare operating inside the nozzle controls the water flow.

HYDRAULIC RAM TEST SETUP DESCRIPTION:- The Set-up is designed to study the Hydraulic Ram. Hydraulic RAM is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “When flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. The Set-up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure and Vacuum Gauge are connected on delivery and suction side for the purpose of measurement. EXPERIMENT:- Ø To find out discharge of useful water and waste water. Ø To find out the efficiency of the Hydraulic RAM FEATURES:- Ø Closed loop water circulation Ø Compact & stand alone set-up Ø MS Excel sample calculation program on demand Ø Stainless Steel tanks and wetted parts Ø Superb painted structure Ø Simple to Operate & Maintain UTILITIES REQUIRED:- Electric Supply: - Provide 230 +- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC) 5 A, three pin socket with switch for pump. Water Supply: Tap water connection ½ “ BSP Distilled water @ 90 Ltrs. (Optional) TECHNICAL SPECIFICATIONS: - Ø Product : Hydraulic RAM Ø RAM : Size 50 x 15 mm, Supply Head 2.5m, Delivery Head 10 m (max.)

• Material: Mild Steel
• Application: Laboratory
• Voltage: 220-240V
• Automation Grade: Semi-Automatic
• Pump Capacity: 1 HP
• Vacuum Gauge: 0 to -760 mm of Hg

Our company is placed among the foremost manufacturer, exporter and supplier of the multi stage air compressor test rig. Our team of our deft experts manufacture this rig by using excellent quality components with the improvisation of contemporary techniques with set industry norms. The rig provided by us is basically used to test the air compression in multiple stages. In addition, the offered multi stage air compressor test rig is rigorously tested by our quality experts on predefined quality parameters to deliver a flawless range towards the client's end. Features: superior strength fine finish durable performance accurate measurement specification: a. Motor : 5 h.p., with torque measurement b. Compressor : 2 cylinder c. Pressure : 10 kgcm2 d. Flow measurement : orifice meter accessories: control panel consists of starter, energy meter, pressure gauge (2 nos.).

• Voltage: 220 V
• Brand: Ether
• Material: Stainless Steel
• Power Source: Electric
• Item Code: 1598

The present set-up consists of a runner. The water is fed to the turbine by Means of Centrifugal Pump, radially to the runner. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the tu ine casing is provided with a transparent acrylic sheet for observation of flow on to the runner. Load is applied to the turbine with the help of brake arrangement so that the efficiency of the turbine can be calculated. A draft tube is fitted on the outlet of the turbine. The set-up is complete with guide mechanism. Pressure and Vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.

Code: EEZ0008 Air Water Heat Pump Test Rig. Air Water Heat Pump Test Rig ManufacturerExperiment:    To watch the working foremost of warmth pump cycle.    To decide Precise cooling C.O.P, Carnot C.O.P., Theoretical C.O.P., Precise heating C.O.P., Relative C.O.P., Ton of Refrigeration And so on.    To decide the effectivity of the warmth pump device.    Study the working of refrigeration cycle additionally.Experimental Setup :    Compressor : ½ Tone, Hermetically sealed compressor, Make Emmelsion – Coplend/identical.    Condenser : Coiled Tube Warmth Exchanger acts as a condenser. Copper coil is merged in water tank to chill down the fuel temp. Steady water drift circulation is required to extract the warmth of gases.    Growth software : Thermostatic enlargement valve.    Evaporator coil : Air Cooled evaporator constituted of copper pipe & Aluminum fins of matching capability with fan.    Rotameter : For measuring liquid waft of Refrigerant    Power Meter : For energy size of compressor.    Power Gauge : 2 Nos. for H.P., L.P. size    HP/LP cutout : 1 No. to swimsuit compressor.    Provider valve needle sort : 1 No.    Thermostat : 1 No.    Appropriate filterPanel :    12 Channel Digital Temperature Indicator    Dimmerstat : 230 V. AC single segment for heating keep watch over    Primary On/Off Swap.    Voltmeter : zero – 250 V.    Ammeter : zero – 15 A.

• Voltage: 230
• Automation Grade: Automatic
• Power Supply: AC
• Phase: Single
• Compressor Type: Hermeticaly Sealed
• Condenser Type: Air Cooled
• Space Required: 2 m x 1 m
• Evaporator Type: Electric
• I Deal In: New Only

• Speed: 1000rpm
• Output power: 1 kw.

Pelton wheel turbine is only impulse water tubine now in common use named in honour of Sir L.A Pelton (1829-1908) of Califonia, USA. It is a tangential flow impulse turbine.the water strikes the buckets along the tangent of the runner.The energy available at the inlet of the turbine is only kinetic energy.The pressure at the outlet of the Turbine is atmospheric this turbine is used for high heads. The present set-up consist of a runner.The buskets are mounted on the runner. The water is fed to the turbine, though SS nozzle with a SS spear, by means of Centrifugal Pump,tangentially to the runner. Flow of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel. The runner is directly mounted on one end of a central SS shaft & other end is connected to a braek arrangement. The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS structure.Load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure gauge is fitted at the inlet of the turbine to measure the total supply head to the turbine.

IC engines are widely used in automobile, domestic and industrial sector. They are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an IC engine. It consists of an IC Engine, dynamometer, fuel measuring, air intake measuring and various other arrangements.

• Type: Centrifugal Pump Test Rigs
• Voltage: 230 V
• Condition: New
• Application: Industrial Use
• Driven Type: Electric
• Motor Power: 0-10 Hp
• Automation Grade: Automatic

• Brand Name: Scientico
• Material: Stainless Steel
• Voltage: 230 V
• Automation Grade: Automatic
• Phase: Single Phase
• Current: 5-10 Amp
• Current Type: AC

Offered engine is manufactured with utmost perfection by making use of optimum quality components and contemporary technology in tune with set market norms.

Centrifugal Pump Test Rig, Floating Carriage Diameter Micrometer

Bend Meter Test Rig, 5.0 Megapixel Research Microscope Camera

1 Cylinder 4 Stroke Petrol Engine Test Rig, Student Spectrometer

Steam Turbine Test Rig, Beam Apparatus, UNSTEADY STATE HEAT TRANSFER UNIT

Reciprocating Pump Test Rig, Cam Analysis Apparatus, car ignition system