Testing Apparatus Dealers in Saha, Ambala

Unconfined Compression Test Apparatus (Spring Type Autographic) : Alpha Chem is manufactures,exporter & suppliers Unconfined Compression Test. Spring type unconfined compression testing apparatus can be used either in a laboratory or in field. SPECIFICATION : Consists of a spring operated load frame with arrangements for loading 38mm x 76mm samples, one set of four load springs of stiffness 0.2kg 0.4kg. 0.8kg and 1.6kg/mm, a calibrated mask and one set of 50charts, in a metal carrying case. SPARES & ACCESSORIES: Chart set of 50 Calibrated mask Spring set comprising one each of stiffness 2n/mm, 8 n/mm and 16 n/mm Coning tool for 38mm sample, (female) Coning tool for 38mm sample, (male) Tripods stand wooden, for using the instrument in field.

Alpha Chem is manufactures,exporter & suppliers Field Density Test Apparatus. Field Density Test Apparatus  : Three sizes Available. * 10cm (Small Size) * 15cm (Medium Size) * 20cm (Large Size) 10cm (Small Size) :- Sand Replacement Method. Consists of Sand Pouring Cylinder, one calibrating container 10 cm dia & a square tray of 30 cm x 30 cm with a central hole of 10 cm diameter.

Digital timer with 1-second resolution Accurate time out provided by microprocessor-based time totalizer Baskets move Up & Down as per IP/USP test specifications Temperature Controlled by sensitive thermostats Digital Tablet Disintegration Apparatus is designed for accurate estimation of disintegration time of tablets as per IP/USP standards. The instrument is designed to test batches of six tablets, simultaneously. The unit consists of two beakers having a capacity of 1000 cc each. In these beakers, suitable disintegration media can be taken. These can be temperature controlled using an in-built heater and a high thermostat fitted inside the instrument. A microprocessor-based time totalizer is provided for accurate time readout.

We provide a premium quality Tablet Disintegration Test Machine to our clients. The Tablet Disintegration Test Machine, we manufacture, is a test equipment work on UP and DOWN movement of Tablet in Medium of water kept 37 degree C. Our Tablet Disintegration Test Machine is built on a steel cabinet, which housed a geared motor for the vertical shaft drive the shaft moves up and down. On the upper end of the shaft fitted a horizontal strip with clamp on either side. These clamps hold glass vessels open at both ends and with stainless steel wire gauge with rubber rings at the lower end, which dips in water. Specifications Two independently thermostatically controlled hot plate rating 65 watt are fixed on the top of the cabinet upon which beaker 1000 ml size are net filled with waterThe temperature of Tablet Disintegration Test Machine is maintained at 37 degree C with and accuracy of 1 Degree CIndependent switches with neon indicators for motor hot plate are fitted on a panelMains fues with Digital Temperature meter and plug provided. Work on 220 Volt AC mains

We offer leak test apparatus (gmp model) small desicator with 6” (150mm) diameter designed and applicable in airproof test of blister pack, strip, foodstuff, pharmaceuticals, dairy and other industries for leak test. * compact gmp model. * diaphragm type vacuum pump. * polycarbonate vacuum desiccators. * vacuum level upto 20" of hg.

The apparatus consists of 4 parts. A water bath with 500 watt heater covered 1000 mI. vessel made from Borosil glass and digital temperature control. Variable speed motor, with 30cms longs stainless steel shaft. A cylindrical stainless steel basket and a membrane fixing attachment, water bath is made of imported thick Acrylic sheet with transparent cover at top. Temperature of the bath is maintained at 37°C with an accuracy of ±1° C.A cylindrical glass vessel of 1000 ml. capacity with slightly concave bottom has a flenged edge at the top to accept a fitted cover having four holes. One hole placed in the centre. The shaft of the motor is fitted on an up right and has an electronic speed regulating device that allows the speed to be varied from 25 to 250 R.P.M. The shaft is 6 mm dia. 30 cms on with basket fitted at end rotates smoothly and without any significant wobble. The basket consist of two parts one of which is attached to the shaft. It is of solid metal except for 2 mm vent and is screwed on the main shaft.Lower part of the basket is held with this part by means of threading and this allows proper removal of lower part for introduction of the test samples. The detachable part of the basket is fabricated of stainless steel mesh formed into cylinder of size 36 mm x 25 mm dia. The equipment is workable on 220 volts 50 C/S A.C. but analog type double,three & Six Stage.

Disintegration test apparatus i.p.[2615] standard, usp and b.p. Standard. The test equipment works on up and down movement of tablets in medium of water kept at 37 degree c. Built on a steel cabinet of size 14" x 12" x 8" which houses a geared motor for the vertical shaft drive, the shaft moves up and down by 7.6 cms. At a speed of 30 rounds per minute. On the upper end of the shaft is fitted a horizontal strip with clamps on either side which holds glass vessels open at both ends and stainless steel wire gauge fixed with rubber ring at the lower end which dips in water. Two independentally thermostatically controlled hot plate (rating 65 watt) are fixed on the top of the cabinet upon which beakers of 1000 ml. Size are kept filled with water. Temperature is maintained at 37 degree c with an accuracy of 1 degree c. Independent switches with neon indicators for motor and hot plates are fixed on a panel. Main fuse with 2 meter main cord and plug are provided. Works on 220 volts 50 c/s ac.

• Cement and concrete testing lab: Concrete Test Hammer
• Cement and concrete testing lab: Curing Tank
• Cement and concrete testing lab: Flow Table IS:6932 - Hand Operated

Used to check and maintain the slope of the road as per design. Material:- aluminium section of size 24 mm x 45 mm of thick gauge. Size: 3 meters long

It is designed to determine the swelling pressure developed by soil specimens moulded to desired densities at known moisture contents, when soaked in water.   The load applied to restrain the swelling is transferred to a load measuring proving ring through a perforated swell plate and a load transtor bar. The proving ring is attached to the lead screw of load frame, hand operated designed for the purpose. The load frame has a worm and gear arrangement for initial setting and for subsequent volume change compensation. A soaking tank is provided for saturating the specimen and base of the mould has channeis and radial grooves with connecting holes.

Fitted with D.C. MOTOR But to work on 220 Volts A.C. with Variable Speed from 20 R.P.M. to 100 R.P.M. approx. Jar. Test Apparatus allows efficient and economical flocculation matter and collides in general and also has been specially designed for use in water treatments to correctly estimate the dosing of alum and such other coagulants for treatment of Water sewage and floc formation test in Water Treatment plants.

• Material: Stainless Steel
• Rod Length: 600 mm
• Rod Diameter: 16mm
• Tamping Rod: 0-60cms
• Tube Height: 300mm

Schering Bridge, Heat Cylinders Set, Voltmeter, Bi- Prism Assembly

Industrial Air Curtain, Scientific Binocular Microscope