Testing Machines Dealers in Saha, Ambala

 Alpha Chem is manufactures,exporter & suppliers Automatic Compression Testing Machine. Automatic Compression Testing Machine : Automatic range of 1500kN, 2000kN and 3000kN capacity compression testing machines have been designed to meet the need for reliable and consistent testing of concrete samples. All machines feature the complete automatic test cycle with a closed loop digital readout. Once the specimen parameters have been introduced, it is sufficient to press the START button to complete the test. Compression machines consist of three main parts: Frame, power pack and data acquisition & control system. Each part has been designed to manufacture machines with a high degree of mechanical stability and complies to EN 12390-4; BS 1881 and ASTM C39 (with suitable platen set) standards. Automatic test cycle with standard Rapid Approach Graphical - LCD Data Acquisition and Control System Menu Driven Software for easy operation Load vs time plot and instantaneous load rate displayed Accurate load rate control within ±5 from 1 kN/sec to 20 kN /sec Class 1 starting from 10% of the full range Ready Stress Calculation for the standards of EN 12390-3, EN 12390-5, EN 12390-6, EN1338, EN1340, EN 196 SI, Metric, Imperial Units Data storage up to 256 tests RS 232 output for printer or PC Free of charge PC software for test control and advanced report printout Frame The frame is welded steel fabrication carrying the ball-seated 300 mm diameter upper platen which complies to EN 12390-4. Located on the loading ram which is protected from debris by a cover, the lower platen is marked for the centering of cube and cylinder specimens. The dimensions of the frame allow the testing of concrete cylinders up to 320 mm long x 160 mm diameter; 100, 150 mm and 200 mm cubes. All machines are supplied complete with 30 mm, 40mm, 50mm and 90 mm distance pieces. To test samples shorter than 150 mm extra distance pieces should be ordered. All machines are supplied with flexi-glass front and rear removable safety doors. All frames have a single acting up stroking ram with over travel protection to stop the motor when the maximum platen travel is reached. Power Pack The dual stage power pack which is designed to supply the required oil to the frames. Very silent power pack can load a specimen between 1 kN/sec to 20 kN/sec. A high delivery low pressure pump is used for rapid approach and a low delivery high pressure radial piston pump is used for test execution. On all power packs maximum pressure valve is used to avoid machine overloading. The main characteristics are: Dual stage pump 750 W power 25 litre oil capacity 60-100 mm/min fast approach speed Special Feature : 600kN,1500kN, 2000kN & 3000kN High stability welded assembly 50mm piston stroke with safety switch Platen hardness of min 55 HRC Distance pieces and safety door included

• Brand Name: ALPHA CHEM
• Model Number: ALPHA CHEM-1392

Compression Testing Machine Hand Operated : Alpha Chem is manufactures,exporter & suppliers Compression Testing Machine Hand Operated. Compression Testing Machine Hand Operated : It is particularly useful where constant and consistent Electric power is not available. The load is applied manually and observed on a Pressure gauge. The Pressure Gauge has maximum load indicator which stand still even after the specimen under test crushes and has to be set to zero manually. High Stability Self-aligning platen assembly. Gauges are calibrated in Kilo Newton against certified Proving Ring. Suitable for testing cubes of various sizes Using special platens, bricks also can be tested. Hard chrome plated piston with new type of long life oil seal. Four Pillar Model - superior in design, reliability and accuracy Practically no welded parts, all joints reinforced with heavy nut/bolt to withstand occasional over loading and to ensure center loading. Rounded Corners – add to elegance and safeguard against injury Hardened and grinded platens with guide lines for placing sample for Testing Spare Oil Seal Brick Testing Attachment Hydraulic Oil (Tin of 5 Liters)

• Weight: 120KG
• Color: WHITE AND BLUE
• Voltage: 230 V
• Country of Origin: Made in India
• Material: Mild Steel
• Power: AC
• Usage/Application: CIVIL LAB EQUIPMENT
• Phase: THREE PHASE
• Frequency: 50HZ
• Item Code: 641015

• Thickness: 2-5 Mm
• Color: Customize
• Feature: Durable
• Size: 5ml 10ml 25ml
• Condition: New
• Power: Electric
• Capacity: 5-50 ml

Having a definite quality management system, we are regarded as the noteworthy firm, engaged in offering quality assured gamut of Test Tube Making Machine.   Use : Making test tubes of different sizes   Features: Trouble free performance Robust design Easy maintenance

We provide a premium quality Tablet Disintegration Test Machine to our clients. The Tablet Disintegration Test Machine, we manufacture, is a test equipment work on UP and DOWN movement of Tablet in Medium of water kept 37 degree C. Our Tablet Disintegration Test Machine is built on a steel cabinet, which housed a geared motor for the vertical shaft drive the shaft moves up and down. On the upper end of the shaft fitted a horizontal strip with clamp on either side. These clamps hold glass vessels open at both ends and with stainless steel wire gauge with rubber rings at the lower end, which dips in water. Specifications Two independently thermostatically controlled hot plate rating 65 watt are fixed on the top of the cabinet upon which beaker 1000 ml size are net filled with waterThe temperature of Tablet Disintegration Test Machine is maintained at 37 degree C with and accuracy of 1 Degree CIndependent switches with neon indicators for motor hot plate are fitted on a panelMains fues with Digital Temperature meter and plug provided. Work on 220 Volt AC mains

BIS-1237, 1706. The tile sample is pressed under a specified load against a grinding path, strewn evenly with an abrasive powder revolving at the rate of 30 ± 1 revolutions per minute. The wear of the tile is measured using a thickness gauge. The abrasion machine consists of a replaceable grinding path fitted on a disc rotating about its vertical axis. The rotating disc and the grinding path are enclosed by a circular tray. A bracket holds the specimen. The loading is by a counter balanced lever. A funnel is provided to facilitate charging the grinding path with abrasive powder. Supplied complete with automatic pre-set revolution counter and one 7.5 kg. weight but without abrasive powder and thickness gauge. Suitable for operation on 415 Volts, 50 Cycles, 3 Phase A.C. supply.

• Cement and concrete testing lab: Flow Table IS:6932 - Hand Operated
• Cement and concrete testing lab: Concrete Permeability Apparatus - Single Cell

It is used for testing 40mm x 40mm x 160mm mortar specimens for flexural strength. (rilem cembureau test) by single point loading. Salient features specifications : it is a motorized, mechanical unit. The speed is adjusted so that the load increase on the specimen is between 4 to 6 kgsec. A flexure test attachment for keeping the specimen in position is also supplied. This consists of two rollers 10mm. Diameter and spaced 100mm apart, and a third roller of the same diameter equidistant from the first two and for transmitting the applied load to the opposite face of the prism. The unit is for operation on 230 volts, single phase, 50 cycles a.c.supply. Loads are measured on a proving ring fitted with a sensitive dial gauge. Supplied without proving ring. accessories: proving ring, capacity 500 kn.

Our ECT Machines delivers pulsed, bi-directional square wave stimulus. The current is constant at 0. 9 ampere and the voltage varies automatically by a built in microcomputer as per the impedance of the patient. We conceived and designed the rajas keeping three major considerations in mind i. E. Its stimulus parameters had to be chosen on the basis of research data. (Maxwell 1968, weaver teal 1977 wiener 1980). It should have the capacity to produce seizure virtually 100%. It should be safe and easy to operate. Parameters display on LCD. Auto stimulus voltage. Auto impedance check. Output display in joules as well as in milli coulombs. In built rechargeable battery with charger.

• Application: Compression Testing Machine
• Place of Origin: IN-India
• Supply Ability: 2000 Piece/Pieces per Month
• Lead Time: 30days
• Port: NEW DELHI
• Model Number: RAJAS ENTERPRISES (INDIA)

our ect machines delivers pulsed, bi-directional square wave stimulus. The current is constant at 0. 9 ampere and the voltage varies automatically by a built in microcomputer as per the impedance of the patient. We conceived and designed the rajas keeping three major considerations in mind i. E. Its stimulus parameters had to be chosen on the basis of research data. (maxwell 1968, weaver teal 1977 wiener 1980). It should have the capacity to produce seizure virtually 100%. It should be safe and easy to operate. Parameters display on lcd. Auto stimulus voltage. Auto impedance check. Output display in joules as well as in milli coulombs. In built rechargeable battery with charger.