Testing Machines Dealers in Ambala

 Alpha Chem is manufactures,exporter & suppliers Automatic Compression Testing Machine. Automatic Compression Testing Machine : Automatic range of 1500kN, 2000kN and 3000kN capacity compression testing machines have been designed to meet the need for reliable and consistent testing of concrete samples. All machines feature the complete automatic test cycle with a closed loop digital readout. Once the specimen parameters have been introduced, it is sufficient to press the START button to complete the test. Compression machines consist of three main parts: Frame, power pack and data acquisition & control system. Each part has been designed to manufacture machines with a high degree of mechanical stability and complies to EN 12390-4; BS 1881 and ASTM C39 (with suitable platen set) standards. Automatic test cycle with standard Rapid Approach Graphical - LCD Data Acquisition and Control System Menu Driven Software for easy operation Load vs time plot and instantaneous load rate displayed Accurate load rate control within ±5 from 1 kN/sec to 20 kN /sec Class 1 starting from 10% of the full range Ready Stress Calculation for the standards of EN 12390-3, EN 12390-5, EN 12390-6, EN1338, EN1340, EN 196 SI, Metric, Imperial Units Data storage up to 256 tests RS 232 output for printer or PC Free of charge PC software for test control and advanced report printout Frame The frame is welded steel fabrication carrying the ball-seated 300 mm diameter upper platen which complies to EN 12390-4. Located on the loading ram which is protected from debris by a cover, the lower platen is marked for the centering of cube and cylinder specimens. The dimensions of the frame allow the testing of concrete cylinders up to 320 mm long x 160 mm diameter; 100, 150 mm and 200 mm cubes. All machines are supplied complete with 30 mm, 40mm, 50mm and 90 mm distance pieces. To test samples shorter than 150 mm extra distance pieces should be ordered. All machines are supplied with flexi-glass front and rear removable safety doors. All frames have a single acting up stroking ram with over travel protection to stop the motor when the maximum platen travel is reached. Power Pack The dual stage power pack which is designed to supply the required oil to the frames. Very silent power pack can load a specimen between 1 kN/sec to 20 kN/sec. A high delivery low pressure pump is used for rapid approach and a low delivery high pressure radial piston pump is used for test execution. On all power packs maximum pressure valve is used to avoid machine overloading. The main characteristics are: Dual stage pump 750 W power 25 litre oil capacity 60-100 mm/min fast approach speed Special Feature : 600kN,1500kN, 2000kN & 3000kN High stability welded assembly 50mm piston stroke with safety switch Platen hardness of min 55 HRC Distance pieces and safety door included

PRODUCT DETAILS Cowbell Fatomatic Machine 1. Easy to setup, operate and clean 2. Proven measurement principle 3. Auto-zero facility 4. Big, bright LED display 5. Dual display: opposite sides * 6. Single curve cailbration 7. Inbuilt battery charger 8. Compatible with most coumputers 9. Automatic mains-battery (AC-DC) changeover 10. Special carry bag: makes storage safe and carrying the machine convenient* 11. Handles wide range of voltage (fluctuations also) 12. Maintenance - easy and minimum 13.In-house manufacture 14. Prompt service.

• Certification: CE Certified, ISO 9001:2008
• Application: Testing Material
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg, 500-600kg
• Color: Black, Blue, Brown, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric
• Warranty: 1year, 2years, 5years

• Capacity: 2500 Kgf or 25000N
• Model Name/Number: TT-2521D
• Material: Mild Steel
• Brand: Maxwell
• Display Type: Digital
• Phase: 1 Phase

• Brand Name: ALPHA CHEM
• Model Number: ALPHA CHEM-1366

Flexure Testing Machine : Alpha Chem is manufactures,exporter & suppliers Flexure Testing Machine. Flexure Testing Machine : The Flexure Strength Testing are designed to test flexural strength of concrete beams. The design provide maximum rigidity throughout their working range. The load is applied by the downward movement of the piston. A spacer is for testing different size of beams. The load is indicated on a calibrated bourdon tube type load gauge of range: 0 - 100 kN x 0.5 kN (0- 1O,000 kgf x 50 kgf). The load gauge is calibrated against National Council for Cement and Building Materials Certified Proving Ring. Flexure Testing Machines 1. Light weight, rugged high strength frame 2. Double action hydraulic pump 3. Self-aligning roller assembly 4. Hydraulic jack provided with retraction spring 5. For testing beams of 100 x 100 x 500mm and 150 x 150 x 700mm 6. Conforms to IS 516, BS 1881 and ASTM C 78 Two Models are available

• Material: Stainless Steel
• Power: 230 V
• Display Type: Digital
• Temperature (deg. Celsius): 30.0 C to 40.0 C
• Wavelength Range: 220-660 Nm
• Power Source: Electric

We are the prominent manufacturer of gear testing machine of superior quality. Gear testing machine is engineered with the use of modern technology. Gear testing machine is in high demand among our esteemed clients due to its high quality.

• Material: Mild steel
• Voltage: 220 V
• Color: White & blue
• Automation Grade: Semi Automatic
• Model Number: STC-31
• Brand: SUPERB TECHNOLOGIES
•  :  

‘vaiseshika’ brinell hardness testing machines, type: bht 7005-up are highly reliable, accurate and durable hardness testing machines. These machines are used for determining the hardness of ferrous and non-ferrous metals with high reliability and accuracy. Vaiseshika brinell testers are available in three models i.e. Ultra precision, precision and electronic. 

Hardness Testing Machine that we make available is acclaimed for its trouble-free performance, longer functional life, reliable results and low maintenance cost. Compliant with the laboratory norms & standards, our Hardness Testing Machine is produced using the latest technology. For bulk orders of Hardness Tester Hardness, contact us. We are the celebrated Manufacturer, Exporter and Supplier of Hardness Testing Machine.

Find here Tile Abrasion Testing Machine, Tile Abrasion Tester manufacturers & OEM manufacturers India.

• Type: Hardness Testing Machine
• Color: Blue, Green, Orange, Sky Blue, White
• Voltage: 110V, 220V, 380V, 440V
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years
• Application: Checking Hardness
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Weigth: 20-30kg, 30-40kg, 40-50kg, 50-60kg, 60-70kg, 70-80kg, 80-90kg, 90-100kg

Purchase from us the Torsion Testing Machines (50Kg-m) at economical prices. These Torsion Testing Machines are performance-oriented, sturdy and durable. Further, they are in line with the international quality standards. To get these Machines at fair prices, contact us. Located in Haryana (India), we are a trustworthy Manufacturer and Supplier of Torsion Testing Machines (50Kg-m).Specification : Unique 'Talon-Claw" Grips for round and flat specimens Torsional speed of 0.1/0.2 RPM Torque Compensated motors Maintenance free gear box Auto Range selection with range selector wheel (Optional) 3 or 4 Torque ranges for higher accuracy (Optional) Load-Unload capability Variable speed drive (Optional) Digital Mode Also Available :  Torsion Testing Machine is designed for conduction torsion and twist tests on various metal wires, tubes sheet materials. Torque measurement is by pendulum dynamo meter system. Torque ranges can be adjusted. Torque can be applied to specimen by geared motor through gear box. Autographic recorder can be provided to know the relation between torque and angle of twist on specific request.

We are leading manufacturer and exporter in india offer cbr testing machine.

• Brand Name: Amesys india,AMESYS INDIA,AMESYS INDIA
• Color: Grey, White,Grey OR White
• Condition: New
• Automatic Grade: Automatic
• Power: 40W
• Power Source: Battery
• Application: Control Panels
• Certification: ISI Certified
• Feature: Easy To Use
• Temperature Capacity: High Temperature
• Type: Tablet Disintegration Tester,TABLET DISINTEGRATION TEST MACHINE,TABLET DISINTEGRATION TEST MACHINE
• Frequency: 45Hz
• Country of Origin: India,INDIA
• Operating Current: Double Phase
• Warrenty: 1year
• Puncture Voltage: 11000V
• Warranty: 1YEAR

• Feature: A hydraulic jack is fitted at centre of the base of the load frame, over which can be fitted lower platen and spacer block with the help of centering pin., A lead screw passes through the top of the f
• Material: Mild Steel
• Loading Range: 2000 KN
• Piston Stroke: 30 mm

• Type: Universal
• Certification: CE Certified
• Application: Testing
• Voltage: 440V
• Warranty: 1 Year
• Material: Mild Steel
• Frequency: 50 hz
• Capacity: 100KN
• Accuracy: 2%
• Speed Range: 1-200mm/min

• Type: NEW
• Brand Name: EROSE
• Color: black
• Place of Origin: INDIA

Glass agencies erose are manufacturer and exporter of all type of ophthalmic instruments. Glass agencies erose are manufacturer of examination torch .

• Country of Origin: India
• Application: Testing Material
• Weight: 500-600kg
• Color: Blue
• Voltage: 220V
• Condition: New
• Automatic Grade: Semi Automatic
• Driven Type: Electric
• Brand Name: BYANLAB
• Function: Bitumen
• Type: Compression Testing Machine

• Capacity: 1000 kn
• Automatic Grade: Manual 
• Material: mild steel
• Weight: 125 kg
• Country of Origin: Made in India
• Display Type: Analog
• Brand: Reliable Lab Equipment Co.
• Model Name/Number: RLEC-101
• Features: Optimum performance, Durability, Dimensional accuracy

We provide a premium quality Tablet Disintegration Test Machine to our clients. The Tablet Disintegration Test Machine, we manufacture, is a test equipment work on UP and DOWN movement of Tablet in Medium of water kept 37 degree C. Our Tablet Disintegration Test Machine is built on a steel cabinet, which housed a geared motor for the vertical shaft drive the shaft moves up and down. On the upper end of the shaft fitted a horizontal strip with clamp on either side. These clamps hold glass vessels open at both ends and with stainless steel wire gauge with rubber rings at the lower end, which dips in water. Specifications Two independently thermostatically controlled hot plate rating 65 watt are fixed on the top of the cabinet upon which beaker 1000 ml size are net filled with waterThe temperature of Tablet Disintegration Test Machine is maintained at 37 degree C with and accuracy of 1 Degree CIndependent switches with neon indicators for motor hot plate are fitted on a panelMains fues with Digital Temperature meter and plug provided. Work on 220 Volt AC mains

• Thickness: 2-5 Mm
• Color: Customize
• Feature: Durable
• Size: 5ml 10ml 25ml
• Condition: New
• Power: Electric
• Capacity: 5-50 ml

Having a definite quality management system, we are regarded as the noteworthy firm, engaged in offering quality assured gamut of Test Tube Making Machine.   Use : Making test tubes of different sizes   Features: Trouble free performance Robust design Easy maintenance

• Type: Civil Engineering Test Equipment
• Certification: Blue
• Weight: 100-1000kg
• Condition: New
• Automatic Grade: Manual, Semi Automatic
• Warranty: 1yr
• Engine Power: 0-20BHp
• Country of Origin: India
• Brand Name: New Tech Need
• Color: Blue

NAUGRALABS LABORATORY PRODUCT NAME: LOS ANGLES ABRASION TESTING MACHINE FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-036009 Description and Specification for Lab Tenders The machine consists of a hallow cylinder mounted horizontally on a sturdy frame on ball bearings.. Material Testing Lab equipment manufacturers,exporters and Material Testing Lab suppliers There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test. A detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 r.p.m. A revolution counter is fitted to the frame. A tray is supplied for collection of the material at the end of the test. Complete with abrassive charges consisting of a set of twelve hardened steel balls, approximately 48mm dia. Suitable for operation on 440 volts, 3 phase, 50 cycles, A.C. supply civil lab equipments manufacturers

• Sample Capacity: 180g apprx.
• Power Required: 220 V AC , 50 Hz
• Weight :: 13 kg apprx.

Equipped with digital timer Supplied with sieves, weight, and sieve.