Transformers Dealers in Punjabi Mohalla, Ambala

We are offering dimmerstat.

Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I - core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I - core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories.

• Brand Name: RAI
• Cooling Type: Dry Type/Air Cooled
• Phase: Single Phase
• Mounting Type: DEMOUNTABLE
• Usage/Application: educational
• Voltage Rating: 220 Volt
• Output Voltage: CUSTOMIZE

We have carved a niche as one of the prominent Physics Instruments Manufacturers and Exporters from India. Various national as well as international clients are placing bulk orders for the Physics Lab Instruments due to the unmatched quality and accuracy in performance. The use of optimum quality materials also make them ideal for respective applications. Additionally, customers are eased with the availability of the General Physics Instruments in sizes and dimensions meeting the international standards.

• SIZE: 19 mm 300 turns, 19 mm 600 turns.

Low Voltage Coils For Demountable Transformer Each wound on a rectangular insulated bobbin, connections by 4 mm sockets spaced at 19 mm 300 turns, 19 mm 600 turns.

We are offering auto transformer. Continuously variable voltage autotransformer, protected type. Comprises a tordially wound transformer with a continuously variable output voltage 0-260 volts a.c. Steplessly under full load. Input 220-240 volts a.c. 50 hz. In stout metal case mounted on a metal base with two output terminals. Single phase with mains cable.

• Material: Metal
• Operating Type: Manual
• Warranty: 1 Year
• Finishing: Polished
• Model: GWL820
• Pack Type: Carton Box

Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I – core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I – core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories. 

Designed primarily for demonstration of basic principals of the A.C. transformer. The coils and cores will also serve as the basis of many experiments in electromagnetism using either direct or alternating currents. Supplied with 1 Clamp base, 1 Laminated 'U' core, 1 Laminated armature, 2 Soft iron pole pieces, 1 Coil of 300 turns 4 amp., 2 Coils of 600 turns 2 amp., 1 Coil of 1200 turns 1 amp., 1 Coil of 3600 turns 0.3 amp, 1 Coil of 12000 turns 0.05 amp. All coils are enamelled copper wire wound round on high impact plastic moulded bobbins. The base is provided with tommy -bar screw to hold 'U' core. It consists of following components: a) Alloy stand with detachable clamping arms. b) U & I laminated cores of cross section 32 x 25mm. c) E & I laminated cores of cross section 32 x 25mm. d) Six coils, with 4mm socket terminals wound on plastic bobbins e) A pair of pole pieces. Note: Coils of different values and turns are also available.

Single phase double wound copper transformer having primary 230VAC and secondary 115V AC with a rated capacity of 1KVA. The primary and secondary terminals are brought out for conducting laboratory experiment with legend printed for convenience. This is assembled in a powder coated MS metal box. Specifications: Primary : 230 V AC Secondary with tappings at 86.6% and at 50% of primary voltage. Rated capacity: 1KVA Terminations: Separate 4mm Banana terminals at input and outputs Enclosure: Powder coated MS metal cabinet, with separate screw terminal for earth connection.

• Certification: CE Certified
• Color: Sliver
• Voltage: 440 V
• Operating Type: Manual
• Driven Type: Electric
• Finishing: Unpolished
• Shape: Racket
• Cooling Type: Oil Cooled
• Usage: Industrial
• Name: Auto Transformer

• Material: Stainless Steel
• Application: Main Door
• Voltage: 12volts
• Operating Temperature: 10-20Degree C
• Country of Origin: India
• Brand Name: NAVKAR SYSTEMS
• Product Name: Coil for ALBA and CP Plus Electronic Door Lock

Lock Type for Electronic RIM Lock Brand CP Plus Access Method Any Ideal For Main Door Finish Type Stainless Steel Model Name/Number ERimLock Working Current 500 mA Weight 100g Working Voltage 12 VDC Size 148 x 107 x 107 mm If the Electronic RIM Lock gets Disfunctional, then the first thing to check if the coil is working correctly or not We have Standard Coil for All types of Electronic RIM Lock like Navkar Systems, UNI, Secureye, Alba, CP Plus, Linc Plus, Link Plus etc. Additional Information: Item Code: ERimLock Production Capacity: Any Qty Delivery Time: Immediately Packaging Details: Box Packing

Located at Ambala(India), we are reckoned for providing excellent array of products throughout the country. By keeping records of the leading market demands, we have developed a secure payment procedure that offers a plenty of options for making transactions.

• Brand Name: TD
• Speciality: Robust clamping base,Fitted with shielded plugs,Enameled copper wire
• Usage: Electrical work,University labs,Space aircrafts
• Country of Origin: Ambala Haryana
• Product Name: Dissectible Transformer
• Condition: Good

We offer our clients, the Dissectible Transformer. The Dissectible Transformer has been designed primarily for demonstration of the basic principles of the a.c. transformer. . The various coils and cores will also serve as the basis of many experiments in electromagnetism, using either direct or alternating current. To this end, the number of turns, the direction of winding and the continuous maximum rated current are marked on each coil. Features Robust clamping baseFitted with shielded plugsEnameled copper wire Applications Electrical workUniversity labsSpace aircrafts

• Phase: Single Phase
• Power: 55 Watt
• Input Voltage: 220 Volts
• Output Voltage: 420 Volts
• Frequency: 50 Hz
• Material: Mild Steel

• Phase: Single Phase
• Power: 35 Watt
• Input Voltage: 220 V
• Color: White
• Frequency: 50-80 Hz

• Material: Mild Steel
• Shape: Rectangle
• Color: Sliver
• Voltage: 220 V
• Finishing: Coated
• Driven Type: Electric
• Operating Type: Automatic

We have maximum expertise in delivering the finest range of Dissectible Transformer to our clients. Being one of the vital manufacturers and exporters from Ambala, Haryana, India, the offered products are highly appreciated in the market, and we manufacture these using premium raw materials. This product, supplied by us, is long-lasting and requires low maintenance cost. Before supplying to the clients, this item is quality-tested, and we source it from authentic vendors in the market.   Details : This apparatus has been designed primarily for demonstration of the basic principles of the a.c. transformer. The various coils and cores will also serve as the basis of many experiments in electromagnetism, using either direct or alternating current. To this end, the number of turns, the direction of winding and the continuous maximum rated current are marked on each coil. In the basic transformer set all coils are fitted with 4mm socket connection, but 600-, and 1200-, turn coils are available (as accessories) fitted with shielded plugs for connection to the a.c. Mains supply. All coils are of enamelled copper wire wound on high impact plastic molded bobbins 75mm long with cheeks 75x60mm. The robust clamping base is provided with a tommy-bar screw to hold the 'U' core , and two knurled nuts to secure the armature and provide for easy changeover of the coils. Soft iron pieces are provide which lovate on top of the 'U' core arms. One end of each pole piece is flat so that the pole pieces in situ provide a narrow gap with the full cross-sectional area,while the other end is in the form of a truncate cone giving a narrow concentrated field between the poles.   Contents : 1 Clamp base. 1 laminated 'U' core length of side 133mm, base 95mm, section 32 x 25mm. 1 laminated armature 95 x 32 x 25mm. 2 soft iron pole pieces. 1 300-turn 4A coil. 1 600-turn 2A coils. 1 1200-turn 1A coil. 1 3600-turn 0.3A coil, center tapped. 1 12000-turn 0.05A coil. 1 detailed instruction book.   Model Number : GP-549.1

• Brand Name: UNICON
• Model Number: UI-300

We are offering single phase auto transformer • closed type input voltage 220, output voltage 0-270v. • closed type with bakelite knob on top. • output through 4mm terminals • current rating: 2-15a available

Code: EEY0002 Oil Cooled Transformer. Oil Cooled Transformer ManufacturerFeatures:    Copper coils are wounded with perfect tappings on the both secondary and primary sides    Air cooled transformer made up of grade laminated core of silicon stamping used.    Terminals insulated for both primary and secondary with properly marked    Facility of outlets and inlets with stop-cocks    For transformer cooling perfect fins are equipped in oil cooling type    MS powder box in housed transformer to prevent from rust    For the high insulation strength, primary and secondary coils are impregnated in vacuumAvailable Ratings    1KVA/ 2KVA/ 3KVA/5KVA upto15kva with voltage ratio 415/415v or 415/215v or as per requirements.    Perfect type of oil/air cooled type  of transformer basically used for various experiments:    In order to known its efficiency and parameters of its same circuits sumpner back to back tests are  performed    In order to known its efficiency and parameters of its same circuits QC and SC tests are conducted on 3 phase transformers.    To study the performance of 3-phase transformer for its various connections, i.e. delta/ delta-star star-star /star-and delta-delta and find the magnitude of 3rd harmonic current

Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I - core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I - core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories.

• Phase: Single Phase
• Power: 55 Watt
• Input Voltage: 220 Volts
• Output Voltage: 420 Volts
• Frequency: 50 Hz
• Material: Mild Steel

Demonstration Transformer P-7885 Operates on 220V A.C. mains, 50Hz. Two secondary coils to produce 6V and 12V at 2A can be mounted one by one, over the primary coil. The mains coil is provided with 1meter of two core cable and secondary coils are mounted with 4mm socket terminals. Students can easily mount or demount the transformer unit to get a 6V or 12V power supply as per requirement. Demountable Transformer P-7895 It consists of a cast alloy stand with heavy base and two removeable clamping arms to hold the cores and laminated U & I cores of cross section 32 x 25mm to form a close loop, 6 coils (1 each of 300, 600, 3600, 12000 turns and 2 of 1200 turns). Same as above, but can cross section 40 x 40mm P-7896 Demountable Transformer P-7898 Similar to above, but consists of alloy stand with heavy base and two removable clamping arms, two coils of 300 and 1200 turns of size 32 x 25mm, height 75mm.

• Certification: ISI Certified
• Usage: Industrial Use
• Working Frequency: 60hz
• Speciality: Easy To Install, Sturdy Construction
• Output Type: AC Single Phase
• Tensile Strength: 150-175Mpa
• Temperature Capacity: Medium Temperature
• Output: 2, 4, 6, 8, and 12 V

transformer fitted in elegantly painted metal case, output 2, 4, 6, 8, and 12 v at 8 a through 4 mm sockets workable on 230-240 volt a.c. Input.

• Phase: Single Phase
• Item Code: AP-177
• Power: Electrical
• Input Voltage: 220volt
• Output Voltage: 35 Watt and 55 Watt
• Color: White
• Frequency: AC

Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I - core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I - core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories.

• Type: ISOLATION
• Inductance: 1000µH
• Resistance: 500mΩ
• Frequency: 200 KHz.
• I/O Ratio: 1
• Operating Temperature: -40°C TO +85°C
• Humidity: 0-95% RH

Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I - core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I - core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories.

We bring forth an advanced range of Lamp Transformers that are required for various applications. Lamp Transformer is manufactured by us using premium quality raw materials to offer a quality which is highly appreciated by clients, resulting in repeated demands from all over the world. Sodium Vapor Lamp Transformer : 35W55W Features : Anti-dust modelHighly efficientResistant to power fluctuationsCompact structureDurable Finds Application in : Academic sectorIndustrial sector

The Type T MultiTap Universal Control Transformer allows 120V or near 120V control power from a wide variety of available source voltages.

• Automatic Grade: Automatic
• Application: Industrial Use

The product is used in instrumentation lab