Universal Testing Machine Dealers in Ambala

Universal Testing Machine : Alpha Chem is manufactures,exporter & suppliers Universal Testing Machine. Universal Testing Machine : Loading frame  The base has a hydraulic cylinder at Its center, and two main screws at both ends. The middle cross head is mounted on screws through main nuts. The middle cross head can be moved up or down with a speed of 400 mm/min through chain transmission and geared motor to adjust the initial tensile / compression clearance. On the piston rests an assembly of upper, lower crosshead and two columns. The individually lapped cylinder piston assembly ensures smooth transfer of force with minimum friction. Hydraulic system Hydraulic circuit consists of hydraulic power pack having a directly driven radial plunger pump, which gives a continuous non pulsating flow of oil pressure upto 210 bar. Oil filter, Oil strainer, Air breather, Oil level Indicator, Drain plug are provided on the power pack. A pressure compensated needle type flow control valve is provided to control the oil flow to cylinder there by achieving desired piston speed. Infinitely variable speeds can be obtained with the help of valves. Load measuring system  The oil pressure in the main cylinder Is transferred to the small dynamometer cylinder. The dynamometer piston is kept rotating at a slow speed to ensure dynamic friction condition. The piston exerts a force proportionate to the pressure on the hanger connected to one arm of the pendulum, through an auto range selecting lever system. This force deflects the pendulum. The range selection can be effected by simply turning a knob, provided outside of the panel. An effective damping arrangement is provided to ensure slow return of the pendulum after sudden fracture of the test specimen. Load indicating arrangement The pendulum lever pushes rack which slides over two pulleys. The rack movement is proportionate to the load. A pinion in engagement with the rack rotates and moves the pointer fixed to its shaft. The pointer moves over a large dial indicating the load. A window type dial is provided for easy and clear change of the load range. Recording System A continuous roll type load elongation recorder is provided for plotting a load - elongation graph. Load is plotted by the horizontal movement of the rack. Elongation is plotted on the vertical axis and is equal to the movement of the main piston. Elongation ratio of 1:2 &1:5 can be obtained. Accuracy and calibration All measuring ranges of the machine are calibrated within an accuracy of ± 1 %from 20% to 100% of each range as per IS: 1828 and BS :1610. Load measuring system The oil pressure in the main cylinder is also transferred to an electronic pressure transducer which gives a proportionate signal to the Data Acquisition Unit. Both, the motor for hydraulic operation and cross head motion, are controlled by push buttons and they have interlocks to prevent simultaneous working of the motors. The electrical panel is fixed on the control panel. Displacement measurement is carried out by means of a Rotary Encoder. Encoder signal is fed to the Data Acquisition Panel to get displacement in mm. Fully protected and enclosed (dust proof) high precision Sensors and Encoders are used for Load and Elongation measurement.

Based in Haryana (India), we are a notable Manufacturer and Supplier of Universal Spring Testing Machine. We have a team of adroit professionals who use high-grade materials and the latest production methods for fabricating the Spring Testing Machines. Their features like sleek design, remarkable performance and high durability make them an attractive deal at such reasonable prices. Details : The machine is designed to conduct tention test and comperision test on spring specimen and calculate the "K" factor. The comperision plates are harded ground and polished with guides provide on the bottom platen to eliminate slippage of spring during testing. Specifications : Mechanical version Load indicated or graduated dial scale Electric digital version Load indicated on misprocesses based digital indicator Computerized version Load and elongation are displayed on computer monitor along with Data analysis and reporting software

• Brand Name: ALPHA CHEM
• Model Number: ALPHA CHEM-1398

Universal Testing Machine : Alpha Chem is manufactures,exporter & suppliers Universal Testing Machine. Universal Testing Machine : Loading frame The base has a hydraulic cylinder at Its center, and two main screws at both ends. The middle cross head is mounted on screws through main nuts. The middle cross head can be moved up or down with a speed of 400 mm/min through chain transmission and geared motor to adjust the initial tensile / compression clearance. On the piston rests an assembly of upper, lower crosshead and two columns. The individually lapped cylinder piston assembly ensures smooth transfer of force with minimum friction. Hydraulic system Hydraulic circuit consists of hydraulic power pack having a directly driven radial plunger pump, which gives a continuous non pulsating flow of oil pressure upto 210 bar. Oil filter, Oil strainer, Air breather, Oil level Indicator, Drain plug are provided on the power pack. A pressure compensated needle type flow control valve is provided to control the oil flow to cylinder there by achieving desired piston speed. Infinitely variable speeds can be obtained with the help of valves. Load measuring system The oil pressure in the main cylinder Is transferred to the small dynamometer cylinder. The dynamometer piston is kept rotating at a slow speed to ensure dynamic friction condition. The piston exerts a force proportionate to the pressure on the hanger connected to one arm of the pendulum, through an auto range selecting lever system. This force deflects the pendulum. The range selection can be effected by simply turning a knob, provided outside of the panel. An effective damping arrangement is provided to ensure slow return of the pendulum after sudden fracture of the test specimen. Load indicating arrangement The pendulum lever pushes rack which slides over two pulleys. The rack movement is proportionate to the load.

• Type: Universal
• Certification: CE Certified
• Application: Testing
• Voltage: 440V
• Warranty: 1 Year
• Material: Mild Steel
• Frequency: 50 hz
• Capacity: 100KN
• Accuracy: 2%
• Speed Range: 1-200mm/min

• Type: Universal Cylindrical Grinding Machines, Universal Testing Machine
• Weight: 1-5 Ton, 100-1000kg, 1000-10000kg, 10000kg-1 Ton, 5-10 Ton
• Color: Black, Brown, Grey, Maroon, Red
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Application: Testing
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 10-15kw, 15-20kw, 3-5kw, 5-10kw
• Warranty: 1 Year, 2 Years

• Capacity of Load frame: 10, 20, 40, 60, 100 (KN)
• Grip (Tensile Test): 10 to 25 mm round grip
• Supply Voltage: 3 phase : 415V : 0.5HP, Single phase : 230 V

It is based on the constant hydraulic principle. The machine provide tension & compression test. Load frame depend on the machine capacity. Middle slide is moving with the help of leading screw and upper slide is stile with help of two pillars. Lower slide up & down with help of hydraulic cylinder to control oil tank, pump and two wall & limit switch to auto stop. Pressure tra juicer and sensor connected directly indicates the load & displacement (elongation) in digital form in newton and kg as we set and displacement show in mm. Middle slide traveling speed is 80mm _+ 5mm per min. Lower slide traveling speed is 25mm _+2mm per min. Measuring the load with help of hydraulic pressure and genuine software and rs232 port connect to the computer.

NAUGRALABS LABORATORY PRODUCT NAME: UNIVERSAL TESTING MACHINE SERVO CONTROL FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-111001 Description and Specification for Lab Tenders Universal Testing Machine Servo Control.  Precision ball screw and fast acting servo motor provides controllability at very light loads and rigidity for loads to machine capacity. Integral operator station with emergency stop button, manual jog controls, load cell and extensometer connections, digital closed loop control and data acquisition electronics. Three fast acting digital controllers are available for accurate and repeatable testing. Bench top models from 2KN to 50KN provide the flexibility to test biomaterials, wire, textiles, packaging, elastomers, plastics, films, foils and other materials with confidence. Floor Standing Models from 50KN to 150KN accommodate larger specimens and fixturing. With a variety of grips and fixtures, all eXpert machines are capable of performing tests in compression, tension and flexure. Accessories Digital Controller  This is a stand-alone controller that features load and crosshead position inputs, enough memory to store 6 test methods, data analysis for measuring peak load, peak stress, load at extension, extension at load, average load, load at break, extension at break, stiffness and free height. The controller is ideal for product or QC testing and is capable of displaying pass/fail messages after each test based on user specified limits. Results can be uploaded to a PC via the on-board RS-232 serial port for import into test reports, spread sheets or database programs. Raw XY data can also be uploaded for further analysis or for generating load vs. deflection curves. The controller can be programmed to run at a constant rate until the specimen breaks, run to a load and hold for a user specified period of time, or cycle between load or position limits. Precise Controller The Precise Controller features a keypad, an upper LCD character display for user input and indication, a lower graphical display for viewing stress vs. strain curves plus push-buttons for test start and return to home. The Precise has the ability to perform closed loop load, position or strain controlled tests to sample break or to a user defined setpoint. Test results including date, time, specimen number, peak load, ultimate tensile strength, offset yield strength, modulus of elasticity, elongation at break plus raw data can be exported to a Windows based computer via the RS232 port. WinTest : Material Testing Software The most powerful and versatile solution features Win Test, PC/Windows based materials testing system. Standard with Win Test are load, crosshead position, axial strain, transverse strain and auxiliary input channels. A comprehensive set of monotonic, segmented or cyclic servo control profiles under load, position or strain control is available which provides the capability to perform virtually any type of test. Test reports featuring test and specimen information, results and a stress vs. strain curve can be printed or readied for email.  mechanical lab equipments manufacturers  Steel & Metal Mechanics Lab equipment manufacturers,exporters and Steel & Metal Mechanics Lab suppliers

• Material: Mild Steel
• Brand: Eletech-Eletech Lab Instruments
• Model No: ELI-1926
• Display: Digital
• Maximum capacity: 600KN
• Measuring Capacity: 100KN
• Category: Civil Lab
• Tag: Universal Testing Machine

1.Peak load along with on line load2. Maximum elongation with online elongation3. Ultimate Tensile Strength4. Graphical Display of Load vs. Time5. Graphical Display of Elongation vs. Time6. Graphic Display of Load vs. Elongation7. Graphic Display of Stress vs. Strain8. Complete Statistical Analysis9. Data Report Management

The Machine is designed to conduct tension test and compression test on spring specimen and calculate the 'K' factor.The compression plates are hardened ground and polished with guides provide on the bottom platen to eliminate slippage of spr..

Universal Testing Machine, Microscope, Ophthalmic Instruments

Universal Testing Machine, Educational Equipment, Survey Lab Equipment

Universal Testing Machines, hardness testing machines, Lab Testing Equipment