Vicat Apparatus Dealers in Ambala

• loads: 1 kg or 5 kg

Vicat Softening Point Apparatus - Vicat softening temperature of plastics is the temperature at which a standard flat-ended indenter penetrates one millimeter into the surface of the material under test under a specified load. The test is conducted by placing a test specimen taken from the sample under test on a flat platform inside a liquid bath and applying compression load over its upper face through a flat-ended indenter. The load is applied by placing a dead weight on the upper end of the indenter. After the test specimen attains the temperature of the bath, the bath temperature is increased gradually till the indenter penetrates by exactly 1 mm into the test specimen. The bath temperature in ºC at which this happens is reported as the Vicat Softening Temperature of the sample under test. The Vicat Softening Point Apparatus (High Temperature Model) consists of a specimen support, weights, a deflection measuring device, and an immersion bath. The specimen support consists of a circular supporting plate on which the specimen is kept and a loading plate having a bush for guiding a vertical rod carrying a hardened indenting tip. The two plates are joined together with spacer rods of same material (brass) as indenting rod so that they have identical co-efficient of linear expansion.

Vicat Needle Apparatus : Used to determine the amount of water required to produce a cement paste of standard consistency and the setting time. The time it takes for a cement to stiffen to a standard value after addition of water is commonly known as the set time. The test involves mixing cement with water and then measuring its resistance to penetration of a standard probe at varying intervals of time, until a certain value is reached.   Specifications: Consist of a metallic frame bearing a movable rod with cap at one end. The needles and plunger can be fixed centrally in to the rod by clamping screw. The movable rod carries an indicator which moves over a graduated scale attached to the frame. The scale is 40mm in length with the smallest division of 1mm. The dashpot facilitates the gentle lowering of the movable rod with needle. The vicat mould can be in the form of frustum of a cone having 70 mm in dia at the base, 60 mm at the top and 40 mm high or split type. A non porous base plate of glass or metal also provided. Complete with consistency plunger, initial and final setting needles in a nice jewellary case.

NAUGRALABS LABORATORY PRODUCT NAME: VICAT SOFTENING POINT APPARATUS HIGH TEMPERATURE FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-370009 Description and Specification for Lab Tenders Vicat Softening Point Apparatus High Temperature For Testing Lab Workshop.  Vicat Softening Point Apparatus High Temperature - For Testing Lab Vicat softening temperature of plastics is the temperature at which a standard flat-ended indentor penetrates 1 mm into the surface of the material under test under a specified load. The test is conducted by placing a test specimen taken from the sample under test on a flat platform inside a liquid bath and applying compression load over its upper face through a flat-ended indentor. The load is applied by placing dead weights on the upper end of the indentor. After the test specimen attains the temperature of the bath, the bath temperature is increased gradually till the indentor penetrates by exactly 1 mm into the test specimen. The bath temperature in degrees centigrade at which this happens is reported as the Vicat Softening Temperature of the sample under test.   The  Vicat Softening Temperature Apparatus for plastics consists of a hinged metallic frame which serves as support for the test specimen. The frame is fitted with a bush for guiding a rod with a hardened indenting tip at its lower end and a loading platform near its top to place the weights on. A dial gauge is fitted at the upper end of the frame to measure the movement of the rod. The parts that are immersed in the bath during the test are made from brass. The indentor is made from high speed steel. civil lab equipments manufacturers    Plastic Films Testing Lab equipment manufacturers,exporters and Plastic Films Testing Lab suppliers

Vicat apparatus is one of the apparatuses widely used in engineering labs. The instrument is intended to determine the normal consistency and time of setting of Portland cement. The apparatus consists of a rod weighing 300 grams and needle in each end, braced in a frame with a scale mounted to calculate the distance to which the needle enters the cement.

• Brand Name: JLab
• Place of Origin: India

This instrument is used for determining the normal consistency and setting times of cement and �A� Class limes. but in addition is fitted with a dash pos which facilitates gentle lovering of needles. Salient Features Accessories : Mild steel base plate 5 inches x 5 inches. Fulcrum mould, brass, 70mm 1.0 base dia x 60mm I.D. top dia, 40mm height.

• Finishing: Powder Coated
• Brand: Eletech Lab Instruments
• Model No: ELI-2124
• Usage/Applications: Laboratory
• Material: Cast Iron
• Standard Accessories: SETTING NEEDLE ,MOULD AND GLASS PLATE ,A frame ,Needles Plunger ,Movable Rod ,Graduated Scale ,Vicat Mould ,operation manual
• Packing: Corrugated Box
• Category: Civil Lab
• Tag: Vicat Needle Apparatus

• Features: Sturdiness, High performance, Durable

Vicat Needle Apparatus, civil lab equipment, Volumetric Pipette