Back Back
QUEBRACHO ATOGC
110 - 115 Per Kilogram
1000 Kilogram (MOQ)
POPQUEBRACHO ATO POWDER QUEBRACHO POWDER is a powder product obtained by chemicallly treating natural quebracho extract in order to achieve full cold water solubility and containing the largest tannin percentage among vegetable extracts. It is normal spray-dried extract. It is excellent for drum tannage and also for the retannage of chrome leather. TYPICAL ANALYSIS : Physical Aspect : Light reddish brown hygroscopic powder. PCP : Free Tannins % : 72% + 1.0 Non Tannins % : 20.0%+ 2.0 Moisture : 8.0% maximum pH ( 1:10 soln.) : 4.7-5.3 Ash % : 6.8%+0.5 PROPERTIES : Popquebracho ATO Powder is fully soluble in cold water. It has the following characteristics for vegetable tannage : High tannin content. Quick penetration at natural pH. Excellent tanning properties. Uniform quality. Not dusty. Non – astringent. Good weight yield. Full compatibility with vegetable tans and syntans. It is particularly suitable for vegetable tanning of all kinds of leather, as well as for combined tanning and chrome leather retannage. For retannage of chrome leather Popquebracho ATO Powder permits : Better buffing properties. Excellent polish effect. Bellies and flanks fillings. To keep embossing effect. ……..2….… APPLICATIONS : Popquebracho ATO Powder may be used alone or blended with other vegetable extracts. The following use is recommended : Based on limed weight : 25-30% of Popquebracho ATO Powder for vachetta tannage ( veg. Leather ). 40% of Popquebracho ATO Powder for soles tannage. Based on shaved weight : 3-18% of Popquebracho ATO Powder for chrome leather retannage. RECOMMENDATIONS : During the leather production, there may be a risk of iron contamination. In order to prevent this, we suggest to use an iron – sequestering agent such as Pop DS Powder ( 0.2% on the reference weight), which may be added together with the first addition of tanning agents on the tanning or retanning processes. Powder extract dissolution should be performed by means of mechanical shaking. If done manually, it is advisable to work by dissolving the contents of each bag. The use of water at 35 ºC facilities dissolution and prevents lump formation. Using small amounts of sodium metabisulfite and formic acid in tanning liquors and processes lightens the colour and improves the appearance of the end-products. STORAGE: Popquebracho ATO Powder maintains its characteristics unchanged if properly stored in dry premises protected from sunlight in closed bags. PACKING: Popquebracho ATO Powder is presented in powder form, dedusted, and packed in 25 Kgs. fine HDPE bag nett weight.
Color : Red, RED
Form : POWDER
Application : Industrial
Purity : 99%
Packaging Type : HDPE BAGS
Type : Leather Tanning Chemicals
Shelf Life : 2 Yrs
Country of Origin : SOUTH AFRICA
Brand Name : POPLONCHEMIE
...more
poptan wle fine pale beige powder
80 - 120 Per kg
White replacement syntan. POPTAN WLE is mainly used as retanning for white chrome leather.Details Nature : Phenol Condensation product. ANALYTICAL DATA Concentration : 96% pH ( 1:10 soln. ) : 3.0-3. 5 Properties Poptan WLE is a fine pale beige powder, readily soluble in water. Poptan WLE provides good, light fast white coverage on chrome leather and produces a fine, tight and smooth grain. Poptan WLE renders good filling effect and brightens the colour considerably in dyeing of pastel and clear shades. Poptan WLE when used in retannage of chrome leathers produces leather which has good buffing properties. Poptan WLE is compatible with all synthetic and vegetable tannins and when used in vegetable tanning, it accelerates the penetration of vegetable tannins and brightens the colour of the resultant leather.
...more
Poptan SW
100 - 120 Per kg
A non-yellowing synthetic white syntan which is phenol & formaldehyde free.Analytical Data Chemical Type : Synthetic Cellulose Concentration : 94% (+ 2 ) Active Matter : 80% pH of 10% solution : 4.0-5.0 Solubility : Readily soluble in water Charge : Anionic Appearance : White Powder Moisture Content % : 3.0% Properties Poptan SW is a white powder readily soluble in water. Poptan SW provides good, light fast white coverage on chrome leather and produces a fine, tight and smooth grain. Poptan SW renders good filling effect and brightens the colour considerably in dyeing of pastel and clear shades. Poptan SW when used in retannage of chrome leathers produces leather which has good buffing properties. Poptan SW is compatible with all synthetic and vegetable tannins and when used in vegetable tanning, it accelerates the penetration of vegetable tannins and brightens the colour of the resultant leather. Poptan SW is an environment friendly filling syntan that contains no hazardous material. ApplicationsPOPTAN SW is suitable for a wide range of applications in the production of : Full chrome and retan upper leathers. Aniline and pastel coloured leathers. Suede clothing leathers. In clothing nappa. In vegetable tanning
...more
Poptan PG 50
165 - 200 Per kg
Typical Analysis Colour : Pale Yellow Appearance : Clear Liquid pH (1:10 soln.) : 3.5 + 4.0 Glutaraldehyde Content : Readily Miscible with water Solubility : Readily miscible with water Chemical Nature : 1,5-Pentanedial Glutaraldehyde Applications Poptan PG 50 possesses a number of important properties as a tanning and retanning material . It gives softer and further leathers. It has a wide range of application in chrome, vegetable or combination tannages . Poptan PG 50 improves the uptake of chrome, when used in rechroming system, giving a fuller , softer leather with a fine break. Recommended addition 1%-4% based on shaved weight. Poptan PG 50 is highly recommended for the semi-chroming of E.I. & vegetable tanned leathers. By offering a rectangle with Poptan PG 50 before chrome , it is possible to reduce the chrome offered and achieve an increase in the shrinkage temperature of the leather. This increase is considerably greater than the one obtained in a conventional semi-chroming process . The improvement in fullness and softness of the finished leather is an added advantage . Recommended addition 1%-5% based on crust weight . Poptan PG 50 is also suitable for the tannage of pickled woolskins in combination with chrome, where it reduces the risk of chrome staining and gives white wool. It is recommended to give an addition of 3 gms 4 gms. Per litre of the float . Poptan PG 50 when used as a neutralizing agent for chrome leather , it fixes the chrome and virtually eliminates bleeding of chromium into the solution. Its use for this purpose can make a significant contribution to improving the quality of effluent where chrome is a problem. Recommended addition 1%-4% based on shaved weight . StoragePresents no problem under normal storage conditions and has an indefinite shelf life.
...more
Poptan CSN
POPTAN CSN is a combination of basic chromium salts and a lightfast white tanning agent. The product can be used as selftanning agent or as pretanning and retanning agent in vegetable and chrome tannage. It imparts to the leather a particularly soft handle and a tight grain.Analytical Data Concentration :88-90% Chromium Oxide : 12% pH of 10% solution : 4.0 Appearance : Pale green powder readily soluble in water. Properties Poptan CSN is primarily used for the production of leathers with mellowness and supple grain without altering the chrome. leather character. The use of Poptan CSN retains fineness and tightness of grain and prepares the leather for level dyeing. It is preferable to use Poptan CSN in powder form, 4-8% Poptan CSN may be used depending on the type of leather. Poptan CSN is recommended for neutralizing and retanning of chrome leathers. It also has complex forming and buffering properties. Applications For the tannage of low chrome wet blue to improve uptake, 1%-2% is recommended. For the retannage of chromed stock, sides, skins or splits for clothing and gloving, 2%-6% is recommended. When used as retanning agent for E.I. tanned goat skins, it imparts an extremely soft handle and fills up the leather without unduly loading the gain. When used alone it yields white leathers of good fullness and highly resilient handle.
...more
Popsynthol SPF
70 - 100 Per kg
Versatile synthetic fatliquor NEFAT SPF is a versatile synthetic fatliquor having sperm and fish oil base.Characteristics Appearance : Clear Amber Liquid. Chemical Nature : Anionic fatliquor based on fatty ester and sulphited fish oil. Active Matter : 80% ( +2) pH of 10% solution : 8.0 Stability : Excellent. Light Fastness : Good. Properties POPTAN SPF has a strong emulsifying power and is ideal for all types of leather. POPTAN SPF imparts required degree of softness and fullness without making the grain loose and also imparts a pleasing handle and suppleness to the leather . ApplicationsPOPTAN SPF can be recommended for fat liquoring all types of leather,especially for softy upper,nappa,garment or upholstery.StorageStorage should be away from extreme conditions wherever possible.under extreme climatic conditions this product may separate slightly,So it should always be well stirred immediately prior to use.
...more
Popsynthoil MKV Liquid
65 - 75 Per kg
POPSYNTHOL MKV LIQUID is a versatile fatliquor combinable with all fatliquors and capable of producing leathers with inner softness of excellent level .Characteristics APPEARANCE : Clear Yellow liquid . Chemical nature : Anionic, based on synthetic oils , modified vegetable oil, esters of fatty substances and monohydric alcohol sulphited . Active Matter : 65% Approx. pH of 10% solution : 7 +/- 1 Stability : Stable in week acids, salt, hard water and vegetable tannin. Properties Produces good fullness. Imparts excellent softness. Exhibits good handle and feel . Is non-yellowing and non-spewing. ApplicationsPOPSYNTHOL MKV LIQUID can be recommended for fatliquoring softy leather, cow dry milled, buff upper, sheep nappa and split suedes.StorageStorage should be away from extreme conditions wherever possible. under extreme climatic conditions this product may separate slightly. So it should always be well stirred immediately prior to use .
...more
Popsynthoil LF-10
90 - 110 Per kg
Details Appearance : Slightly viscous light brown emulsion. Chemical Type : Sulphited high quality fish oil. Active Matter : 80% (±2) pH of 10% solution : 7.5 ±(0.5) Ionic charge : Anionic in nature. Stability : Stable to acid, alkali, salt and mineral tanning agents Properties Popsynthoil LF-10 is an all purpose anionic fat liquor for high degree of softness suitable for chrome and Semi Chrome as well as for vegetable tanned leathers. It is easily emulsifiable in water at normal temperature. Leather treated with Popsynthoil LF-10 not only possesses softness and . suppleness, but also, good tensile strength and water resistance. It imparts instant softness without high fat addition to the leather when it is partly incorporated in neutralization. We recommend 0.5-2.0% Popsynthoil LF-10 in neutralization, depending upon the degree of softness required. Popsynthoil LF-10 can also be used in rechroming prior to the addition of chrome powder to get extra softness and better chrome exhaustion. It has inherent properties, to open leather fibres and to. produce a fluffy, soft and round leather. Popsynthoil LF-10 has no effect on aniline dyes. It is satisfactorily fast to light and does not impart any yellowing to leather under normal conditions. ApplicationsDue to its excellent versatile properties, it can be used on a wide variety of leathers e.g. lining, upper, softies, upholstery, nappa, glove, clothing, etc. To avail its maximum efficacy to achieve desired softness, we recommend Popsynthoil LF-10 to be used stage wise i.e. in re-chroming, neutralization as well as in main fat liquoring.StorageStorage should be away from extreme conditions wherever possible. Under extreme climatic conditions this product may separate slightly. So it should always be well stirred immediately prior to use.
...more
Popsynth SOL 9B
70 - 100 Per kg
POPSYNTH SOL9B Sulphated natural oil in solvent. Popsynth SOL9B is a new special type of synthetic fat liquor for suede, nubuck, garment and gloving leather. It increases the brilliance and depth of the dyeing and imparts lustre and sheen to suede leathers.Popsynth SOL9B Gives a pleasing, silky handle. Gives a good lustre and two-way nap. . produces very soft Ieathers Used for re-fatliquoring of crust leather. Properties Appearance : Light Amber oil. Chemical Character : Sulphated natural oil in solvent. Active Matter : 80% pH of 10% solution : 6.5-7.5 Ionic Nature : Anionic Stability : Stable to weak acids, alkalis, tanning agents and electrolytes. Solubility : Readily soluble in all proportions with water. Compatibility : Good with anion-active, nonionic and cation-active substances. Applications Popsynth SOL9B when used in combination with other synthetic and natural fat, a thorough fatliquoring without bony feel and dry noise is achieved. Popsynth SOL9B also helps in reducing fatliquoring period when used in fat-mix. Popsynth SOL9B imparts dry feel on the leather surface which helps to improve adhesion of the finishing mix. Suede leathers when fatliquored with Popsynth SOL9B produces lustrous sheen and independant movement of the fibres. Its fastness to light and compatibility with anionic dyes without loss of shade makes Popsynth SOL9B suitable for fatliquoring softies, garment and gloving. Leathers at all levels of colour giving a silky handle to the leather.
...more
Popsynth SL47
85 - 100 Per KG
Details Appearance : Light Yellow Brown Opalescent viscous Liquid . Chemical Character : Blend of high molecular sulphited synthetic esters , solvent and long Chain alkanes . pH of 10% solution : 8.0 + 0.5 Stability : Stable at normal pH conditions to neutral salts , basis , acids , mineral salts and concentrations normally used in tanneries . Compatibility : Compatible with Anionic dyes , fat liquors as well as synthetic and vegetable tanning agents . Dissolution : Before adding to the floats , dilute with warm water until obtaining fluid consistency. Fastness of light : Good Properties Popsynth SL-47 is a light fast fat liquor based on synthetic sulphited esters, solvent and long chain alkanes . Popsynth SL-47 is higly penetrative fat liquor with high fat content and imparts excellent softness and body to leather . Popsynth SL-47 is an ideal fat liquor in the sense , besides giving the uniform lubrication it also paves the way for the uniform distribution and absorption of thesyntans , dyes and the other chemicals which are added subsequently . Popsynth SL-47 imparts full and soft feel to the leather without over fatliquoring and gives very warm and pleasant feel to the leather surface . It also imparts good smoothness to the leather surface . Applications Popsynth SL-47 is ideally suited for light weight leathers VIZ . Napps , Gloving and clothing leathers . Popsynth SL-47 can be best applied immediately after neutralization at an offer of 1 to 3% for light weight leathers , followed by normal retannage and fatliquoring . It redistributes the natural fat present in the leather . Popsynth SL-47 can be recommended for all types of leather , especially for shoe uppers,nubuck leathers , glazed kid goat uppers , garment or bag leathers and all type of seudes . StoragePopsynth SL-47 can be stored for about one year under normal conditions and temperatures . The product should always be stirred before use as a precautionary measure due to temperature changes.
...more
Popsynth 1194
110 - 150 Per kg
Characteristics Appearance : Brown liquid. pH of 10% solution : 6.5 + 1 Active Matter : 70% + 2 Fastness to Light : Excellent Properties Popsynth 1194 is an ideal fat liquor for all type of soft leathers. Popsynth 1194 imparts velvet, round feel to the leather surface. Popsynth 1194 Possesses excellent light fastness and helps in uniform dyeing. Popsynth 1194 has a strong emulsifying power and is ideal for sophisticated class of leather which require soft feel with light weight . ApplicationPopsynth 1194 is specially suitable for garment, nappa drymill,upholstery,nubuck ,etc.as it gives excellent softness with light weight.Storage StabilityPopsynth 1194 can be stored for about one year under normal conditions and temperatures. Under extreme climatic conditions this product may separate slightly, So it should always be well stirred prior to use.
...more
Popsoft GSIN
Cationic fatliquor of high light fastness and stability to electrolytes. POPSOFT GSIN is a weakly cation-active fatliquor which is very versatile in application because of its high electrolyte stability. It may be used in chrome tanning to give rapid, uniform through-tamning, and for its lubricating properties.as the main fatliquor for chrome tanned suede leather. as a top fatliquor for grain leathers. It enhances both softness and fullness and gives the leather, especially when used as a top fatliquor, a smooth, pleasing handle.Properties Appearance: white soft paste. Chemical Character: fatty acid condensation product. Ionic nature :cationic pH of 10% emulsion:4-5 Light fastness:very good. Storage stability:virtually unlimited. Stability:. Stability to solutions of acids and salts very good but restricted to solutions of alkalis. Dilutability and Compatibility: Readily emulsifiable in water at 50° further dilution can be done by cold Compatible with nonionic, cationic and anionic substances. Emulsion is stable water also. Applications Because of its high electrolyte stability, Popsoft GSIN can be used without difficulty even in liquors with a high electrolyte content. . In chrome tannages Popsoft GSIN promotes the distribution of the chrome and accelerates thorough tanning thus increasing the softness and fullness of the leather. It also acts as a lubricant and prevents thin leathers from becoming entangled when tanning at short liquor ratios. The product is added at beginning of the tanning process or even in the pickle. Amounts : Grain leather 0.2-0.5% Popsoft GSIN Suede leather 0.5-1.5% on the pelt weight. In the main or preliminary fatliquoring of suede leather An excellent, uniform, thorough fatliquoring effect is achieved with Popsoft GSIN. It gives the leather a soft, full handle and trouble-free buffing properties. It is advisable to add the product before neutralising or together with a retannage, if given. If a more pronounced surface fatliquoring is required, e.g. to produce a two-way nap effect, Popsoft GSIN can be super- fatted by adding raw oils such as neatsfoot oil, sperm oil, etc. to form an emulsion. This is best carried out before neutralisation or in conjuction with any chrome retannage. Amount : 2-4% Popsoft GSIN on shaved weight + 0.3% neutral oil. As a top fatiiquorforgrain leathers Popsoft GSIN is best added as a supplement to anionic fatliquoring baths to give complete bath exhaustion and to reinforce the fixation of the anionic fatliquors. The leathers are given a slightly greasy, pleasant handle, the grain elasticity is increased and the absorbency reduced. Amount : 0.3-0.5% Popsoft GSIN on shaved weight. Handle modifications for finished grain leather For a silky, slightly greasy handle Popsoft GSIN can be sprayed as a top finish on finished grain leather. Depending on the desired effect, solutions of roughly 10% concentration are used for this purpose. If deeper penetration is required, about 30-100 gms/litre isopropyl alcohol should be added to the solution. For upgrading of defective leathers Corrected grain leathers are given a pad coat with a 10% solution of Popsoft GSIN which helps in sealing the defects and thereby improves the film formation of the subsequent pigment coats. Sealing coat is to be adjusted to the desired effect using about 30-100 gms/litre isopropyl alcohol to take care of the adhesion of the subsequent coats.
...more
Popoil PVG9
80 - 80 Per kg
Details Appearance: Light reddish brown liquid. Chemical Type : Sulfonated vegetable oil. Active Matter : 60% (±2) pH of 10% solution : 7.5 Ionic Charge : Anionic Light Fastness : Fairly good. Stability : Stable to normal pH ranges of leather processing. Properties Popoil PVG 9 is a complete anionic fatliquor with wide range of application to almost all type of leathers, imparting some specific properties. Emulsion can be made with cold or hot water without any major variation in the particle size of the emulsion. Popoil PVG 9 produces leathers with pleasant touch and mellow handle. ApplicationsPopoil PVG 9 can be used for a variety of leathers, particularly medium light leathers like upper, garment, lining, etc. While blending with other fatliquors, better results may be achieved if Popoil PVG 9 and all other fatliquors in required proportions are first mixed together and then gradually diluted with water to form a fine emulaion.StorageStorage should be away from extreme conditions wherever possible. It is always advantageous to stirr well before.
...more
Popmag
25 - 30 Per kg
An improved self basifying agent for chrome tannages with pronounced masking effect.Physical AppearanceA fine creamish white powder which is a combination of special compounds with special masking agents having 90% active contents.Applications POPMAG is very fine, alkaline powder which is sparingly soluble in acid solutions. It offers a very safe method for controlling the basicity of chrome tannage. POPTMAG is added soon after chrome gets penetrated. It is to be added as powder in one feed. It ensures obtaining uniform tannage, colour and pH. An addition of 0.5-0.6% Poptan BFN on pelt weight is sufficient for normal pickle-chrome tan process. Advantages POPMAG produces a gradual increase in pH without the initial rapid rise normally encountered with common alkalis used for basification. Its use leads to even chrome distribution throughout the cross-section of the leather. POPMAG gives efficient chrome exhaust and ensures brighter colour and uniformity from batch to batch. POPMAG reacts with sulphuric acid to give only soluble salts. Alkalis based on calcium when used lead to formation of insoluble calcium sulphate in the pelt, which has a detrimental effect on the dyeing and can result in white stains on dyed leather. POPMAG ensures uniform pH level throughout the cross section of leather because of the addition of masking agents and requires no extra time or quantity in case of extra thick guage leather for deriving the required pH level and boil test.
...more
Popfill PB Powder
A specialty protein filler developed for use on white leathers, "Corrected grains" will show improved buffing properties in addition to the value of increased "filling" of "flank" and belly areas.Specifications CONCENTRATION : 96-98% PH ( 1:10% soln.) : 6.5 - 6.8 ApplicationNormal application 3-5% based on the chrome-shaved weight added directly to tanning drum for 10 minutes prior to fatliquor.
...more
Popdelimer Dl
60 - 80 Per kg
500 kg (MOQ)
We are offering popdelimer dl deliming agent chemical composition : blend of organic and inorganic salts. Appearance : coarse-grained powder ph of 1:10 soln. : 2.0 – 2.5 properties : popdelimer dl is a granular white to yellowish powder which dissolves slowly, so no acid swelling must be feared. Popdelimer dl acts quickly and very light and smooth pelts are obtained. Popdelimer dl gives an even deliming effect and completely removes the lime and activates chrome-exhaustion during tanning. applications: popdelimer dl is added undiluted and may be used in normal floats. Depending on the thickness and lime content of the pelts, 0.5 – 1.5% of popdelimer dl can be used. shelf life: upto 1 years at temperatures between 5 and 40 0c and dry conditions.
...more
Popdegreasor DGI Liquid
POPDEGREASOR DGI LIQUID is a solvent-based water miscible Degreasing agnet based on a special combination of solvent and nonionic emulsifiers.POPDEGREASOR DGI LIQUID is ideally suitable for degreasing all Types of leathers. Skins and hides with excessive fat content can be effectively degreased to produce better quality finished leathers. It redistributes the natural fat to achieve more level dyeing in uppers and Improved nap in suedes . Details Appearance : Transparent , pale yellow liquid. Chemical Nature : Solvent containing small amount of anionic emulsifiere Reaction : Neutral pH of 10% solution : 7.0-7.5 Stability : Stable to acids, alkalis and salts Application When used in the degreasing of bated hides and skins, Popdegreasor DGI Liquid removes excess aftty matter and also improves the dispersion of natural fat present. This prevents chrome soap formations during chrome tannage . 0.25%-1.5% is recommended during this stage depending on the type pf raw material used. Popdegreasor DGI Liquid is suitable for the degreasing of E.I. skins for the manufacture of semichrome grain and suede leathers. 2.0%-4.0% can be used alongwith 1% sodium bicarbonate in the stripping bath. For the degreasing of chrome split leathers for the manufacture of suede leather, 2.0%-4.0% of Popdegreasor DGI Liquid is recommended on shaved weight. Popdegreasor DGI Liquid can be also used for the degreasing of bated skins for vegetable tannage. Popdegreasor DGI Liquid is especially effective if degreasing is carried out under low float conditions . The pelts/leather can be run for about 30 to 40 minutes in low float conditions and the drum can be subsequently flooded with warm water and run for about 20 minutes. StorageVery good under normal storage conditions . After use, the lid of the container is to be closed air tight.
...more
Popbate ALK
23 - 30 Per kg
POPBATE-ALK is an enzymatic bating agent which works in alkaline range. POPBATE-ALK is a versatile bating agent based on proteolytic enzymes for all types of leather. This is an optimal blend of proteolytic enzymes from animal and microbial sources. The tailor-made formulation has also lipolytic side activities which help in removing the fatty tissues adhering to the skin and thus facilitating an optimum bating action.Advantages POPBATE-ALK ensures efficient loosening of scud consisting of short hairs, grease, lime soaps, dark coloured pigments and traces of epidermis, resulting in a fine and silky grained leather. POPBATE-ALK has proteolytic enzymes which ensure optimal removal of non-leather forming proteinaceous material like albumin, globulins and mucoids from the hides and skins. POPBATE-ALK gives a more elastic grain without increasing the "loose grain" tendency. POPBATE ALK slackens the hide structure gently without causing excessive decomposition of the flanks. POPBATE-ALK Good scud loosening, smooth grains, even in strongly "fallen" pelts. For improved scud loosening special auxiliary agents may be additionally used. Specifications Appearance : Off white to pale brown, free flowing powder Opt. pH : 8.5 - 9.5 Opt.Temperature : 35°C- 45° C Activity : 1,500 LVU / GM ApplicationIt is to be dosed at 0.4-0.8% based on the pelt weight. It is better to dissolve the formulations made with POPBATE-ALK separately in little quantity of water before adding to the bating bath.Packing & Shelf LifePOPBATE-ALK is available in 25 Kgs. Gunny bag packing and can be stored upto 6 months in a cool and dry place.
...more
Popbate Ac
23 - 30 Per kg
POPBATE-AC is an enzymatic bating agent which works in acidic range. POPBATE-AC is a versatile bating agent based on proteolytic enzymes for all types of leather. This is an optimal blend of proteolytic enzymes from animal and microbial sources. The tailor made formulation has lipolytic side activity which will help in removing the fatty tissues adhering to the skin and thus facilitating an optimum bating action.Advantages POPBATE AC is a bating agent for use between pH 3.5-4.5. It serves for bating of limed and pickled pelts as well as enzymatic slackening of wet blues and vegetable synthetic crust leather. Use of POPBATE-AC yields following effects : Preserves the, liide substance and gives the leather a very tight grain. Maintains substance even in areas such as flanks. Improves the feel, the uniformity of colour and firmness of grain. Good scud loosening, smooth grain strongly fallen pelts. Auxiliary agents may be used for further improvements in scud loosening. Specifications Appearance : Off white to pale brown, free flowing powder Opt. pH : 3.5 - 4.5 Opt.Temperature : 35°C - 40° C Activity : 1,500 LVU/GM ApplicationIt is to be dosed at 0.4-0.8% of the pelt weight. POPBATE-AC shows maximum activity at pH between of 3.5-4.5. The pH should be constantly maintained during bating and formic acid diluted 1:10 should be added if the pH rises above 4.5Packing & Shelf LifePOPBATE-AC is available in 25kg gunny bag packing and can be stored upto 6 months in a cool and dry place.
...more
POP Quebracho ATO Powder
80 - 90 Per kg
QUEBRACHO POWDER is a powder product obtained by chemicallly treating natural quebracho extract in order to achieve full cold water solubility and containing the largest tannin percentage among vegetable extracts. It is normal spray-dried extract. It is excellent for drum tannage and also for the retannage of chrome leather.Typical Analysis Physical Aspect : Light reddish brown hygroscopic powder. PCP : Free Tannins % : 72% + 1.0 Non Tannins % : 20.0%+ 2.0 Moisture : 8.0% maximum pH ( 1:10 soln.) : 4.7-5.3 Ash % : 6.8%+0.5 PropertiesPopquebracho ATO Powder is fully soluble in cold water. It has the following characteristics for vegetable tannage : High tannin content. Quick penetration at natural pH. Excellent tanning properties. Uniform quality. Not dusty. Non astringent. Good weight yield. Full compatibility with vegetable tans and syntans. It is particularly suitable for vegetable tanning of all kinds of leather, as well as for combined tanning and chrome leather retannage.For retannage of chrome leather Popquebracho ATO Powder permits Better buffing properties. Excellent polish effect. Bellies and flanks fillings. To keep embossing effect. ApplicationsPopquebracho ATO Powder may be used alone or blended with other vegetable extracts. The following use is recommended :Based On Limed Weight 25-30% of Popquebracho ATO Powder for vachetta tannage ( veg. Leather ). 40% of Popquebracho ATO Powder for soles tannage. Based On Shaved Weight3-18% of Popquebracho ATO Powder for chrome leather retannage.Recommendations During the leather production, there may be a risk of iron contamination. In order to prevent this, we suggest to use an iron sequestering agent such as Pop DS Powder ( 0.2% on the reference weight), which may be added together with the first addition of tanning agents on the tanning or retanning processes. Powder extract dissolution should be performed by means of mechanical shaking. If done manually, it is advisable to work by dissolving the contents of each bag. The use of water at 35C facilities dissolution and prevents lump formation. Using small amounts of sodium metabisulfite and formic acid in tanning liquors and processes lightens the colour and improves the appearance of the end-products. StoragePopquebracho ATO Powder maintains its characteristics unchanged if properly stored in dry premises protected from sunlight in closed bags.PackingPopquebracho ATO Powder is presented in powder form, dedusted, and packed in 25 Kgs. fine HDPE bag nett weight.
...more
POP Myrab Extract
45 - 50 Per kg
POPMYRAB POWDER is vegetable extract powder and is hydrolysable tanning material with high in acidity and less salt. It gives mellowing effect and promotes the fixation of condensed type tannins. If blended with catechol tannins it imparts light colour, fullness plumpness and firmness to leather.Typical Analysis Appearance : Light Yellowish Powder Tannins : 56.35% Non-Tannins : 12.7% Moisture : 5.0% pH (1:10 soln.) : 4-4.5 Application It is particularly suitable for making sole leather when blended with POP GS MIMOSA. It is used in pit and drum processing in the manufacturing of E.I.Kips, buff calf and hide skins. It is useful for retanning particularly shrunken grain upper leathers.
...more
POP Mimosa SS
80 - 90 Per kg
POP MIMOSA SS is a soft mimosa single bleached extract of high quality indicated for tannage of hides and skins whenever a very light colour is required. In the tannage of soles and vachettas a very nice beige tone, often desired, is acheived.Typical Analysis Physical Aspect : Light beige hygroscopic powder, dedusted. Ionic Character : Anionic PCP : Free Tannins % : 75.0 + 1.0 Non-Tannins % : 20% Insolubles : 0.5% Moisture % : 4.0% Mineral Ash : 0.4% Fe (Iron) : 0.00025 ppm Cu (Copper) : Nil pH (1:10 soln.) : 4.0 4.5 PropertiesPOP MIMOSA SS is soluble in tap and hot water, with the following characteristics on vegetable tannage : Fast and efficient penetration. Excellent yield. Very light colour leathers Good fixation Nice beige tone For Chrome Leather Tannage Pop Mimosa Ss Permits Bellies and flanks fillings. Better buffing properties. Excellent polish effect. To keep the embossing effect. ApplicationPOP MIMOSA SS may be used alone or blended with other vegetable extracts. The following use is recommended : Based on limed weight q 25-30% for vachetta tannage (veg leather) q 40-45% for sole tannage. Based on shaved weight q 5-15% for chrome leather tannage. Types of Manufacture Flexible and semi firm leather. Tanning and Re-tanning of chrome box-cow. Harness and calf leather. East Indian leather. RecommendationDuring the leather production, there may be a risk of iron contamination. In order to prevent this, we suggest to use an iron-sequestering agent such as Pop DS Powder (0.2% on the reference weight), which may be added together with the first addition of tanning agents on the tanning or retanning processes.StoragePOP MIMOSA SS maintains its characteristics unchanged if properly stored in dry premises protected from sunlight in closed bags.PackingPOP MIMOSA SS is presented in a powder form, dedusted, and packed in a 25Kg. bag net weight.
...more
POP GS Mimosa
65 - 75 Per kg
Pop GS Powder is a mixture of mimosa medium bleach extract and wattle extract which is suitable to any kind of vegetable leather. It is excellent for pit-drum or drum tannage and also for the retannage of chrome leather.Typical Analysis Physical Aspect : Light brown hygroscopic powder Ionic character : Anionic PCP : Free Tannins % : 70.0 _+ 2.0 (72.5 _+ 2.0 dry basis ) Moisture % : 6.5 maximum pH ( 1:10 soln. ) : 4.5-5.0 PropertiesPop GS Powder is soluble in tap and hot water. It has the following characteristics for vegetable tannage : Efficient penetration. o Excellent yield. Good fixation. For retannage of chrome leather Pop GS Powder permits : o Bellies and flanks fillings. Better buffing properties. o To keep embossing effect. o Excellent polish effect. ApplicationPop GS Powder may be used alone or blended with other vegetable extracts. The following use is recommended : Based on limed weight 25-30% of Pop G8 Powder for vachetta tannage ( veg leather ) 0 40 - 45% of Pop G8 Powder for soles tannage. Based on shaved weight 0 5-15% of Pop GS Powder for chrome leather retannage. RecommendationDuring the leather production, there may be a risk of iron contamination. In order to prevent this, we suggest to use an iron-sequestering agent such as Pop DS Powder (0.2% on the reference weight), which may be added together with the first addition of tanning agents on the tanning or retaining processes.StoragePop GS Powder maintains its characteristics unchanged if properly stored in dry premises protected from sunlight in closed bags.PackingPop GS Powder is presented in a powder form, dedusted, and packed in a 25 kgs jute bag net weight.
...more
POP Chestnut KPS Powder
85 - 90 Per kg
Typical Analysis Physical aspect : Dark brown hygroscopic powder dedusted Ionic character : Anionic PcP : Free Tannins % : Minimum 74.0 Moisture % : 4.5 - 6.5 pH (1:10 solution ) : 4.5 - 5.0 PropertiesPOPCHESTNUT KPS POWDER is soluble in tap and hot water It has the following characteristics for vegetable tannage Firmness and excellent fibre compactation Exceptional fixation power Uniform and efficient penetration Excellent weight Yield More fullness Fine , Tight and smooth leather grain. POPCHESTNUT KPS POWDER is also suitable for leather retannage that promotes the following advantages Improved Hydrophobic features. Keep good printing and embossing effect. Better buffing properties . Excellent polish and burnish effect.
...more
KOREAN SKIN CREAMS
We are indenting agents who can help you to import skin care creams from korea.
...more
Reviews & Ratings
Write a ReviewOpening Hours
Share your Correspondence Details to receive messages from Poplon Chemie
Post Free Ad
