Printing Machinery Dealers in Focal Point, Amritsar

Attachment of hot foil unit is available with multiple Foil Rollers options (Single Pull / Double Pull / Triple Pull / Four Pull)   Heating Plate Multiple Chambers heating plate having separate compartments with separate circuit on control panel to operate any or all the compartment at the same time. It plays key role in minimising wastage of electricity. Aluminum Plate is affixed on the Heating plate to provide best quality foil Impression. Heating plate is fitted with digitally displaced machine with thermostatically heaters.   Re-winder Unit : Re winder units are separate for each foils.   Jumpers : Jumpers are designed with advanced technology to minimize wastage of foils.

• Voltage: 220V, 380V
• Driven Type: Electric
• Frequency: 50-60 Hz
• Automatic Grade: Semi Automatic
• Features: Less Maintenance, Long Working Life
• Application: Die Punching

Feature Attachment with hot plate Programmable stepper  motor with stainless plate With single, double, tripple pulling and on requirement bigger sizes also available

• Size (Inches): 50 x 60, 52 x 72

This machine is suitable for printing of paper and board .It is water based ink technology for instant drying. This sheet can be used immediately alter printing for further processing. It is single color sheet printer is also available.

FEATURES High speed feeding, printing, slotting, die cutting and stacking 5 components in one machine. PLC controls Spray type lubrication Pneumatic inking Electric type slotting unit (Full movement)

• Floor Space: 52x68Inch

Leaf printing machine is designed for Cutting, Creasing, Embossing and Hot Foil Printing on Paper, Duplex Board, Paper Corrugated Sheets, Fibreglass sheets, Vinyl, Foam Rubber, Felt, Gaskets, Wood Veneers, Leather, Sponge Rubber, Cork, Plastics, Polythene, Linoleum & PVC Sheets, etc. Digital counter on the Operating Penal for counting impressions made by the machine.

• Weight: 800 Kg
• Material: Mild Steel
• Max Printing Length: 500-1000 (mm)
• Machine Type: Semi-Automatic
• Maximum Cutting Speed: 50 -100 mm/sec
• Thickness: 5-7 mm

• Features: Easy to operate, Low maintenance, Hassle free performance

'Dwell timing device' can set timing of the moving platen from 0.5 to 10 seconds. At dwell option, the moving platen remains stationary in an open position for the set dwell time before resuming motion. This is very useful feature when largedifficult jobs are being fed or when fine registration of Die in a job is required. This feature minimizes wastage in jobs. 'Electromagnetic clutch & brake' enables push button control of the machine for easy and efficient operation. The advanced electromagnetic clutch & brake do not require lubrication.

• Brand Name: STAR
• Weight: 3000 KG
• Model Name/Number: FLEXO527
• Usage/Application: Paper
• Color Output: YES
• Material: Iron
• Number Of Colors: 2
• Max Printing Length: 500-1000 (mm)
• Machine Type: Semi-Automatic
• Color Printing: Color Printing
• Maximum Cutting Speed: 50 -100 mm/sec
• Printing Width: 52
• Automation Grade: SEMI AUTO
• Thickness: 70 GSM

• Brand Name: Royal
• Weight: 300kg
• Voltage: 220V/380V
• Warranty: 1 Year
• Dimension: 1700*700*1820

Description : Designed for wedding Card Golden Printing of Title with heat. The machine can not be attached with any other machine. Size Available : 4" x 6" 5" x 7" 6"x 9" Features : High functionality Long working life Easy to operate

• Type: Automatic
• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 380V
• Power: 1-3kw
• Driven Type: Hydraulic
• Feature: High Performance, Low Power Consume, Rust Proof
• Warranty: 1 Year
• After-Sales Service Provided: Spare Parts

Our company is counted amongst the forefront Multi Color Printing Slotting Machine Manufacturers in India. The Multicolor Printing Machine & Slotting Machine is widely demanded in the market as no alternative is available in terms of quality and performance. Additionally, the latest features of the Automatic Multicolor Printing Machine ensure easy operation and low maintenance cost. Specification : This machine can constitute the double—color, 3—color, 4—color and 5—color printing & slotting machines which can simultaneously accomplish the process of printing, separate cutting, creasing, slotting and corner cutting.   Function of the Printing Part : The drive part of the printing part adopts the big screw and bevel gear drive which increases the strength of the gears and the driving stability under the circumstance of lowering the noise. With 45 for ging—works and quench treatment the drive gears have increased the durability and life, and greatly guaranteed the precision of chromtograthing.The paper—feeding of the drive part of the printing part adopts cross sliding drive. The gears of the print pressing roller and the paper—catching roller adopt the planetary rocker—plate drive device. The gears are normally meshed from beginning to end while the space between the print pressing and the paper catching is adjusted, which does not enlarge the space between the gear—top and gear—side, make the color process (esp. the multicolor process) more accurate and lower the wear between the gears to the minimum.The phase part adopts 360 adjusting while stop working or during warking. The scale will display this two kinds of adjustment which are different from the current phase adjusting, i.e. the driving and jointing part of the large gear adopts 2 bearings to support and joint, which has prevented the sleeve joint of the current gear and the inside—gear—circle from the ends—and—surface moving up and down, easy to lock, short service life and other defects, And the adjusting part adopts the planetary, worn wheel and warn driving method, which has greatly enlarged the drive moment and raised the accuracy of adjusting. Function of Inking Part : The ink distributing of the inking part adopts the rubber roller and the anilox roller inking. The linear velocity has been improved according to the variety of the printing situations of the clients. The thickness of the roller diameter of the anilox roller and the rubber roller has bees increased which has made the rotating speed rate more reasonable, and added the stability of ink distributing during operation and the rigidity of the axle. The drive has also bees improved, i.e. changed to direct drive free the original indirect anilox roller drive. Under the circumstance of the space between the anilox rollers can be free adjusted, there is no space between the gears of the anilox rollers, which makes the linear velocity of the anilox roller and the plate roller keeping consistent from beginning to end, and makes the repeated trace of ink accumulating, inking and the clarity greatly improved. Function of Slotting Part : The slotting part adapts the method of the first slotting and then creasing which is convenient to adjust The moving gear of the knife disk of slotting is inside—install—type which is convenient to operate.

• Type: Manual
• Condition: New
• Brand Name: NB

We provide Leaf Golden Silver Foil Printing Machine which is useful for the foil stamping on visiting, invitation, wedding, shagun, reception cards, diaries, leather, wallets, stickers, stationery products like books, notebooks, catalogs, broachers and other related articles. This machine prints with the help of heat transfer. The Leaf Golden Silver Foil Printing Machine is useful for foil printing. The table is moveable for easily placing and taking printing product. On the top side of machine, a heaing chase is fixed. Machine also contains mechanical auto feed attachment which is used for rewinding foil roll. Hand lever is useful for head movement up and down. The machine runs very smoothly; long time running and easy to perform.

SPECIFICATIONS   New design of macking & eletricity into the whole. With beautiful out look, fixed structure, high auto level. With heigh precision of precess printing, the error chromatic printing is little & easy operation. Sepation by electricity & slotting phase with 3600 phase with hand adjustment & no shut down. Auto lubrication of the areas with oil. Four knives adjustment, with length, with adjustment upper & lower knife stand, pressing line, cutting knife ruler, pressing paper pole which have united movement by hand, saving order changing time.

• Material: Mild Steel
• Finishing: Coated
• Machine Weight: 100-200kg
• Automatic Grade: Semi Automatic
• Packaging Type: Wodden Box
• Cutting Capacity: 100mm
• Overall Length: 6-10 Inch
• Usage: Metal Cutting, Laser Cutting
• Hot Plate Size: 15x20 Inch, 18x23 Inch, 20x30 Inch, 28x40 Inch

• Weight: 100-500kg
• Color: Blue
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-5kw
• Driven Type: Electric
• Warrenty: 1 Year
• Dimension: 1700*700*1820

Feel free to place the order for the Leaf Printing Machine that are sturdy, efficient and have a long working life. These Leaf Printing Machines are designed at our state-of-the-art facility using the damage-resistant materials and pioneering technology. Global clients can avail them from us in the customized specifications also. As a reputed Leaf Printing Machine Manufacturer, Supplier and Exporter from Amritsar, we assure the best price deals and timely supplies.

• Driven Type: Electric
• Color: Blue
• Condition: New
• Automatic Grade: Semi Automatic
• Power: 3-6kw
• Certification: ISO 9001:2008
• Voltage: 220V
• Type: Single Color Flexo Printing Machine
• Weight: 1000-2000kg
• Warranty: 1year
• Country of Origin: India

• Weight: 100-1000kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-5kw
• Driven Type: Electric
• Warranty: 1year

We stringently follow automated warehousing system that helps us in meeting the safe storage requirements. Thus, we ensure zero damage to the products till the final dispatch. Only premium packaging material has been used for the safe packing of our products which ensures that only defect-free range is delivered at buyer's end. Adequate packaging assures the safe transit and flawless delivery.

This high speed printing and packaging machines retained basic design and simple operation. All lubrication parts are served by centralized.