Rotary Die Cutting Machine Dealers in Focal Point, Amritsar

Function and Uses The machine adopts chain feeding system and double roller rotary type. It can perform all process of slitting, creasing , corner cutting and hit special whole at one time. It has advantage of high precision, easy to operate, long service life and low cost. Paper Feeding Unit Adopt lead edge feeding system with vacuum adsorption auxiliary feed, (optional equipment kick feeding system) Speed: 10000 Sheets/Hr, die-cutting precision: ±0.75mm. Manual adjust former block board and computer control lateral block board, dial indicator. Leading paper roll have groove glue surface to prevent the crushed card board and increase the accuracy of feeding.   Main Characteristics The drum made of high quality steel tube, thickness 30mm, do balance treatment, plated chrome. Full machine gear made of 45# steel have been quenched treatment, Adopts lock-alx key less and cross-head system connect with shafts fi nish no gap adjustment. Driving part uses pull pump to lubricating (motorized phase adjustment type used spray lubricating). Oil box made of thick iron plate to avoid oil leakage. Phase adjustment by manual operate with micro-adjustment (or motorized adjust in 360º) Die Roller (bottom roller) lift-down adopts pneumatic control, manual or automatic operation. Rubber roller (top roller be wrapped anvil cover from “Maxdura” Brand from Taiwan (or CUE, DAY option), long use life. Rubber roller (top roller) can move automatically, move range ±40mm. Rubber roller (top roller) fix overrunning clutch to compensate line speed automatically, and avoid one position cutting. Equipped with anvil cover repair device, prolong use life.

Printing Machines also available with Rotary Die Cutting options. It can be attached with a slotting head on Rotary cylinder as well as an independent slitter scorer unit.

The Automatic Rotary Die Cutting Machine adopts double roller moving rolling pressing type, to make low, middle, high corrugated paperboard once to finish slicing line, slicing corner, rolling the line pressing trace, hitting hole, hitting button orders and so on. Automatic Rotary Die Cutting Machine espouses vacuum absorption and help carrying paper. The speed of the Automatic Rotary Die Cutting Machine is controlled electromagnetically. The Automatic Rotary Die Cutting Machine comes with 360° up and down adjustment. The Automatic Rotary Die Cutting Machine is available in chain feeding, suctions feeding and lead edge feeding models depending on speed requirements.

Rotary Die Cutting Machine, automatic paper cutting machines

Die cutter phase is adjusted by computer and electric digital control In a scope of 360°, Die Cutter horizontal movement is adjusted by computer and electric digital control of a scope of ± 5mm. Uniflair glue die cutting cushion roller servo traces simultaneously, when the restored roller is input inside the serveo computer system, it will calculate accurately and automatically and follow the printing speed to ensure the velocity of blade line the same as the cushion roller and make the formation of the die cutting beautiful and same in size. No matter how the diameter of the cushion changes, the die cutting plate will not be damaged. The upper and lower roller of the die cutting adopts the design of different sizes.

All transmission gears are made of high quality alloy steel (40Cr) grinded under high temperature with hardness > HRC42, Spraying circulation is adopted to lubricate the gears, reduce noise and prolong the service life. Anvil roller and mould roller adopts high-grade steel with fine reground and chrome plated surface. Balance correction enhances running stability Mould roller and anvil roller can be apart / released by the air cylinder eccentric mechanism during non-working condition in order to decrease the load of the machine and to prolong the life of the cutting mould and urethane rubber. Pneumatic lifting device working synchronous with the feeding system (During the feeding operation the mould roller pressed and when the feeding stops the mould roller released to ensure the correct die-cutting of every paperboard)  Mechanical drive anvil roller transverse moves within 60mm and installed with radial differential device to spread wear evenly (every cutting at different position) and to improve the life of anvil roller lx407 No matter how vary the diameter of anvil roller, unique speed difference compensation device makes the anvil roller slide together with mould roller so that the surface speed of anvil roller complies with it of the mould .roller, to make a perfect, uniformed die cutting. slotting machine could be made in good quality. Imported urethane (rubber) cover and its correction device to prolong the working life 3 to 4 corrections, 1 1.5mm each correction Planetary gear phasing structure, 360 degree motorized adjustment (run, brake, forward & backward)

• Max. printing speed: 60 Sheets/ min.
• Economy printing speed: 40 sheets/ min.
• Max. paper print area: 1400×200 / 1400×2200 / 1400x2400mm
• Min. paper coverage area: 380(full block print) x500mm.
• Effective print area: 1400×1800 / 1400×2000 / 1400x2200mm
• Adapted paper board: three layers, five layers, seven layers.
• Chromatography Precision: <=+-0.65mm
• Slot precision: <=+-1.0mm
• Power: 7.5 Kw
• Weight: 7500 Kgs/ 8500 Kgs/ 9000Kgs

Die-cutting roller is the high quality steel materials, 30mm thickness, balance correction, hard-chrome plating. Wallboard is high-quality cast iron material, 50mm thickness, and large processing center production. Soft-roll automatic grinding institutions improve rubber sleeve to pouches repeat usage and can grinding 3-4 times. Line speed automatic compensation to ensure that each batch of cardboard boxes full of die-size line The rubber is CUE polyurethane from America, easy to install and can die-cutting 12millon times. Mechanical soft roll about 40 mm lateral movement, the pads wear uniform. Six level grinding gears used 40cr material, low noise, long life. Die-cutting roller cylinder automatic separation devices to reduce rubber wear.

Rotary Die Cutting with Printer, Platen Punching Machine, Lamination Machines

Rotary Die Cutter, Sheet Pressing Machine, Flexo Printing Machine

Rotary Die Cutting Machine, Corrugated Board, Die Cutting Machine

Rotary Die Cutting Machine, Auto Stacker Machine