Aluminium Paints Dealers in Anand

This coating can be applied where dry heat resistance up to 600º c is required. Areas like chimneys, ovens, stack, exteriors of boilers etc. Can be coated with this paint.

The company is a well-known Manufacturer and Supplier of Karate Aluminium Paints. The Karate Aluminium Paints, offered by the company, are known for their cost-effective pricing as well as excellent quality. The Karate Aluminium Paints are one of the most effective paints when it comes to the withstanding of the corrosion that occurs in mild steel. The Karate Aluminium Paints are heat and light reflective paints with a wide demand. Scope : Aluminium paint is the most cost-effective coating to withstand corrosion of mild steel. Besides, it is heat and light reflective whereby, the ambient temperature under a roof coated therewith, is lower by 5-7oc. To get the best effect of shiny aluminium, use must be made of fine leafing aluminium paste. Also, the medium used must have the lowest viscosity with highest possible solids and lowest acid value. This is necessary for getting the best leafing value, which provides long lasting brightness.   Karate aluminium paint is made with all the above said characteristics. It is dual pack : medium in a bigger tin and paste into a smaller container. For the sake of convenience, the smaller pack is soldered to the lid of the larger can and the paste can be easily mixed into the medium can. It is necessary to have dual package because the leafing value of aluminium gets lowered if the medium andpaste (aluminium) are combined into one pack.   Areas of Application : All mild steel articles, which need water resistance, can be coated with karate aluminium paint. It can be brushed as well as sprayed. It can safely be used for inside/outside coating of potable water tanks. It is also excellent forcoating mild steel roofing sheets, under which the temperature will be lower by 5-7oc against outer temperature. Surface Preparation : See the pamphlet on surface preparation of metals.   Directions for Use : Prepare the surface as directed earlier. Mix medium and paste thoroughly. Dot not use high-speed mixer because under shear, aluminium flakes loose their leafing capacity. Do not use any thinner because the medium is pretty thin and does not need any further thinning when mixed with paste. Start brushing or spraying.   Notes : If possible, use the mixed paint within 48 hours. Storage for a longer time reduces leafing value and the full brightness gets reduced to some extent.

aluminium metal, brass metal, copper metal, hdpe granule scrap, HDPE Scrap