FPC Solar Water Heater Dealers in Anand

• Absorber Material: Electro grade copper with 99.9%
• Absorber Coating: Selective black chrome electroplated, to withstand 300 degree centigrade.
• Raiser: 12.5mm +/- 0.5 mm Copper tubes
• Header: 25.4mm +/- 0.5 mm Copper tubes
• Bonding - Header & Raiser: copper brazing
• Bonding - Fin & Raiser Tube: Ultrasonic welding
• Back insulatio: Rock wool/Mineral wool/Fiber glass wool with 48 Kg/cu. mt. density
• Side insulation: PUF with 25mm thick, 38 Kg/cu. mt. density
• Collector box: Aluminum extruded channel with P.P.Coating
• Collector bottom sheet: Aluminum sheet, 0.71+/-0.08 mm thick
• Collector stand: M.S Structure with P.P.coating
• Glazing: Toughened glass, 4mm thick with low iron, Transmissivity >87%@near normal incidence
• Retainer angle for Glass: Extruded aluminum angle with Polyester Powder coating
• Beading for glass: EPDM rubber
• Absorber area: 2 Sq.mt+/-0.1sq.mt/collector
• Heat transfer media: Water
• Collector area: 2.132 sq.mt
• Number of Fins/Collector: 9 nos. FRUL = 3.64 W/m² °C
• Dimension of collector: f

With toughened 4mm thick glass, aluminum frame and rubber insulation our innovatively engineered FPC Solar Water Heater can be purchased from us in bulk. As manufacturers and suppliers from Anand, Gujarat, we conduct various quality checks on our product to ensure safety and flawlessness. Our FPC Solar Water Heaters are recommended for both residential and commercial use. Our product makes absolutely no noise, is energy efficient, extremely compact and displays excellent performance during winters and cloudy weather.

Normally non pressurised systems are working up to 0.8 Kg / Cm2 , The storage tank is placed at a certain height relative to the top of the collector to prevent the reverse circulation during off-sun shine hours. In this system, hot water storage tank can be under normal pressure of cold water overhead tank so gravitational force of overhead cold water tank comes to bottom of hot water tank at normal pressure ( non pressurized), hot water comes out from top of hot water solar tank and release at the end of tap as a regular.  Brand Eurosolar Overall size** 2030 mm x 1090 mm x 95 mm No. of fins per collector 9 Absorber area 2.06 sq. M Absorber coating Eurosolar Solar selective coating on copper (black chrome on copper with or without nickel undercoat) Absorptivity 0.92 – 0.96 Emissivity 0.10 - 0.15 Temperature tolerance of coating More than 200 deg. C Absorber sheet (Copper) 0.12 mm thick x 1900mm L x 115mm W Riser (Copper tube) O. D. 12.7mm x 0.5 mm thick x 1922mm L Bonding between riser tube and absorber Ultrasonic welding Bonding between riser tube and header Copper brazing Riser tube protrusion inside header Max. 3 mm Hydraulic Test pressure 5 Kg/ sq. cm. Rated pressure 2.5 Kg/ sq. cm. End connections Brass flared Flanges Collector box Specially Extruded Aluminum sections Box Corner joints G. I. screws Box-back sheet joint Pop riveted Back sheet Aluminum sheet 0.45 mm thick Reflector Aluminum foil 0.02/ 0.05 mm thick Glazing Toughened & Tempered glass 4 mm thick - free from bubbles and scratches Transmittance > 0. 82 Sealing Silicone sealant Back Insulation Resin bonded Rockwool 50 mm thick.  R=1.67 sq. M deg. C/ W K = 0.052W/sq. M. k Side insulation Resin bonded Rockwool 25 mm thick Grommets & gaskets EPDM rubber Thermal performance FRUL =< 6 W/ sq. M deg. C  FR ( T& ) >= 0.65  

Solar FPC Water Heater, Outdoor Solar Light, Solar Chargers, Solar Geysers