Industrial Paint Dealers in Vitthal Udyognagar, Anand

Nitrocellulose paint is largely used as a relatively uncommon type of varnish and is most commonly used in applications where it is required to give a timber finish, such as in the case of musical instruments (like guitars and saxophones). It is also used as car paint in the automobile industry, or for painting of some aircraft components. Further, nitrocellulose lacquer is used in the manufacturing of specific type of phonograph records (called acetate discs), by coating the lacquer onto aluminum or glass disc and then a cutting a groove, which may then be used as masters or in dance clubs. It is based on nitrocellulose resin. It has good adhesion on steel.. It can be used for industrial applications on steel etc. especially for heavy machinery like cranes etc It is fast drying and has a glossy look. Also used on wood under certain conditions.

• Type: Epoxy Thinner
• Material: Epoxy
• Purity: 99%
• Feature: Dry Cleaning, Easily Washable, Eco-Friendly, Good Look, Good Quality, Impeccable Finish, Quick-Dry
• State: Liquid
• Country of Origin: India

pre dispersed pigments, predispersed pigments, special effect masterbatch

• Brand Name: Leon
• State: Liquid
• Raw Material: Acrylic
• Application: Interior
• Application: Roller
• Packaging Size: 20 L also Available in 10l,4l,1l

Epoxy Paints, photovoltaic paints, Primer Paints, synthetic paints

Acrylic Distemper Paint, Emulsion Paints, acrylic paints, Decorative Paint

Fume Extractor, Heavy Steel Fabrication

Eco Friendly Wall Paint, concrete sealer

Paints, polymeric flocculants, Polyurethane

Varnishes, Resins, chemical paint, allied paint

Primer, Oil Paint, Synthetic Primer, synthetic putty, Interior Paint

The company has firmly established itself as a Manufacturer and Supplier of Rosalee NC Putty. The Rosalee NC Putty is best available option in the market for the filling and repairing of the dented mild steel surfaces. The Rosalee NC Putty provides quick drying and is available at the market leading prices. Scope : Any surface, which is dented, needs filling up. The best ways to fill up such dents, three options are available : Use Synthetic Putty : dries late Use N.C. Putty : very quick drying Polyester Putty : Two Pack   The last option is the best dries very fast, can be sanded after 15-20 minutes only. But being a two-pack system, mixing the base and hardener is cumbersome, and it is the costliest. Obviously, the economic choice has to be Rosalee N.C. Putty.   It is made with gun cotton, alkyd, hard resin and plasticizer in combination with suitable extenders and solvents. Each ingredient has to be thoroughly checked to offer a smooth and free flowing paste, which can be easily applied with a putty knife. Besides, the painter should be able to wet sand within half-hour of application to get silk smooth finish. The right quality is Rosalee N.C Putty.   Areas of Application : Any mild steel surface, which is dented. Examples: mild steel sheets used for making steel furniture, any castiron article, which has to be made smooth, and all types of vehicles, which need repainting.   Surface Preparation : The article to be provided must be free from oil, grease and rust. The best way to achieve perfection is to sandblast or adopt 7-tank phosphate system. If for some reason, it is not possible, use rustosan, which removes oil/grease and rust in one operation. Besides, it gives a film of iron-zinc phosphate for better corrosion resistance.   Directions for Use : Prepare the surface as directed above. Take a small quantity of the paste on a putty spatula and start filling dents with semicircular motion of hand. Ensure that putty does not roll back. Since the putty contains about 40% of solvents, which go into air, dents will never get filled up in one operation. Minimum three coats of putty are needed to get a desired result. The putty can be applied wet on wet but it is recommended that a minimum time of half an hour be given between each coat so that pinholes do not develop. Start wet cutting using the finest paper and continue till a silky smooth surface is achieved.   Notes : After using the putty, close the lid of the container very tightly. Otherwise, drying will waste half the quantity.

Industrial Paint

Decorative Paints, Industrial Paints, Oil paintings, water color paintings

Paints

paint allied products, Industrial Paints, Decorative Paints, Paint

Industrial Paint, Decorative Paints

Paints, Wood Coating

Paints, chemical equipments, Synthetic Resin, high speed dispersers, Jars

Paints, varnishes products, Allied Products, Industrial Paints

Zinc Chromate Wall Primer

Paints, Cement, Allied Products

Paints, Oil Paint, TURPENTINE, Primer, Decorative Paints, Allied Products

Industrial Paint, Decorative Paint

Varnishes, Paints

Decorative Paints, Industrial Paints, Allied Products

Paints

Insulation Varnish, CS Industrial Valve, Stainless Steel Industrial Valve

Industrial Paint, Floor Cleaner, Dish Wash Liquid, Hand Wash

Specialty Paints, industrial decorative