Pneumatic Drills Dealers

• Model: BMT-25
• Pillar Dia. (mm): 90
• Spindle Nose: MT-3
• Spindle Travel (mm): 152
• Spindle Center To Pillar Surface (mm): 228

Parts Properly BalancedPrior Assembling of Main Gear & PullyParts finished on imported Grinding Mc.All Moving Parts Finished to Close Tolerance.Main Spindle & Pinon are Made out of EN Forged Steel.Spindle Ram is made out of Alloy Steel.

We are offering pneumatic drilling and tapping machine. Functions: • Suit for drilling, reaming, turning and tapping in quantity production at one time. • boring and facing one time. • threading as per a required sized taps. • Both the left and right of workbench adopt cylinder for minimal vibration. • Machine's slide is pneumatically operated. • Work holding device is pneumatically operated (uses cylinder)to hold the job for fast fixing. • Machine operated through a plc panel. • FRL is used for regulating the air and lubricant. • solenoid valve for controlling the pressure of slides for moving. • Manual oil injector, manually feeding oil before and after the processing can maintain the machine in good condition. • RED emergency button is given on the head cover or belt cover to stop all the operations in need or emergency. Advantages: • Increases the production efficiency by four to five times and reduce the manufacturing cost • Easy operations on the control panel. • It is capable of providing extra precision and finish with ease. • No skilled operator is required to operate the machine. • All sliding surfaces with lubrication device, ensuring high service life. • Easy maintenance due to all parts available. Applications: 1. Applicable for processing parts of large batch, one-off drilling and threading extending high efficiency. 2.Specially applicable for the rapid processing of the components used in the field of bathroom fittings or sanitawares manufacturing. 3.This machine can be applicable for the processing of the components used in the fields like automotive, tools, plumbing valves, hardware ,door locks etc.

• Weight: 2680 kg
• Hole range: 102-115 mm
• Hole Depth: 50 feet (15 mtrs)
• Compressor: 450 cfm/150 psi
• Pneumatic Drifter Drilling: 48-76 mm
• Mounting: Crawler
• Speed: 3.5 km/hr
• Rod length: 3 mtr
• Feed: Chain feed driven by air motor & gearbox
• Boom Lift above center Line: 45°up, 30° down
• Boom Swing: 45° right, 45° left
• Drill Guide Swing (Horizontal): 45° right, 45°left
• Drill Guide Tilt: 75°
• Overall length: 5,100 mm
• Overall Width: 2000 mm
• Height Tramming: 1780
• Ground Clearance: 254 mm

The basic materials that we use for the manufacturing of our entire range are thoroughly checked against numerous quality parameters. Thus, we make sure that we deliver faultless products to the clients. Our quality analysis system is headed by experienced quality auditors who check each and every product at different levels.

• Weight: 11.1 kg
• Length: 505 mm
• Hole range: 24 - 34 mm
• Hole depth: 3 meters
• Air pressure: 6 bar
• Air consumption: 24 l/s
• Blows per minute: 2580
• Revolutions: 220 rpm
• Piston dia: 45 mm
• Piston stroke: 40 mm
• Shank size - 8311 0102 95 (Hex): 22 x 108 mm

MH502AFR pneumatic rock drill, Sinker Drills robust design that makes them easy to handle in quarry-mine and general excavating work. The design also provides a main valve and cylinder porting concept that helps maintainconstant drilling speed throughout a long service life. Working parts are constantly protected with an effective lubrication system. Pneumatic rock drill in Industrial Breakers and Demolition Hammers.   Added feature is water flushing system for underground tunneling.   Benefits & Features   Forged steel housings withstand rugged use. Low weight High Torque Very reliable and resistant to wear Large sliding face Long stroke machine High impact energy Good penetration in hard and soft rock Low spare parts consumption Blower for deep hole cleaning Robust kick-latch type retainers

• No Load Speed: 1500
• Type: Impact Drill
• Material: Metal Body
• Max Drill Depth: 20-30 mm
• Max Hole Size: 10 mm
• Brand: BPT
• Air Inlet: 1/2"
• Weight: 3 KG

• Type: Pneumatic Drilling Machine
• Color: Black, Blue, Brown, Grey
• Voltage: 110V, 220V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-5kw, 10-15kw, 15-20kw, 20-25kw
• Driven Type: Penaumatic
• Warranty: 1year, 2years
• Certification: ISO 9001:2008
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg

• Type: Pneumatic
• Application: For Drilling And Mining
• Hole Diameter: 41-76 mm
• Impact Power: 7.2 KW
• Weight: 70 KG

BBC120F Drifter is a Pneumatic Rock Drill intended for use on drill rigs in the following areas Underground Mining - Long Hole Drilling Surface Quarrying - Bench Drilling Construction - Grout Hole Drilling Metallurgical Industry - Tap Hole Drilling in Blast Furnace A popular all-round machine, the BBC120F Drifter has earned a reputation of economy and reliability. The powerful BBC120F Drifter has a moderate weight and this facilitates manual handling of the unit which can be mounted on simple and light rigging structures. Assembled from components in a sectional system. The complete assembly can be easily dismantled for service and inspection of internal parts. All wear parts are easy to replace. Regular inspection will hold operating costs to minimum.Intended for operation with remote control, the rotation is reversible, a necessary feature for use with extension steel in long-hole drilling. The rotation mechanism can also be disengaged and the impact action used to rattle a tight joint or a jammed joint.

• Type: Portable
• Color: Black & Greay
• Voltage: 220 V
• Usage: Industrial
• Driven: Pneumatic
• Warranty: 1 Year

• Type: pneumatic
• Application: mining
• Color: black
• Operating Pressure: 7kg