Auditing Services

• ISO 17020 Accredited Inspection Agency: ISO 17025 Accredited Testing Laboratory

The occurrence of any fire has the potential to cause severe damage to both life and property. A Fire Safety Audit is the most effective tool for assessing the fire safety standards of your facility. It helps the owners to identify areas where improvement can be made and develop an action plan, in addition to emergency preparedness and mock drills. CDG fire & safety consultant are carrying out regular Fire Safety Audits for High Rise Buildings,Hotels,Banks,Small,Medium and Large Scale Industries and more Methodology Opening Meeting Study of Process Layout Availability of Fire Fighting System and its adequacy Fire prone areas Fire prone operation Study of all the fire alarm, Fire detection and fire suppression system. Closing Meetings Our team carries out fire safety audit as per IS Standards The main focus of these fire safety audits is: – Identification & control of ignition sources in areas where flammable chemicals are stored / handled / transferred. – Review of chemical compatibility in storage areas and to suggest appropriate fire loss control measures – Review of electrical hazard which are potential causes of fire – Review of fire detection measures adopted & to suggest suitable improvement measures – Review of the various active (fire hydrant, sprinkler, portable fire extinguishers) and passive fire protectionrequirements for chemical storage and handling areas and to suggest improvements as necessary – Review of Fire Alarm system and emergency fire system of plant – Review of contractor safety awareness (chemical spill, fire fighting, emergency communication, knowledge of plant hazards & safety regulations) and to recommend suitable improvement measures to  enhance contractor safety – Review of safety awareness and safety training requirements (training identification and efficacy) of employees with respect to hazards present. Fire safety inspections are a check of all fire safety procedures, installations and records within a building structure to determine compliance with appropriate legislation and regulation. A fire safety inspection helps to ensure that the owners and occupiers of buildings are meeting their responsibilities under the legislation, that buildings are fitted with correct fire safety installations required by the fire safety standard, and that these fire safety installations are maintained in an operational condition. Thus, building occupiers are required to ensure that all fire safety installations in their building are maintained in accordance with fire safety regulations / codes prevailed from time to time. The occupiers are also required to keep records of maintenance of their fire safety installations in the building. The fire safety inspection will involve an inspection of the building's fire safety installations and an inspection of the maintenance records for each of the fire safety installations in the building.Normally, the inspection checklist will be completed during the inspection of the property and the owner / occupier will receive, a copy of the completed checklist signed by the inspecting officer. If no problems are found to exit, the inspection is complete.

Auditing of the records of accounting in accordance with the provisions of the Statute to maintain a accurate and equitable representation of the accounting in conjunction with the specific legal situation in which the audit is undertaken. To order to maintain accurate and equal accounting of transactions and other claims of incorporation of all accounting under the Indian Company Act, the reports will be audited by the CA. The auditor shall track and evaluate each report in accordance with the provisions and legislation of the Company Act. Statutory is essential for assuring the reliability of company’s annual accounts of various stakeholders like debtors, creditors, bankers, shareholders and government.      The process of the statutory audits has become increasingly complicated recently. Statutory environment in cooperation with synchronization of various accounting parameters and the reliance of various stake holders on audited accounts have increased the questionability of statutory auditors. Our statutory auditing team consists if experienced professionals for effectively conducting the statutory auditing procedure. The team members remain acquainted with the latest changes in the statutory auditing arena for staying ahead in the loop. Our statutory audit department conducts audit by adhering to various global accounting and auditing standards for conducting fair and accurate audits for various stakeholders like government, bank, financial institution, general public and investors. You can contact us for enquiring more about the statutory audit services.

The Supplier Ethical Data Exchange, or Sedex for short, is a globally renowned online platform that allows members to provide customers and partners with detailed information about their social and ethical performance. The aim is to ensure greater transparency across the entire supply chain.The SMETA Audit Methodology :SMETA audits use the ETI Base Code, founded on the conventions of the International Labour Organization, as well as relevant local laws. SMETA audits can be conducted against two or four auditing pillars. The two pillars mandatory for any SMETA audit are Labor Standards and Health & Safety. The two additional pillars of a 4-pillar audit were introduced to further deepen the social responsibility aspect of SMETA audits.A SMETA 2-pillar audit comprises the following modules: Labor Standards Health and Safety Additional Elements : Management Systems Entitlement to Work Subcontracting and Homeworking Environmental assessment (shortened) A SMETA  4-pillar audit covers the above elements, plus: Environmental assessment (extended) Business Ethics

Tax Audit comes under the purview of Section 44AB of the Act which specifies the persons who are required to get audit of their books of accounts. This section specifies particularly that except for the persons coming under the purview of the sections mentioned in the text of Section 44AB , all other have to get their accounts audited under Section 44AB. The object of audit under section 44AB is only to assist the Assessing Officer in computing the total income of an assessee in accordance with different provisions of the Act.This Audit effectively curbs tax Evasion and ensure tax compliance.  Therefore, Even though the income of a person is below the taxable limit, he will have to get his accounts audited and if his turnover in business exceeds the prescribed limit. If Assessing Officer wants the assessee to get his accounts audited in cases where the figures of turnover as appearing in the books of account of the assessee do not exceed the prescribed limits, he has no option but to pass an order under section 142(2A) directing the assessee to get his accounts audited from a chartered accountant as may be nominated by the Commissioner of Income-tax or the Chief Commissioner of Income-tax Hence, it must also be understood that the issue whether the turnover/gross receipt exceeds the prescribed limit is to be determined in each year independent of the results obtained in the preceding year or years.  This section applies only if turnover/gross receipt exceeds the prescribed limit according to the accounts maintained by the assessee.  It would be advisable to maintain basic records to support the turnover/gross receipt for declare audit required or not. Analysis of Section 44AB: Applicability: This section is applicable to every person: Carrying on business shall, if his total sales, turnover or gross receipts, as the case may be, in business exceed or exceeds one crore rupees in any previous year; or Carrying on profession shall, if his gross receipts in profession exceed fifty lakh rupees in any previous year; or Carrying on business as specified under Section(s) 44AE, 44BB, 44BBB and declared profit less then as specified in the respective sections Carrying on business/profession as specified under Section 44AD, 44ADA and income exceeds the limits as specified in the respective sections Deriving income under Sections 44B, 44BBA and declared profit less than the limits specified Penalty for failure to get accounts audited:If any person who is required to get his accounts audited by an Accountant as compliance provision of 44AB,  before the specified date fails to do so shall be liable for penalty under section 271B.  The amount of penalty shall be one-half percent of turnover / gross receipts or Rs.150000/- whichever is lower.  This penalty shows the seriousness that the Government affixes towards Tax Audit under section 44AB.

Our Electrical Safety Audit Services offer a meticulous examination of your electrical systems. Our expert team assesses safety protocols, identifies potential hazards, and ensures compliance with regulations. We provide comprehensive reports outlining recommended improvements to enhance safety and efficiency. With our services, you can mitigate risks, prevent accidents, and maintain a secure electrical environment for your premises.

Boiler House Efficiency Improvement : Establish the present steam generation from the boiler and the steam loading pattern of the plant i.e. peak, average and minimum loads based on the metering and system at plant Evaluate the efficacy of the present operating practices and recommend any changes to ensure optimum boiler efficiency. Study the present blow down philosophy and suggest methods to optimize blow down and heat recovery from blow down. Study the present feed water management philosophy and same will be evaluated to ensure optimum feed water temperature to the boiler. Evaluate use for LP flash steam in the plant or take it back to feed water tank of boiler  Evaluate the efficacy / feasibility of using heat from available waste heat streams in the process towards heating the feed water   Quantify the potential for steam reduction in the plant : Evaluate the steam distribution network in the plant: Line sizing and routing Distribution with respect to pressure drop if any Type, quality & health of insulation. Condensate removal from steam mains. Establish % distribution loss on account of leakages and radiation and suggest methods to reduce the same Evaluate the desired vs actual parameters for steam as required by the process equipment Evaluate the plant historic data and observe the current operations for anomalies such as batch time / throughput variations and evaluate the impact of the current steam and condensate network on such variations  Evaluate the current steam supply parameters vis-à-vis the process recipe requirements including gradients etc. and evaluate gaps within the same Evaluate the plant for any throughput bottlenecks due to the steam system Evaluation of hot water generation and utilization in the process.   Key Takeaway Points : Avoiding clinker formation inside the boiler Increase the inlet air temperature to increase boiler efficiency Avoid High Negative Draft in Solid Fuel Fired Boilers Generate Steam at Higher Pressure Dissolved oxygen should be removed from the feedwater tank Injection of flash steam and condensate into the feedwater tank should be via a deaerator head Air to fuel ratio should be monitored and controlled to minimize unburnts Efforts should be made to minimize addition of surface moisture content in fuel. To deliver the same amount of energy, the flowrate of hot water will have to be 45 times than that of steam. Monitor flue gas temperatures to control stack loss. Using steam instead of thermic fluids for indirect heating is more efficient. Monitoring flue gas temperature gives a good indication of the boiler operating conditions Operating boiler closer to full load improves efficiency Higher feedwater temperature increases the boiler output Use saturated steam for indirect heat transfer applications. Every 6 DEG. C rise in feedwater temperature reduces the fuel bill by 1%.

Most-Trusted Consultancy Services for GSTR 9C GST Audit The GST regulation calls for a review of their monthly compliances by an audit linked with the yearly return. Taxpaying individuals need to start concentrating on the compliances under the GST regulation incorporation and put in signal followed by output reconciliations kind of imperative region of the GST audit certificate. At Raj Taxation Consultancy Services, have the confides to offer qualitative GSTR 9C GST audit services following the guidelines. Complete Auditing Services Our team believes in offering value-added solutions covering a detailed review of all the GST records combined with our suggestions on strengthening internal controls for accurate data entry, recording of data, data analysis, and data needs for compliance.

We prepare factory for Factory Capacity and Capability Audit (FCCA) for the any buyers as per their requirement.Main Steps included :Layout preparation Implementation of Necessary Formats Internal Audits Preparation of Procedures Trainings & Awareness wherever required Other required programs.

Our Trust Audit Services offer specialized support for non-profit organizations and charitable trusts in meeting their audit requirements. We conduct a thorough review of your financial records, ensuring compliance with legal and regulatory standards, including the Income Tax Act and relevant trust laws. Our expert team verifies the accuracy of your accounts, assesses your financial management practices, and ensures transparency in your financial reporting. With our trust audit services, we help you maintain proper documentation, avoid compliance issues, and ensure that your trust operates with full accountability and integrity.

The Lead Auditor course for the ISO standards, Quality Management System (QMS) is aimed at providing learners with the information and skills they need to plan, carry out, and report on a QMS audit in accordance with the relevant audit principles, procedures, and techniques. The training course helps the participants comprehend what an auditor does, how to interpret the ISO standard, and the fundamentals and methods of auditing.   Benefits To compare the obligations and duties of an internal auditor To plan, conduct, and report the audit To understand the interpretation of ISO standard To understand the interpretation of ISO standard Exercise and case study for learning. Context, Leadership, Support, Operation, Performance, and Improvement Needs for Quality Management Systems (QMS)  Auditing standards Auditor responsibilities and roles Setting up an internal audit Carrying out an audit Presenting audit findings   Who Should Attend? Top management. QMS managers and officers. QMS internal auditors. Management system professionals and consultants. Anyone interested in Quality management system.   Additionally, we also offer training programs based on customer requirements against the standards.

Our Statutory Audit Service ensures your financial statements are compliant with legal requirements and accounting standards. We conduct thorough audits for businesses of all sizes, providing an independent assessment of your company’s financial health. Our expert team reviews your accounting records, internal controls, and financial statements to ensure accuracy and transparency. We help identify discrepancies, mitigate risks, and improve financial reporting processes. With a statutory audit, you can enhance your credibility, build trust with stakeholders, and ensure compliance with regulatory authorities. Let us take care of your audit needs so you can focus on growing your business. Contact us today

We are one of the well-known names involved in offering Process Auditing Services. We are located in Thane (Maharashtra, India) and catering to clients across the nation. With the assistance of our team, we are capable of providing the best assistance in process auditing. Our experienced auditors analyze the entire process thoroughly and then audit the same by complying with the set industry standards. The ultimate aim is to make processes more stable, economical to operate, and yield the best results.   

Our company has earned accolades in offering Auditing Services to the clients. Our well-experienced charted accountants enable us to render these services that cover all direct and indirect taxation, auditing and book keeping, corporate law, MIS reporting and many others. We have team of professionals to conduct such audits. These services for in depth checking of day-to-day transactions, large business

Energy Audit Services/Power Quality Services in Chennai, Tamil Nadu. Today industry is highly conscious of the need for energy management and power quality improvement to save energy costs, reduce failures and improve productivity.  To enable such customers who would like to get immediate benefit of measurement at various power flow points at their works. We are now offering Energy Audit Services and offer sophisticated Load Managers, Instruments along with experienced personnel to measure power, energy and power quality parameters and submit a report on the same to help them in their endeavor to manage energy costs & improve power quality.   Scope of Auditing: To Create a baseline of Energy Consumption & GHG Emission. To Study Energy Conservation potential in Air conditioning & lighting load. To study the site for Generating Solar Energy. To Study the Boiler operation, Steam Consumption. To Study the potential for Waste Heat  recovery  management To propose measures to realize the potential for Energy Conservation. Study at capacitor banks and various feeder points for PF improvement potential Study at feeders & loads for harmonics and power quality problems Study at incomer to cross check EB meter and analyzer demand and energy billing patterns

Smeta is designed to improve social environmental performance through audit standards. It helps in reducing duplication of effort in ethical trade auditing; benefitting retailers, consumer brands, and their suppliers. We are a reputed agency who assists organizations in getting smeta audit done. our experienced auditors conduct insightful audits and share them through supplier ethical data exchange (sedex) system.

We are a reputed firm engaged in offering Occupational Safety and Health Audit services. Located in Mumbai, Maharashtra, we take up audit projects from all over the state and surrounded areas. Occupational Safety and Health Audit is conducted in terms of IS 14489: 2018. These services are rendered to check the adequacy and suitability of safety systems of the company. Also, it takes in account the implementation of the safety systems in the plant. Audit provides an opportunity for the company to assess its own OS & H system against set standards/norms.

• Training Mode: Online & Offline

Our Internal Rotary Inspection System (IRIS) Training Services offer specialized instruction for professionals seeking expertise in this advanced inspection method. Through comprehensive coursework and hands-on practical sessions, participants learn to proficiently operate IRIS technology to assess the integrity of tubing and pipelines. Led by experienced instructors and utilizing cutting-edge equipment, our training equips individuals with the skills necessary to conduct thorough and accurate inspections in industries such as oil and gas, nuclear, and petrochemicals. Trust us to enhance your team's capabilities in IRIS, ensuring the reliability and safety of critical infrastructure.

Established in 2017, LSF MN has been operating as a single window solution provider for a variety of pharmaceutical auditing needs of the clients. The company is based in Noida (Uttar Pradesh, India) and has a support of qualified & experienced pharmaceutical auditors, who work proficiently to assist clients in adhering to the stated industry norms. With our pharmaceutical auditing services, we assess the client’s functional operations and providing assistance to meet the regulatory norms. For a detailed discussion, ring us on the given numbers.

Getting an expert to perform auditing and assurance services for your company is essential. Working for our base office in Delhi, India, we are offering audit & assurance services that are in adherence to the Accounting & Auditing Standards (AAS) and the IFRS. Our auditing officers keep a close tab on all the latest amendments in the legal books to perform auditing accordingly. They analyze your financial books, account books, statements, and other things to offer reliable audit & assurance services at a fair charge. As your auditing officer, we perform a variety of services like:    Audit & Assurance Statutory Audit Internal Audits Tax Audits Management Audits Concurrent Audits Sarbanes Oxley Compliance Information System Audit (ISA) Due Diligences Stock Audits Project Audits Compliance Audits Special Audits Payroll Audits Productivity Improvement Audits Regulatory compliance and reporting Limited Review

Auditors and accountants are responsible for deterring and detecting fraud by evaluating accounting systems for designing, weaknesses and monitoring internal controls, determining the degree of organizational fraud risk, interpreting financial data for unusual trends and following up on fraud indicators. 21MS Financial Service, Maharashtra provides you with the best auditing services. Our services help companies ensure their accounting records are an accurate representation of the transactions that they have made. We have professionals who assist companies with constructing compliant financial statements and communicating with investors or shareholders, banks and other financial partners that their finances are in order. Therefore choose us and get our service for your company. For more details call us and speak to our executives.