KRISHNA INFRATECH INDIA COMPANY Ankleshwar, Gujarat

Krishna Steel Plank are made up for 14 Gauge(2.0mm) steel and are length in weight strong/durable design and for easy in Handling.

Steel Plank are made up for 14 Gauge(2.0mm) steel and are length in weight strongdurable design and for easy in Handling,Size 2400mm x 300mm,Steel PlanksWalkway. Planks made out of 2mm thick press Bent Sheets,Size 1800mm x 300mm,Steel Plankswalkway. Planks made out of 25 x 25mm square pipe section.

The pipe of Hot Rolled Steel as per BS-1139 Standard, Made from 38mm x 4 mm pipe 650mm length.

Forged Steel and the Specifications are as per BS-1139 Standard For Pipe of 48.3x48.3mm.

Cuplock spigotted standards are principally used in access scaffolding applications & also a base structure for form work support applications. They have cup joints at 500/1000mm intervals. The captive mobile top cups are designed to endure rough site handling & welded bottom cups are made from high-quality steel. Integral spigots, 150mm long, are provided at the top of each standard for making vertical connections. The spigots & the base of each standard incorporate 16mm dia. Holes to enable use of locking pins to join standards where necessary.

This model is for multipurpose uses like supporting slab, beams, staging of bridges etc. The lattice inside the Frame facilitates climbing very easy. The clearance in the frame provides an easy walk way on the floor.

Height Available in 2.0 mtr. up to 20.0 mtr. Tower Erected by using vertical and cross bras in all four directions to avoid any loose fitting castor wheels with or without rubber type used.

A high quality adjustable prop. Complete with swivel head and pre-drilled anchor base plate.    

Country of Origin : India

Material : Aluminum

Propex Mini Prop & High Quality are manufactured from high quality material. IS 1161 standard with paint finished for long life and are highly resistant to site wear and tear. Can be used on all type of ETP Plant Tank foundation, where adjustable load bearing member is recurred.    

Ledger-Horizontal Cuplock System The ledger are manufactured from 48.3mm O.D. Tube with forged steel blade ends which locate into bottom cups of the standards & are locked in place by the corresponding top cups. Ledgers are available in various lengths to provide the desired grid dimensions for scaffolding or form work production of the ledger since 1997 has been from thinner high grade steel tube. This contributes to a higher ledger for easier handling, Ledgers manufactured prior to 1997 are made from the thicker wall tube & weight approx. 20% heavier than the weights.    

This model is for multipurpose uses like supporting slab, beams, staging of bridges etc. The lattice inside the Frame facilitates climbing very easy. The clearance in the frame provides an easy walk way on the floor.

The Pipe of Hot Rolled Steel as per BS-1139 Standard, Made from 38mm x 4mm pipe 100mm length, the size of U is 150 x 170 x 125 x 100 x5, 6, 8mm.

Forged Steel and the Specifications are as per BS-1139 Standard For Pipe of 48.3mmx48.3mm.

This model is for multipurpose uses like supporting slab, beams, staging of bridges etc. The lattice inside the Frame facilitates climbing very easy. The clearance in the frame provides an easy walk way on the floor.

This cuplocks systems has been designed to meet the requirements of the construction & housing industries. The success of scaffolding cuplock lies in its principal design features. Speed of Assembly. Versatility of Application. Simplicity of Components & Their Connection. Elimination of Loose Wedges. No special Tools Required for Assembly (Hammer & Spirit Level Only). Flow Maintenance Required to keep in top working condition.

The ledger are manufactured from 48.3mm O.D. Tube with forged steel blade ends which locate into bottom cups of the standards & are locked in place by the corresponding top cups. Ledgers are available in various lengths to provide the desired grid dimensions for scaffolding or form work production of the ledger since 1997 has been from thinner high grade steel tube. This contributes to a higher ledger for easier handling, Ledgers manufactured prior to 1997 are made from the thicker wall tube & weight approx. 20% heavier than the weights.

The ledger are manufactured from 48.3mm O.D. Tube with forged steel blade ends which locate into bottom cups of the standards & are locked in place by the corresponding top cups. Ledgers are available in various lengths to provide the desired grid dimensions for scaffolding or form work production of the ledger since 1997 has been from thinner high grade steel tube. This contributes to a higher ledger for easier handling, Ledgers manufactured prior to 1997 are made from the thicker wall tube & weight approx. 20% heavier than the weights.

This cuplocks systems has been designed to meet the requirements of the construction & housing industries. The success of scaffolding cuplock lies in its principal design features. Speed of Assembly. Versatility of Application. Simplicity of Components & Their Connection. Elimination of Loose Wedges. No special Tools Required for Assembly (Hammer & Spirit Level Only). Flow Maintenance Required to keep in top working condition.

This model is for multipurpose uses like supporting slab, beams, staging of bridges etc. The lattice inside the Frame facilitates climbing very easy. The clearance in the frame provides an easy walk way on the floor

Made from Plate of Low Carbon Steel to support the standards and Ledgers. Made from pipe of 38mm x 100mm, welded with a plate of 150 x 150 x 6mm

Also known as Leveling Jack. The pipe if of Hot Rolled Steel as per BS-1139 Standard. Made from pipe of 38mm OD 650mm Height, the Breaking Load is 10 Tons.

The Pipe of Hot Rolled Steel as per BS-1139 Standard. Made from 38mm x 44mm pipe 650mm length, the size of U is 150 x 170 x 125, 5x 6x 8mm.

Are Manufactured from high quality material with painted finish for long life and are highly resistant to site wear and tear. Can be used on all types of building construction or for any type of use where an adjustable load bearing member is recurred. The high tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustment. The cost collar located below the gives fine adjustment for leaving or striking. The roiled thread ensures no loss of material or strength at this critical point.   Note L= Length of the Element. O.D.= Outer Diameter T= Wall Thickness Props must be braced in both direction by tubes and fixed couplers at approximately 250mm above Prop nut when extended beyond 3.6M or in near measure with same strength and load carrying capacity. Steel tubes used for inner and outer of Props are continuous welded and conforms to IS: 1998 or 1161, Grade YST 210.

To support Centering Plates, Beam Bottoms etc. Without any intermediate support. Manufactured from hot rolled M.S. Sheet, M.S. Rod, T-Angle M.S. Flats etc. The span is assembled together, one Outer and one sliding Inner to give variable lengths of span lock in any position.