Pressure Indicators Dealers

• Brand Name: Aerosense
• Country of Origin: Delhi
• Model Number: Aerosense

Aerosense Series ADPICDPI Differential Pressure Indicator Transmitter Series ADPICDPI Differential Pressure Indicator Transmitter Series CDPIADPI Differential Pressure Indicator Transmitter with circular standard Differential Pressure Gage cut out & 0.5% accuracy of F.S Product Applications: Pharma Cleanrooms HVAC Environmental Pharma Machinery Across filters Hospital violation rooms Operation theatres & laboratories Precision of measurement in HVAC duct pressure application makes the instrument suitable for optimization of energy & thereby its conversation is ventilation systems. Built in High and Low Buzzer Alarm for process set parameter. Violation with Acknowledgment key. Integrated 4 Digit Red LED 7 segment display of standard 0.5" size. Analog output & RS-485 communication lead to easy integration with variable frequency drives & SCADABMS systems, AHUs. Pressure Measuring Range: -10.0 to +10.0 mm.W.C.-25.0 to +25.0 mm. W.C. -50.0 to -50.0 mm.W.C.0.0 to+100.0 mm. W.C. -100 to +103 Pascal'-250 to +250 Pascal Alarms: Built In High & Low Buzzer Alarm for Process Set Parameter Violation with Acknowledgment Key Size: ADPI- Instrument Encbsure is in 75x70x40 mm. (WxHxD) CDPI-Standard 114.50 Maximum Over Pressure: 2 Times the rated pressure Unit Selection: mm.W.CiPascal selectable from front key Display: Integrated 4 Digit Red LED 7 Segment Display 0.5" High Sensor: Integrated High Speed Differential Pressure Sensor Resolution: 1 P3scal0.1 mm w.c Power 24 Volts D.C. Typical Output (Optional): 4-20 mAIsolated.' 0-10VDC Medium: Air or Gases (Non Corrosive) Accuracy: +1-0.5% of Full Sc3le. Connection: 2 Nos. Hose Nipples of 4mm. Stainless Steel 3*. the Beck Communication Optional: Isolated RS485 Modbus Protocol

Aerosense Differential Pressure Indicator Aerosense Differential Pressure Indicator is demanded for its impeccable qualities and features. It is extensively demanded in the applications areas where HVAC systems are installed to resolve the problem of humidity & temperature control. It is suitable for energy optimization and therefore widely used for the measurement of HVAC duct pressure. Along with the precised operations it has integrated high speed differential pressure sensor that provide accurate results in a significant manner. Features: Integrated red LED seven segment display Differential pressure sensor Stainless steel at the back Specifications: Case Material: 304 Stainless Steel Measure Range: 0-160MPa -0.1-0-2.4MPa Size: 100mm4"(From 40mm~250mm)

• Type: Pressure Indicators
• Brand Name: Gefran Italy
• Condition: New
• Display Type: Digital

Intek Instruments is engaged in offering a superior quality range of Gefran Pressure Indicator (40T96).  Features:- 1. Universal Input 2. with 3 Configurable Alarm 3. Re-transmission Output 4. 4-digit Display 5. with RS485 Communication  

• Type: Pressure Indicators
• Material: Plastic
• Shape: Rectangular
• Color: Grey
• Feature: Accuracy, Easy To Fit, Rust Proof
• Brand Name: Setra

Aerosense differential pressure indicator aerosense differential pressure indicator is demanded for its impeccable qualities and features. It is extensively demanded in the applications areas where hvac systems are installed to resolve the problem of humidity & temperature control. It is suitable for energy optimization and therefore widely used for the measurement of hvac duct pressure. Along with the prcised operations it has integrated high speed differential pressure sensor that provide accurate results in a significant manner. Features: integrated red led seven segment display differential pressure sensor stainless steel at the back

PRC offers a broad assortment of Pressure transducers / transmitters available in various models and material of construction, the instrument is compatible with numerous pressure control applications. Owing to accurate operations and long service life,   Features & specification: Suitable for Industrial & Laboratory applications Rugged & robust construction High durability Excellent performance Technical specification Type – Strain gauge, Capacity – 1000 Bar, Rated Output (mV/V) – 2.0002, Non-linearity (% FS) – 0.020, Hysteresis (% FS) – 0.020, Repeatability (% FS) – 0.020, Creep (% F.S/30 min) – 0.019, Temp. effect on zero (% FS/10°C) – 0.016, Temp. effect on span (% FS/10°C) – 0.019, Zero balance (% FS) – ±1, Input impedance (Ω) – 350 ± 5, Output impedance (Ω) – 350 ± 5, Insulation resistance (MΩ) – ≥ 5000 (50 V DC), Excitation voltage (V DC) – 9~12, Allowed excitation voltage (V DC) – 5~18, Compensated temp. Range (°C) – 10°C~+ 40°C, Operating temp. Range (°C) – -20°C~+55°C, Safe overload (% FS) – 120, Ultimate Overload (% FS) – 150 Technical specification for Pressure Indicator   Indicator – Micro controller based with Normal, Peak hold, tare zero Display – 6 digit ½” LED display Least count – 0.1 Bar Accuracy – Better then ±0.5 % of FSD (Within range of 10 – 90% of capacity) Circuit supply – 5 V DC & 12 V DC Power Supply – 230 Volt AC, 50 HZ

• Material: SS
• Usage/Application: Laboratory
• Pressure: 2.5 Bar/35 Psi
• Material Grade: SS304
• Measuring Range: 0-60 Psi

CLOGGING INDICATORS FOR PRESSURE FILTERS    During the system operation, the pressure drop through the filter increases as the element clogs, due to the contaminant retained. The filter element must be replaced when clogged and anyway before the pressure drop reaches the bypass valve set value. For this reason it is recommended a clogging indicator on the filter. It gives a visual or electrical indication and must have a set value lower than the bypass valve set value, to get an exact indication of the right time for filter element replacement.

Ace AI-DP1 Digital Differential Pressure Indicator is computerized readout differential weight marker intended for estimating the room weight inside Pharma clean rooms, Hospital activity theaters and Isolation rooms. Salient Features incorporate Unit Conversion at the press of a key between mm.W.C.& Pascals coordinated ringer alert for set point violation, Offset arrangement to meet Audit prerequisites, simple 4-20mA Output, 42 mm profundity for Clean Room Modular Wall Fitment and RS 485 Modbus correspondence for BMS/SCADA/PLC mix.

The Digital Pressure Indicator (CPH-6200) that we deal in is designed as per the international quality standards. It is compact in design and accurate in results. Order retail or bulk with us!   Specification : Model - CPH6200 Range - 0 to 1000 bar Accuracy - 0.2% & 0.1% Pressure source - External

Aerosense Differential Pressure Indicator Aerosense Differential Pressure Indicator is demanded for its impeccable qualities and features. It is extensively demanded in the applications areas where HVAC systems are installed to resolve the problem of humidity & temperature control. It is suitable for energy optimization and therefore widely used for the measurement of HVAC duct pressure. Along with the pr??cised operations it has integrated high speed differential pressure sensor that provide accurate results in a significant manner. Features: Integrated red LED seven segment display Differential pressure sensor Stainless steel at the back

pressure indicators size : 96 x 96 mm &  96 x48mm range : -1 mbar to +1mbar supply : 230vac

Extensive application possibilities stainless steel pressure sensors with measuring ranges up to 1,000 bar are available for the model cph6300 hand-held pressure indicator. The robust and waterproof design makes the cph6300 ideal for use in adverse environments. This digital indicator automatically detects the measuring range of the connected pressure sensor and guarantees a high-precision pressure measurement. Functionality the cph6300 can be used for measuring both gauge and absolute pressure. Differential pressure measurement is possible with the 2-channel version cph6300-s2, and two model cpt6200 reference pressure sensors possible. The selectable pressure units are bar, mbar, psi, pa, kpa, mpa, mmhg, inhg, mh2o and one customer-specific unit. An integrated data logger and various other functions such as min, max, hold, tare, zero-point adjustment, alarm, power-off, peak value detection (up to 1,000 measurementss), average value filter etc. Ensure that the cph6300 can be used for many different applications. The large, backlit display and also a long battery life complete the features of the cph6300.

Pressure Indicators and Controllers Send you inquiry with details like-Pressure Indicator or Controller, Application or any other information you have. Pressure Controller : Accepts 4-20mA from pressure transmitter, displays pressure and gives a relay op.

Unit of measurement : Pa, mmWC, mbar, inWG, inHg, PSI, mmHg High accuracy Software calibration - no trimpots 20~32 V DC supply User programmable using PC configurator PCC82 connected to USB port of any PC Auto-zero adjustment with pushbutton switch Dual 7-segment LCD display DIP switches for selection of unit RS485MODBUS RTU available

Aerosense Differential Pressure Indicator is demanded for its impeccable qualities and features. It is extensively demanded in the applications areas where HVAC systems are installed to resolve the problem of humidity & temperature control. It is suitable for energy optimization and therefore widely used for the measurement of HVAC duct pressure. Along with the prcised operations it has integrated high speed differential pressure sensor that provide accurate results in a significant manner. Features: Integrated red LED seven segment displayDifferential pressure sensorStainless steel at the back