Steel Authority of India Ltd Burnpur, Asansol, West Bengal

Coil Weight : 850 kg per coil Coil Dimension : Outer diameter -1240/1380 mm; Inner diameter 830/956 mm; Height 512/620 mm Packaging : Each coil is strapped with metallic straps. Common grades : IS 2062/2011, IS 2879/1998, SWR-14, SWR-10, SAE 1008*, SAE 1010* (*CHQ under development) Materials are also available in the following foreign specifications : JIS-G-3505-SWRM-10, JIS-G-3112-1991-SR-235, ASTM-A 510, M-93, SAE-1015, if sufficient orders are available. Also available from IISCO are the following: Coil Weight : 2000kg max. Coil Inner Diameter : 850/900mm Coil Outer Diameter : 1250mm Coil Height before/after compacting : 2000/1500mm Packaging by strapping : Tying with metallic strap Product Attributes : Fine grain steel or as per customer requirement of killed steel variety. Depth of decarburisation = 1.5% of Wire Rod Diameter (maximum) Gaseous Content: Nitrogen = 70 ppm (maximum). With our Vacuum Degassing facility, we can adhere to stricter specifications on mutual agreement.

SAIL tmt rebar EQR as well as Fe 500D and also other grades are available. Tolerances on Length and Nominal Mass as per IS:1786-2008 Specified Lengths : If bars are specified to be cut to certain lengths, each bar shall be cut within the deviations of +75mm, -25mm on the specified length, but if minimum lengths are specified the deviations shall be +50mm, 0mm Packaging: Signode Strapping in bundles of 5 tonnes Common grades: IS:2062, 2011 for bars and rods; IS: 1786, 2008 for rebars. Also available in ASTM-A615 Grade 40 (for TMT Wire Rods) and ASTM-A 615 Grade 40/Grade 60 (for TMT bars), if sufficient orders are there. Also available Fe 500, 550, 600, 550D, 500 HCR, 550 HCR, 600 HCR, 415SEQR, 415SHCREQR, 500SEQR, 500SHCREQR. In case of Cu-P grade HCR TMT, total Cu+P is 0.40% min., P can be added upto 0.12% max. Provided C

Mild steel scrap as per isri 200, 201 & 202 (grade1 only). Consisting of sheet and plate cutting, broken/twisted/deformed tmt rebar, structural like angle, channel, joist, beam, girder, etc.

MS ingots available from SAIL at cheapest prices as per the following specs: Common grades : IS 2830, IS 2831, SAE 1070, EN 8, EN 9, SAIL Tower, SAILMA, 20 MnCr 5, IS 1875, SWR-14, SAIL HCR. Notes : IS 2830/2012: (1) Min Si content not less than 0.1% in Silicon killed steel. (2) Total micro alloying elements like Nb, V and Ti not to exceed 0.2%. (3) Copper content shall be between 0.20 and 0.35%, if agreed. (4) All types of steel in above specification may be supplied in three grades A, B, & C, having Sulphur, Phosphorous (ladle analysis) and Carbon equivalent as follows: Grade A - Sulphur and Phosphorus each 0.05 max, CE 0.42 max; Grade B - Sulphur and Phosphorus each 0.045 max, CE 0.41 max; Grade C -Sulphur and Phosphorus each 0.04 max, CE 0.39 max. IS 2831/2012: (1) Semi finished steel products - such as Blooms, Billets, Slabs which are fit for further processing. The dimension and tolerances for this product shall be as per mutual agreement. (2) Micro alloying may be allowed subject to mutual agreement between the purchaser and the manufacturer. Micro alloying elements like Nb, V or Ti when used individually or in combination, the total content shall not exceed 0.20 per cent. (3) While placing order the steel should be designated by ‘designation’. (4) Copper may be present between 0.20 to 0.35 per cent as mutually agreed to between the purchaser and the manufacturer. The copper bearing quality steel shall be designed with a suffix Cu, for example, C15 Cu. (5) For grade C22, other requirements shall be as per relevant finished products standard. (6) In order to get desired properties, the chemical composition may be mutually agreed to between the manufacturer and the purchaser conforming to stipulation IS 2831.

Ms ingots available from sail at cheapest prices as per the following specs: common grades : is 2830, is 2831, sae 1070, en 8, en 9, sail tower, sailma, 20 mncr 5, is 1875, swr-14, sail hcr. notes : is 2830/2012: (1) min si content not less than 0.1% in silicon killed steel. (2) total micro alloying elements like nb, v and ti not to exceed 0.2%. (3) copper content shall be between 0.20 and 0.35%, if agreed. (4) all types of steel in above specification may be supplied in three grades a, b, & c, having sulphur, phosphorous (ladle analysis) and carbon equivalent as follows: grade a - sulphur and phosphorus each 0.05 max, ce 0.42 max; grade b - sulphur and phosphorus each 0.045 max, ce 0.41 max; grade c -sulphur and phosphorus each 0.04 max, ce 0.39 max. Is 2831/2012: (1) semi finished steel products - such as blooms, billets, slabs which are fit for further processing. The dimension and tolerances for this product shall be as per mutual agreement. (2) micro alloying may be allowed subject to mutual agreement between the purchaser and the manufacturer. Micro alloying elements like nb, v or ti when used individually or in combination, the total content shall not exceed 0.20 per cent. (3) while placing order the steel should be designated by ‘designation’. (4) copper may be present between 0.20 to 0.35 per cent as mutually agreed to between the purchaser and the manufacturer. The copper bearing quality steel shall be designed with a suffix cu, for example, c15 cu. (5) for grade c22, other requirements shall be as per relevant finished products standard. (6) in order to get desired properties, the chemical composition may be mutually agreed to between the manufacturer and the purchaser conforming to stipulation is 2831.

As per is 13502/2005 both steelmaking grade as well as foundry grade are available. Also other merchant pig iron grades and beached pig iron/granulated pig iron are also available.