Damper Valves Dealers

As a dependable Supplier from Golaghat(India), we ensure that our customers obtain only quality assured products. Owing to our excellent connectivity, trusted shipping facilities, we smoothly deliver the product basket to the clientele.

• Material : Polypropylene: Size Available : 3” to 10 “

Our Damper valves are abrasion, heat and corrosion resistant and can be used in a variety of applications from media transfer to isolation and venting.A damper is a valve or plate that stops or regulates the flow of air Inside a duct, chimney, VAV box, air handler, or other air handling equipment.This damper valve was designed to suit all corrosive and non-corrosive gas environments, high and low temperature service as well.

A real workhorse from the IV stables, IVGK model Butterfly valve incorporates the optimum design features to provide long trouble free service in the field. This general purpose soft seated Butterfly valve has a fully rubber lined single piece body with centric disc construction and is available in wafer type body pattern.

Our complete range of product is wrapped in strong, nontoxic, and superior-grade packs that protect the contents inside from damage, moisture, logistic movement, etc. Furthermore, the packaging has product details printed on it. With the assistance of our secured payment procedures, our clients prefer us all the more. Our transactions support online as well as offline modes.   Electrical Actuator Details: Manufacturer - Cair Euromatic Automation Pvt. Ltd. Brand / Model - Cair / Mod Approvals     - Design (Tuv) / Iso 9001:2008 / Ce / Iec Characteristic  - On - Off Type / Modulating Type Travel Angle - 90 Degree Indicator     - Continuous Position Indicator Supply - 220v Ac , 50 Hz Body Material - Aluminum Alloy Ambient Temperature - -10°c ~ 55°c Motor Insulation - Class F Protection Class  - Ip 67 – Weather Proof Limit Switch - 1 No + 1 No Output Of 220v Ac Position On Power Fail - Stay Put Manual Override - Provided   Details Size - 1½” to 88” MOC - IS Grade MS /  S.Steel Seals - Nitrile / NBR/ EPDM / Viton Pressure - Upto 10000MMWC / PN 6 / PN 10 (Depending on REQ.) Temp = -20° to 500°C Ends - Double Flanged 

We are leading Supplier & Manufacturer for the Damper Valves which also includes Damper Valve since 2010.     We are a well established manufacturer of butterfly dampers valves, that are used to regulate a fluid flowing through a section of pipe. Being a quality centric organization, we fabricate these dampers using high grade materials.

• Material: PP
• Power: Manual
• Feature: Casting Approved, Investment Casting
• Size: 3" to 12"
• Available M.O.C: PP Polypropylene, FRP
• Finishing: Polished

• Material: Cast Iron
• Technics: Gear Operated
• Power: Hydraulic
• Pressure: 1000Kpa
• Feature: Blow-Out-Proof, Casting Approved
• Port Size: 2cm -50cm
• Number Of Way: 2way

• Country of Origin: India
• Size: 300 Mm To 5600 Mm (higher Size On Request)
• Material: MS Fabricated (IS 2062 GR. B) / SS 304 / SS 316 / Inconel / Hastelloy (other Materials On Request)
• Color: Blue, Red, Sky Blue, White
• Feature: Blow-Out-Proof, Durable
• Technics: Gear Operated, Pneumatic & Electric Operation
• Power: Hydraulic, Manual
• Brand Name: HUBLUXE
• Application: HVAC, Power Plants, Oil, Gas, Chemical Industries, Boilers, Fans, Gas Turbine Applications
• Media: Hot Air, Cold Air, Flue Gases
• Temperature Of Media: 1500
• Material: MS fabricated (IS 2062 GR. B) / SS 304 / SS 316 / Inconel / Hastelloy (other materials on request)
• Size: 300 mm to 5600 mm (higher size on request)
• Design: Square, Rectangular, Round
• Temperature suitability: 30 deg. C to 1500 Deg. C
• Sealing efficiency: 97% to 99% and 100% with seal air
• Leakage Class: II, III & IV CAN BE OFFERED AS PER ASME AG-1
• Operation: Manual, Pneumatic & Electric operation
• Brand: HUBLUXE

• Power: Electric
• Condition: New, Good
• Brand Name: NATIONAL ENVIRO
• Type: SINGLE FLAP DAMPER
• Country of Origin: CHENNAI

please contact for further details

• Size: 40 MM To 300 MM
• Media: Flow Control Air / Steam / Gas
• Actuator: Pneumatic Acuretor Operated Double Acting / Single Acting
• Body Material: Cast Steel /IC CF8 / IC CF8M
• Disc: SG Iron / IC CF8 / IC CF8M
• Seat: Metal to Metal
• Leakage: 5% Leakage
• Rating: PN 6 Maximum
• Test Pressure: 10 Bar
• Temperature: Upto 180 Degree C Maximum
• Ends Connection: Wafer Type

• Country of Origin: India
• Material: Stainless Steel
• Feature: Casting Approved, Durable
• MOC: SS304/ SS316 / SS316L
• Material Thickness: 1.2 / 1.6 / 2 Mm

Features: Custom build jobs (as per customer requirement) Stainless Steel Tanks (single, double & triple jacket) with insulation from 0.1 KL to 25 KL  

• Country of Origin: India
• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch
• Type: Damper Valves
• Material: PP, UPVC
• Feature: Blow-Out-Proof
• Technics: Hard Sealing
• Port Size: 2cm -50cm, 5cm-60cm

BODY IS 210 Gr FG 200 | 220 | ASTM A 216 Gr WCB SEAT METAL TO METAL TESTING HYDROLIC BODY : 10 KgCm ² & SEAT : 5 % LEAKAGE RATING PN - 6 (MAXIMUM) OPERATING TEMPERATURE -25 °C TO 400 °C (DEPENDING ON MOC) UPTO 600 °C ENDS WAFER TYPE TO SUIT ASME B 16.5 (150#) OPERATION LEVER | GEAR | PNEUMATIC | OPERATED | ELECTRICAL | ACTUATED SIZE RANGE 40 MM TO 500 MM

We are well known for supplying of wide variety of Damper Butterfly Valve.

• Power: Pneumatic
• Pressure: High Pressure
• Structure: Butterfly
• Material: Alloy
• Place of Origin: India
• Standard or Nonstandard: Standard
• Media: cement
• Lead Time: 10 weeks