Kale Group of Industries Waluj, AURANGABAD, Maharashtra

Strainers are basically used as filters for capturing impurities in the system of Air-Conditioners. Strainer prevents the impurities from entering into the effective refrigerant passing area and keeps the system protected from chocking.     Special Feature High grade Copper body Stainless Steel Mesh Fully automated manufacturing set up. High Quality Testing instruments. Quality Lab to  conduct Reliability test.

It is used in Direct Cool Refrigerators, Chocolate coolers, Visi coolers, etc. where temperature is required to be maintained in freezer box from 8 ̊ C to -16 ̊ C. It is made from two aluminium plates which are bonded together on mechanical mill at elevated temperature. It is in the form of plate, on which flow lines called internal tubes are inflated. It is protected with powder coating layer measured at 50-60 microns. Leak testing with high pressure nitrogen i.e.    which ensures defect free product. Nitrogen purged, Evaporator gives confidence which ensures leak free evaporator. Surface coating - Powder coating ensures better life of evaporator. 

Metal Flush Box (Electric Concealed Box) Metal Flush Box is a container for electric connections, usually intended to conceal them from sight and deter tampering. A small metal box may form part of an electric conduit  in a building. If designed for surface mounting, it is used mostly in ceilings, under floors or concealed behind an access panel - particularly in domestic or commercial buildings. An appropriate type may be buried in the plaster of a wall cast into concrete  - with only the cover visible. It includes built-in terminals for the joining of wires. (Earthing Connection) A similar, usually Wall mounted, container used mainly to accommodate switches, sockets.   Special Features   Manufacturing set up of electric concealed boxes with variety of models. Press machines with capacity ranging from 10 ton to 200 ton Dedicated powder coating unit for Surface Coating to give better life of product. Special spot welding set up. Conveyorised packing line.  

  It is the combination of copper and aluminium pipe in which both tubes get resistance welded on high KV rated welding machines. Copper-Aluminium connecting kit, used to connect indoor and outdoor units of air conditioner which transfers cold gas from ODU to IDU with good transfer efficiency.   Advantages Copper is replaced by aluminium tube which is approximately 3 times less in weight. PVC coated aluminium tube gives extra life against oxidation formation so ensures long  life. Copper-Aluminium pipe is well insulated with EPE/UV resistant foam tube which avoids direct heat  contact on tubes.     Features Leak tested at high pressure about 650 PSI ensures defect free product. Resistance Welding –It gives great strength up to 1.3 KN pulling force Bursting Strength - aluminium tube easily withstand up to 2600 PSI tested on hydraulic  pressure testing.  

Fin evaporator is made from aluminum tubes and fins which makes to maintain certain specified temperatures in refrigerators.   Usages Mainly surface area of evaporator is used for exchange of heat. Surface area (mm2) is maintained with the help of aluminum tubes and aluminum fins. Desired area shall deliver desired heat exchange efficiency in frost free refrigerator.Fined evaporator can maintain up 0°C to-180°C temperature to protect from oxidation, anodic treatment carried out on fin evaporator.   Features Fin evaporator being refrigeration cycle product, is required to maintain proper thermal/heat exchange cycles, so it is leak tested at high pressure along with nitrogen purging inside evaporator.v v

Filter Dryer is used in HVACR system (Refrigeration).  It is a combination of Filter and Dryer.   A  Filter, known as Wire Mesh (S.S. Wire Mesh), is used  to  remove any foreign particle such as Dirt and Dust from  entering  in to the refrigerant flow path.  The Refrigerant flow control device is Capillary Tube.   Fully automated manufacturing set up. High Quality Instruments. Quality Lab to conduct Reliability test  of  Product. Manufacturing Driers for both DC and FF. Resistance welding set up.

trips, Ferrules and Washers used for heavy Electrical connections where these products are used for contacts of Aluminum to Copper.   Special Features   Bi-metal strips are available in different thicknesses  i.e. 1.0 mm, 1.5 mm, 2.0 mm and 3.0 mm and Copper to Aluminum ratio of 20:80 and 15:85. Our bi-metal strips are designed to reduce joint resistance and prevent galvanic corrosion. This ensures durability for terminations and improves reliability of power systems, irrespective of its voltage. The bond is strong yet metallurgical. It can be subjected to various tests such as bend, cup, chisel, electrical specific resistance, etc., to ensure that the most desirable properties of different metals and alloys are combined to solve the design problems, economically.

PRESS COMPONENTS FOR REFRIGERATORS, AIR-CONDITIONERS & WASHING MACHINES.   Press machines are available from 10 Tons to 400 Tons. Spot welding, CO2 Welding, riveting, tapping facilities. Refrigeration Press Parts, Air Condition press parts in sizes 0.23 mm to 3.00 mm thickness made from CRCA, GPSP & Stainless Steel.