Power Heaters Waluj, AURANGABAD, Maharashtra

Water and Oil immersion heaters are installed in a tank or container to heat a liquid. The installation can be over-the-side, flanged or threaded. These heaters are available with heating elements made of copper, steel, stainless steel, cast iron, titanium, and PFA coated. A wide selection of kilowatt ratings, shapes and mounting methods are available to suit many different types of applications. Features - These heaters are Efficient Compact heating units designed to provide bulk heat flow. Made from M.S./S.S. pipe welded with C.I./S.S. flange with replaceable refractory insulated heating element inside.  Application - Used to heat the water, oil, food stuffs, alkaline solutions, anodizing and plating baths etc. For fuel oil heating, oil circulating, for systems which supply hot oil to plastic & chemicals processes, oil jacketted kettles and similar equipment

Alkaline heaters are made of Chrome Nickel sheathed heating element brazed to C.I. junction box for mounting on side of the vessel, easy to remove and clean. Features - Heaters manufactured by using titanium pipe Mounting one side of the vessel Easy to remove and clean Available in various wattages and different sizes Application - Also used in commercial tanks for heating of the acids. Used for heating alkaline cleaning solution detergents and other alkaline solutions normally corrosive to mild steel (up to 90oC).

Thermocouples are the sensors used to receive the signal from the heating area in directly proportional to the rise of temperature. These are two dissimilar metals joints to form one junction and produce mill volt directly proportional to the rise in temperature. We manufacture J, K, R, S, N and any other type. Features - We build up standard, customized, mineral insulated Thermocouples and RTDs (PT-100) Thermocouples available in ‘J’, ‘K’, ‘T’, ‘R’, ‘S’ types as per requirement RTDs (PT-100) available in – 1. PT-PT-RH 10% 2. PT-PT-RH 13%.

Made of imported fused silica tubing with remountable heating element inside Used at highest temperature in all acids, ferric chlorides, etching baths, anodizing etc.

Features - Made of imported fused silica tubing with remountable heating element inside Used at highest temperature in all acids, ferric chlorides, etching baths, anodizing etc.

Porcelain Heaters, offer a large heated area to the Gases, liquids or semi-solids to be heated when inserted into a Thermo well. A Feature of this type of heater is that it may be removed for repair or replacement without draining the contents of the vessel. The sheathing Material may be M.S, S.S or Titanium or with clamp late, depending on the application. Features - We are engaged in manufacturing and supplying of a very wide range in porcelain heaters These heaters can be made in single, two and three phases Efficient heaters for high heating purpose Heaters available in various sizes and wattages Application - Used in Various oil plants Also used in the plating industries

Features - Ovens available from 35 degree Celsius to 450 degree Celsius temperature controller Also available with air circulation fan Muffle furnace 35 degree Celsius to 950 degree Celsius with PID temperature controller

An infrared heater or heat lamp is a body with a higher temperature which transfers energy to a body with a lower temperature through electromagnetic radiation. Depending on the temperature of the emitting body, the wavelength of the infrared radiation ranges from 780 nm to 1 mm. The relationship between temperature and wavelength is expressed by Wien's displacement law. No contact or medium between the two bodies is needed for the energy transfer. Infrared heaters can be operated in vacuum or atmosphere. Features - Infrared Heaters available in glass and ceramic type These heaters have high radiant efficiency up to 80% Very rapid heat up and cool down Glaze-coated ceramic body with no surface flaking or oxidation as on metal Sheath elements Available in various sizes and wattages Available with built-in type K thermocouple.   Application - Laminating Industries Drying textiles Plastic Forming Industries Thermo Forming Industries

Mica Band and Nozzle heaters are made of Nickel Chrome resistance ribbon precisely wound on specially selected Mica sheet. It is then insulated and covered by metal sheathing and rolled to the required shape. We build every technically possible heater as per your requirement. Features - We manufacture the MICA Band and the Nozzle Heaters in various sizes and in various patterns. Also the manufacturing is according to the Customized Drawings. Generally these heaters are used to heat the dies, barrels, nozzles and pipes of the plastic injection molding machine. Most economical heaters. Constant and long lasting efficiency. Available with thermocouple and cutout holes. Designed as per customer’s specifications. Application - Nozzles and barrels of Plastic Injection Molding Machines Rubber Processing Machineries

Manifold Heaters are available in Round & Square cross sections and various sizes and shapes as per customer's spcifications.The outer sheath is made of Inconel. Features - We manufacture Manifold heaters or Tubular heaters or Flexible heaters which are having high and good thermal conductivity. Heater manufactured with compression method, shows high heating capacity and also high insulation resistance. Precise forming of heaters required for it to seat properly into the milled slot in the mold. Available in 6.5mm, 6.7mm, 7mm and 8mm OD & the length as per requirement of our valuable customer. They can be shaped into any pattern depending on applications Application - Mainly used in the Hot Runner Molds.

A cartridge heater is a tube-shaped, heavy-duty, industrial joule heating element (electrical resistance) used in the process heating industry, usually custom manufactured to a specific watt density, based on its intended application. Highly compacted they reach a surface watt density of up to 50 W/cm². It may be used to heat any kind of substance or material, such as oil, air, or sugar. However, a common application are plastic pellets, which are melted in order to form molded plastic parts. An example of such a process is the "hot runner" process. Features - Generally used to heat the dies, hot plates, platens, injection molds and many more applications. Heaters manufactured in two types - 1.High Watt Density Cartridge Heaters 2. Low High Watt Density Cartridge Heaters Available in every standard size and wattage. Highly non – corrosive. Robust terminals with choice of exits. Application - Die and Platens Hot plates Injections Molds Shoe Industries Pharmaceutical Industries

Features - Heating mantels are used in laboratories and chemical industries. Tinning pots available in all sizes and shapes as per requirement. Used in wiring Harness Industries. Application - Heating Mantels mainly used in Pharmaceutical Laboratories It also used in the Soldering Bath for the soldering purpose

Features - Furnace coils mainly used in Muffle Furnace and in Melting and Holding Rating 450 degree Celsius to 1850 degree Celsius Available in various Gauges

These heaters are made of high grade heating resistance wire element supported in Fluted Refractory, which is sheathed in rust resisting steel. End-tab holes are provided for mounting. This is basically a Heavy Duty Refractory insulated strip heater with locked on Finns for fast transfer of heat to air. Features - Finns heaters mainly used to increase the heating area Ideal Heaters to transfer heat to air or other gases Manufactured in very wide range of dimensions and power ratings They can be shaped into any pattern depending on applications Application - For efficient heating , baking, curing of paints, for dryers of metals, in hot air ducts and in ovens Provides black heat in ovens, Industrial and commercial heating chambers converters and panel boards.

Our whole range of D type heaters is known for features like optimum performance and low maintenance. These are tested on the various parameters such as working and safety before being supplied to the clients. Heaters are fabricated using pre-tested, high grade stainless steel and brass metal which are again tested before being used in the manufacturing process. Our product range is available to our clients at cost effective prices. Features - D type heaters mainly used in molding industries, Liner and clutch plate industries, Gasket making machines Available in variety of specifications, these can also be designed as per client's requirements

Coil heaters are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with mgo powder and compacted for faster and efficient heat transfer. The heaters are annealed to acquire malleability for bending into any shape. Hot runner heaters with built in thermo couple are also available. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer stainless steel cover. Features - We manufacture High temperature Coil Heaters inbuilt thermocouple. They are provided good thermal conductivity to machine nozzles and good sheath temperature up to 450 degree Celsius. These heaters are manufactured with compression method, shows high heating capacity and also high insulation resistance. Anti acid, anti corrosion improved in high temperature. With flat and square cross sections for high efficiency due to flat surface. Manufactured in various sizes with thermocouple and without thermocouple. Voltage and Wattage according to applications. Precision fit on Hot Runner Nozzels Application - Hot Runner Nozzels Plastic Processing Industries Extruders Pipe forming Industries

Ceramic Band Heaters design consist of a helically wound resistance coil made from 80/20 michrome wire, evenly stretched and precisely strung through a specially designed ceramic insulating bricks forming a flexible heating mat. The ceramic heating mat along with ceramic fiber insulation is placed on a stainless steel housing made with serrated edges providing maximum flexibility for easy installation. Features - Ceramic Band Heaters manufactured in the Medium to High temperature range. Heaters built in Ceramic Fiber insulation and SS Sheet. Perforated heater with fins provide for faster cooling The terminals and the connections can be provided as per requirement Available with various diameter, length, wattage, voltage and configuration Application - Mainly used in Plastic industries, Packaging and Engineering industries and in the Extruders Blow molding Barrels Rubber Machinery

Providing the best range of Cast Heaters such as Cast Bronze Heaters Aluminum Casted Heater with effective and timely delivery. Features - Casting heaters are available in aluminum and brass in a very wide range Specially designed for packaging industries High thermal conductivity Accurate temperature control Contamination Resistance Application - Used in injections and blow molding ,extruders, yarn and filament industries Also used in food processing and in laboratory equipments, tier making etc.

We are offering a wide range of industrial heater, which includes coil heater,manifold heater,casting heaters,d type heaters,thermocouples,titanium heaters,furnace coils,porcelain heaters and more.

Coil heaters are made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with mgo powder and compacted for faster and efficient heat transfer. The heaters are annealed to acquire malleability for bending into any shape.

Manifold Heaters are available in Round & Square cross sections and various sizes and shapes as per customer's spcifications.The outer sheath is made of Inconel.

Shapes : Round

Sizes : Various

Application : Industrial Use

We are one of the leading exporters of the best range of Cast Heaters such as Cast Bronze Heaters Aluminum Casted Heater with effective and timely delivery.

An infrared heater or heat lamp is a body with a higher temperature which transfers energy to a body with a lower temperature through electromagnetic radiation. Depending on the temperature of the emitting body, the wavelength of the infrared radiation ranges from 780 nm to 1 mm.