Rectifiers Dealers in Aurangabad

Avail from us well designed Rectifier Diode Assembly at most reasonable prices. We are recognized as a pioneer among the renowned Suppliers of Rectifier Diode Assemblies. The Rotating Rectifiers for are suitable for diverse industrial applications. The Rectifier Diode Assembly of our company is well known for durability and precise designs. Features DG sets from 25 KVA to 1 MWWell designedRobust constructionEconomical

Being the prominent entity, we have been capable to provide our patrons a wide series of regulator rectifier (rr). These are available in varied structures.

We are one of the major Suppliers of Silicon Power Rectifiers in the market. Silicon Power Rectifiers are especially designed for continuous rated current with adequate margin of safety. The Silicon Power Rectifiers made accessible by us are capable of working at 100% load factor. ADVANTAGES : Step-less On-Load Voltage RegulatorDesigned for 100% Continuous LoadNil Wave Form DistortionHigh Efficiency of up to 97%Virtually Zero maintenance SPECIFICATIONS : Output Voltage : From Zero to Maximum rated D.C. Voltage (upto 1000 Volts)Output Current : From Zero to Maximum rated D.C. Current (upto 15000 Amps)Input Voltage : 415 Volts, 3-Phase, 50 Hz, A.C. SupplyCooling : Natural Oil CooledModes of Operation : Manual ControlElectrical with the help of push ButtonsMechanical with the help of T-HandleRipple Content : Less than 5%Efficiency :12 V Rectifier - 82%24 V Rectifier - 90%100 V Rectifier - 94%200 V Rectifier - 96%250 V Rectifier - >97% Special Features of our Rectifier Equipments : Our Rectifier equipments are wound with electrolytic prime grade copper strip to minimize power losses. In comparison to Aluminium conductor used by many other manufacturers. Our equipments are designed liberally as per capacity and are ideally suitable for marginal over loading conditions.Annealed Copper bus bars/ Aluminium Bus Bars of electrolytic grade with conductivity greater than 99.99% as per IS : 613-1984 are used.DIODES : Silicon Diodes are tested in house. Similar PIV batch and same forward drop diodes are used in the equipment for equal load sharing and reducing the power losses of diodes. The diodes in the rectifiers are fitted with suitable heat sink and hole storage resistors and capacitors.IPT : Inter Phase Transformer-IPT is connected between two star points of the secondary of the main transformer. The IPT improves the commutation, there by increasing the rating of the Rectifier.Lamination Core : we use imported CRGO lamination core which has minimum power losses and results in better efficiency of equipment and savings in energy bill.Meter : we use reputed make – AE/RISHABH or as per customers requirement. Optional Features : Constant Voltage Controller (CVC)Application : The CVC will automatically maintain a constant output voltage as per setting, irrespective of input voltage variationAdvantage : By using CVC, uniform quality of plating can be maintained, thereby controlling excessive consumption of plating raw material at high voltage.Constant Current Controller (CCC)Application : The CCC will automatically maintain a constant output current as per setting, irrespective of inpt voltage variation.Advantage : By using CCC uniform quality of plating can be maintained, thereby controlling excessive consumption of plating raw material at high voltage.D.C. Overload Trip SystemApplication : The DC Overload Trip system will sense the signal from the output of the Rectifier and trip the main contactor in case of overshooting the set range.Advantage : By using the DC Overload Trip System, the diodes will be saved during any accidental short circuit in the bus bars or in the tank.Zero Run Down SystemApplication : with the help of Zero Run Down System, once the Rectifier trips or is switched off while working, it will automatically start from 0 volts when restarted.Advantage : This saves the diodes from sudden load current, thus increases the life of the equipment.Signal Isolators to enable automation / PLC compatibilityApplication : The signal Isolators can be used to avoid the milli-volt drop of the Ammeter / Voltmeter signals. The Isolators can give output in milli-Volts / milli-Amps.Advantage : Ideal for use when the Voltmeter/Ammeter panel is kept too far from the Rectifier. These signal Isolators are also necessary for the input signals to the PLC panel, i.e. to make the Rectifiers PLC-compatible.

Smd rectifier, Oil Cooled Rectifier, Phase Control Thyristor

under hood parts, LED Signature Rear Lamp, magneto bearings, Shift Fork

under hood parts, wiper motors, LED Signature Rear Lamp

magneto, Rear View Mirror Assemblies, Moulded Relay Box, Interior Trims

Handlebar, Auto Wiper Motors, Motorcycle Fairing Kit

wiper motors, Varroc Lighting Systems, Automotive Combination Switche

Rectifier, Inverter, Ups

Rectifiers, Electrical Items, Auto Transformer, Voltage Stabilizer

Rectifiers, Switch Gears