Single Point Diamond Dresser Dealers in Chikalthana, Aurangabad

Diamond are selected in accordance to shape and crystal quality and "A", "AA", "AAA" Oriented setting of these diamonds by sintering process enables greater bonding efficiency of even small diamonds and consequent reduction in the use of bigger diamonds.

The Single Point Diamond Dresser is more versatile which is used for truing and dressing purpose of grinding wheel. The diamond for the single point dressing tools are selected for their structural strength, degree of sharpness & lack of detrimental flaws. The proper selection of single point diamond dresser depends on the dimension of grind hardness, grit size and abrasive type.

The Single Point Diamond Dresser is more versatile which is used for truing and dressing purpose of grinding wheel. The diamond for the single point dressing tools are selected for their structural strength, degree of sharpness & lack of detrimental flaws. The proper selection of single point diamond dresser depends on the dimension of grind hardness, grit size and abrasive type.Single Point Diamond Dressing Tools Grade:'A', 'B', 'C': These Stones are Bruted Type Commercial Quality diamonds.'AA' Class: These Stones are natural polished stones.'AAA' Class: These are premium grade Gem quality natural diamonds with 2-3 workable points.Diamond Carat Selection Formula:1 Carat = 0.2g(r+R)x0.004 = Carat Size Of Diamond (Radius+Grinding Wheel Depth)x0.004 = Carat Size Of Diamond Application tips :  The diamond point should contact the grinding wheel slightly below its center and at an inclination of   10-15�.  In feed increments of up to approx. 0.01-0.03 mm per dressing operation are possible.  Cooling improves the dressing results considerably and is mandatory for exacting dressing requirements.   A strong and continuous flow of cooling medium must be fed to the contact zone prior to the beginning   of the dressing process.  Shock-like cooling may destroy the diamond.  There must be a perfect fit between the holder of the diamond dressing tool and the dressing   device. Otherwise dimensionally stable dressing with a ture profile is not possible. There is also a risk   of the diamond being damaged.  Carefully place the diamond on the grinding wheel.

• Material: Coated Diamond + Metal
• Application: Grinding Wheel Dressing Tools
• Standard Shank Size: ½’’X 6’’ or As Per Requirement
• Diamond CT size available: 0.35 CT – 5.00 CT
• USD Prices: USD 0.88.00 - USD 12.00

The Single Point Diamond Tools are more versatile dressing tool, which is used for turning and dressing of grinding wheel. They are made of carefully selected raw diamonds mounted in holders by means of special bonds .The dressing tool takes care of two main functions, it removes abrasive grains which have become completely worn out, and it recreates the correct geometric shape of the grinding wheel. We offers 3 grades to refinish the wheel , when the wheel become dull. The pores between the grains become loaded with the material ground.The selection of the diamonds depends upon the dimension of grinding wheel , its hardness grit size, abrasive type, and individual dressing operation.Advantages of single point coated Diamond Truly and fine dressing. Increase the Wheel life. Reducing cost of Wheels and Tools.

Single Point Diamond Dressers, diamond dressing tool, Diamond Dresser

Made from select diamonds, this Single Point Diamond Dresser is mounted in matrix. One cutting-edge is presented to the grinding wheel of this Single Point Diamond Dresser. The diamonds for these Single Point Diamond Dressers are chosen for their structural strength, degrees of sharpness and number of points. This Single Point Diamond Dresser is present without any flaws and has the best of diamonds, which are selected as per the demands of the application. Further, we can customize these Single Point Diamond Dressers as per the set drawings and specifications of the clients. Grades Available : Natural PointBrutted A GradeBrutted B GradeBrutted C Grade

We have a highly skilled team of professionals, which enables us to manufacture finest quality diamond dresser that is used for cutting and grinding diamonds. Multipoint indexable crown can also be found here. Electroplated tools offer a mechanical bond holding the diamond or Cubic Boron Nitride (CBN) to the substrate. We have electroplated tools too. Diamond honing plates are also available. Our products are tested on various parameters to achieve international quality standards.

Single Point Diamond Dresser, Indentation Hardness Tester