Auditing Services

• Location: All India
• Service Mode: Offline
• Payment Mode: Offline/Online
• Industry: Commercial

Electrical Safety Audit Services in Chennai, Tamil Nadu, Thermography Testing/Thermal Imaging Testing Service in Chennai.   We are exporter engaged in offering Electrical Safety Audit Services – Thermography Test in Chennai, Tamil Nadu, India. Thermal Scanning is helps us to visualize and quantify changes in the surface temperature of electrical Switchgear. An infrared camera converts infrared radiation (heat) emitted from the surface of electrical equipment into electrical impulses. These impulses are Spotted as colours which represent the various temperatures. Thermal Imaging identifies equipment flaws and pinpoints any hot spots often invisible to the naked eye. When parts of your electrical systems begin to have problems, they give off heat – usually a sign of electrical resistance or excessive friction. Abnormal temperatures can be seen easily. Before an electrical component burns up, it heats up. Early detection with Infrared Thermal Scanning detects growing problems before they cause a system failure or fire.   Maintenance personnel can correct the problem before the component fails. Infrared thermography is used to perform inspections on electrical equipment because excess resistance on electrical apparatus indicates electrical faults such as: Loose connections Overloads Imbalanced circuits Faulty Equipment Damaged switches Faulty fuses

• ISO 17020 Accredited Inspection Agency: ISO 17025 Accredited Testing Laboratory

CDG provide Factory compliance Audit in Bhiwadi. What is compliance in factory?  Hence, the statutory factory compliance audit is conducted in factories to regulate the safety, health, licensing, working hours, annual leave, minimum wages, and so on.   A compliance audit is a comprehensive review of an organization's adherence to regulatory guidelines. Audit reports evaluate the strength and thoroughness of compliance preparations, security policies, user access controls and risk management procedures over the course of a compliance audit.   For example, a compliance audit could be issued to determine a textile mill is following the EPA (or Environmental Protection Act) guidelines for disposing waste. The EPA could send someone from their business, or they could hire a third party to assess the mill and send in the results.   Labour Law Compliance is the mandatory rules and regulations which the companies have to follow. These are a set of rules and conditions set for employment. The Economy and Working culture of the industries have changed and developed over time, but the Labour law compliance rules are still 50-100 years are old.  Details:  A Factory Audit or Supplier Audit (at CDG we call these Quality System and Compliance Audits) is a systematic evaluation of the quality system and compliance level of a supplier.  The purpose of a quality control audit is to help our clients verify the capability and suitability of their suppliers. This factory assessment is typically carried out by an internal or external quality auditor or factory auditor. Typically, these services would start out with a standard supplier evaluation or factory assessment and trigger a process of continuous improvement. Explore our range of quality control audit offerings and capabilities by clicking below on the relevant area of quality compliance challenge required. A supplier audit is when an organization audits a supplier to ensure that they are meeting requirements specified in a contract. These audits can be conducted on-site by reviewing processes or off-site by reviewing documentation submitted by the supplier, ensuring quality across your supply chain.  What is a compliance audit checklist?  A compliance audit checklist is a tool used by auditors to ensure that an organization is following the rules and regulations that have been put in place. The checklist contains a list of items that need to be audited and the appropriate procedure for each item  So, to summaries, compliance is an operational function of the firm. It is there to manage compliance risk and protect the business, but in a pragmatic and risk-based way. Audit is a much more focused business assurance function.  Simply put, regulatory compliance is when a business follows state, federal, and international laws and regulations relevant to its operations. The specific requirements can vary, depending largely on the industry and type of business.  Why Perform a Technical Audit  Ensure that quality and safety standards are maintained across your suppliers  Verify that a new supplier has the capability to meet your requirements  Manage and prevent quality risks by ensuring adequate in-factory systems are in place 

Smeta is designed to improve audit standards and promote mutual acceptance of audit reports. It helps in reducing duplication of effort in ethical trade auditing; benefitting retailers, consumer brands, and their suppliers. We are a reputed agency who assists organizations in getting smeta audit done. Our experienced auditors conduct insightful audits and share them through supplier ethical data exchange (sedex) system.

• Type: GST
• Location: Bihar
• Mode Of Service: Online
• Payment Mode: Online
• Type of Service: GST

We are a trusted name, when it comes to reliable Internal Support Services for Auditing. Backed by a team of expert professionals, we offer perfect solution for assessing, designing, developing and implementing cost effective auditing process for corporate and business houses. We are preferred by clients because of the effective internal controls that guarantee smooth and efficient working of the organization. As part of our Auditing Services, we offer : Stock Verification Cost Control Audits System Designing Management Audit Due Diligenge Investigations Surprise Checks Why Us? Support Services for Auditing Auditing under various enactments as Income Tax, GST, and Company Tax etc. Online Library of forms, statements and declarations formats Compliances with Indian accounting and auditing standards and IFRS Auditing tutorials guidelines standards and information library

We provide following service in compressorand Compressed air network, FAD Checking Energy Audit Leak Detection Efficiency check

• SEDEX CERTIFICATION: SEDEX AUDIT
• BSCI AUDIT: GOTS CERTIFICATION

we are providing exclusive services of quality inspection ( third party inspection) ,factory audit, social audit, production & delivery monitoring for textile goods. we are specialized in garment, home textiles, fabric, yarn & fashions accessories. in nutshell we are one stop solutions for consultancy, inspection and quality control. beside this we are also providing consultancy services for gots, oekotex-100, social compliance ( bsci, sedex, bsci, wrap & c-tpat, quality & productivity improvement projects & textile training. social audit services offered by us. 

Fully-Compliant School Audit Income Tax Return Services Our friendly and highly-skilled accountants at Raj Taxation Consultancy Services based in Bhopal can complete your school audit income tax return services, irrespective of how complex and tricky it seems way before the deadline, after which the penalty is levied. Though school audit income tax returns can be done by your in-house experts, the process is quite tedious. This is why we are here to help you with our team of tax advisors. Accurate and Fast School Audit Income Tax Return Services Our advisors, consultants, and CA’s have years of experience in the field and can guide you through every step of audit income tax return solution to make the process less complicated and quick for you. We will ensure that your school audit income return is done on time, and we also keep a tab on whether you are paying in excess. We can also help you get a tax rebate and ensure your school audit income return is done accurately and in the correct format.

Before starting any project we discuss with the Client the issues that are of main concern. At the end the Client receives a due diligence report containing all findings. Our approach is to save time, money and effort as well as to help in influencing the price at the outset of the deal. We assist clients in conducting financial, legal and accounting reviews in case of mergers, acquisitions and investments. A sound understanding of local laws, regulations and accounting practices enables us to vet all critical issues in detail.

• SEDEX: Amfori BSCI
• GRS: GOTS
• C-TPAT: ICS
• WCA: HIGGS
• FEM: SLCP

Sedex BSCI C-TAT GOTS GRS ICS WRAP FEM SLCP HIGGS Consultany services all over India. We are located in Mumbai, Maharashtra. More than 200 customers already complied

An excellent instrument for improvement is internal auditing of the Quality Management System, which evaluates the level of execution. This internal auditor course will include training sessions, activities, and group discussions in addition to instruction on how to accomplish its goals.   Course Objectives Ensure delegates are aware of the key principles involved in inspecting the quality management system To teach/improve practical auditing abilities so that one can earn an internal auditor certification To give the delegates the skills necessary to organize, manage, and perform internal QMS audits in conformity with ISO 19011’s guidelines and principles.   Benefits To comprehend the obligations and duties of an internal auditor. The audit’s planning, execution, and reporting. To comprehend how the ISO standard is interpreted. To comprehend auditing guiding principles and procedures. Exercises and case studies for education.   Training Outline Context, Leadership, Support, Operation, Performance, and Improvement: QMS Requirements. Auditing standards. Auditor responsibilities and roles. Setting up an internal audit. Carrying out an audit. Presenting audit findings.   Who Should Attend Top management. QMS managers and officers. QMS internal auditors. Management system professionals and consultants. Anyone interested in Quality management system.

With globalization, accounting rules & regulation and audit standards are changing very frequently. Successfully filling this role since incorporation. Our audit procedures are designed to ensure compliance with relevant statutory laws and specialization. Our approach focuses on ensuring that  internal controls are effective and disclosure requirements of the accounting standards and applicable regulations are met with. Our team of result-oriented professionals has considerable expertise in the field of Financial Auditing Services, professional auditing services etc. MPA considers that providing Professional Auditing Services are top priority and that the firm does not view such services as a commodity. MPA do this by emphasizing the importance of audit quality in training programs and annual performance reviews. We stand among the dependable providers of Auditing Services based in India. Clientele across sectors such as manufacturing, textiles, energy, food processing, telecommunications, Information technology enabled services. System cum Transaction audit methodology with well defined audit planning and execution procedures Additional inputs on : System and efficiency improvement Internal control review Statutory compliances Note : Empanelled with C&AG from many years

• ISO 17020 Accredited Inspection Agency: ISO 17025 Accredited Testing Laboratory

CDG is an ISO 17020 accredited inspection agency for NAAC green audits in India. CDG conduct green audit in India. CDG is an accredited certification services in India. Green Audit can be defined as systematic identification, quantification, recording, reporting and analysis of components of environmental diversity. The Green Audit aims to analyse environmental practices within and outside the college campus, which will have an impact on the eco-friendly ambience. It was initiated with the motive of inspecting the work conducted within the organizations whose exercises can cause risk to the health of inhabitants and the environment. Through Green Audit, one gets a direction as how to improve the condition of environment and there are various factors that have determined the growth of carrying out Green Audit. Green audit is assigned to the criteria 7 of NAAC, National Assessment and Accreditation Council which is a self-governing organization of India. The purpose and focus of the audit were mainly to review all environmental aspects in university which included following: 1. Review of all environment related applicable legal requirements and other requirements to which organization subscribes. These include regulatory compliance documents like statutory permissions / NOCs from statutory authorities, Pollution control board related norms, Emergency Preparedness Plan, and Spill Prevention Plan etc. 2. All environmental monitoring reports pertaining to air pollution, water pollution, noise pollution and status of results against applicable standards. 3. Examination of existing environmental management practices and procedures, including those associated with procurement and contracting activities. 4. Monitoring and review of all preventive maintenance of equipment’s connected with direct or indirect pollution. 5. Chemical management like storage, handling and use of chemicals, special arrangement for flammable chemical, and consumption tracking etc. 6. Waste management at site that includes storage and disposal, use of PPEs, hygiene conditions, any means of recycling through vendors. Hazardous waste and e-waste management and disposal in compliance with applicable norms. 7. Review of all critical areas and production processes in premise that has connection with environmental aspects and impacts. 8. Review of all the systems and processes in relation with environment that is part of environmental management system. 9. Review of environmental aspects including those associated with normal operating conditions, abnormal conditions including start-up and shut down, and emergency situations and accidents. 10. Review of overall environmental performance and practices of contractors and suppliers. 11. Review of extraction and distribution of raw material and natural resources. Distribution will include use and end life of product. 12. Evaluation of organization performance against the management objectives and targets in relation with environment. 13. Analysing the awareness level in premise for environmental policy and objectives which includes competency, awareness and understanding of roles and responsibility. 14. Operational control of all those operations that are associated with its identified environmental aspects and to check that control is effective in reducing the adverse impact associated with them. 15. Evaluation of previous emergency situations and accidents and review of emergency preparedness and response plan.

Eligibility to attend the course: Any degree holder .This course is designed to make a person capable of conducting Internal audit of any organization. Certificate would be provided to participant to give evidence for qualification as Internal auditor.Participant would understand the requirements of standard by undergoing this course and would get a general checklist for auditing an organization. Exercise would be provided to train the participants. On completion of the course a test paper would appear online for completion or this would be sent by e mail to participant for completion and return.The above is course content according to standards (I.E. ISP 9001:2015/ISO 14001:2015/ISO 45001:2018/ ISO 50001: 2018 either as a single topic or in combination as described in the course topic)Next step Register for the course by filling up following details. Attend course Attend examination Course pass when marks obtained is 75% and above - Download certificate Repeat exam when marks obtained in below 75%. Course Fee Per personSeparate standard ₹  900 / US $ 12.5(for each topic, For combination of two topics ₹1700/ US $ 22 ; Combination of three standards ₹2360 / US $ 31    

Boiler House Efficiency Improvement : Establish the present steam generation from the boiler and the steam loading pattern of the plant i.e. peak, average and minimum loads based on the metering and system at plant Evaluate the efficacy of the present operating practices and recommend any changes to ensure optimum boiler efficiency. Study the present blow down philosophy and suggest methods to optimize blow down and heat recovery from blow down. Study the present feed water management philosophy and same will be evaluated to ensure optimum feed water temperature to the boiler. Evaluate use for LP flash steam in the plant or take it back to feed water tank of boiler  Evaluate the efficacy / feasibility of using heat from available waste heat streams in the process towards heating the feed water   Quantify the potential for steam reduction in the plant : Evaluate the steam distribution network in the plant: Line sizing and routing Distribution with respect to pressure drop if any Type, quality & health of insulation. Condensate removal from steam mains. Establish % distribution loss on account of leakages and radiation and suggest methods to reduce the same Evaluate the desired vs actual parameters for steam as required by the process equipment Evaluate the plant historic data and observe the current operations for anomalies such as batch time / throughput variations and evaluate the impact of the current steam and condensate network on such variations  Evaluate the current steam supply parameters vis-à-vis the process recipe requirements including gradients etc. and evaluate gaps within the same Evaluate the plant for any throughput bottlenecks due to the steam system Evaluation of hot water generation and utilization in the process.   Key Takeaway Points : Avoiding clinker formation inside the boiler Increase the inlet air temperature to increase boiler efficiency Avoid High Negative Draft in Solid Fuel Fired Boilers Generate Steam at Higher Pressure Dissolved oxygen should be removed from the feedwater tank Injection of flash steam and condensate into the feedwater tank should be via a deaerator head Air to fuel ratio should be monitored and controlled to minimize unburnts Efforts should be made to minimize addition of surface moisture content in fuel. To deliver the same amount of energy, the flowrate of hot water will have to be 45 times than that of steam. Monitor flue gas temperatures to control stack loss. Using steam instead of thermic fluids for indirect heating is more efficient. Monitoring flue gas temperature gives a good indication of the boiler operating conditions Operating boiler closer to full load improves efficiency Higher feedwater temperature increases the boiler output Use saturated steam for indirect heat transfer applications. Every 6 DEG. C rise in feedwater temperature reduces the fuel bill by 1%.

Audit is an official inspection of an organization accounts by an independent body. It is a systematic and independent examination of books, accounts, statutory records, documents and vouchers of an organization to ascertain how far the financial statements as well as non-financial disclosures present a true and fair view of the concern. It also attempts to ensure that the books of accounts are properly maintained by the concern as required by law. Auditing has become such a ubiquitous phenomenon in the corporate and the public sector that academics started identifying an "Audit Society". The auditor perceives and recognizes the propositions before them for examination, obtains evidence, evaluates the same and formulates an opinion based on his judgement which is communicated through their audit report.Broadly, an Audit involves : In-depth study of existing systems, procedures and controls for proper understanding and give suggestions for improvement and strengthening. Ensuring compliance with policies, procedures and statutes. Comprehensive review to ensure that the accounts are prepared in accordance with Generally Accepted Accounting Policies and applicable Accounting Standards/IFRS. Checking the genuineness of the expenses booked in accounts. Reporting inefficiencies at any operational level. Detection and prevention of leakages of income and suggesting corrective measures to prevent recurrence. Certification of the books of account agreeing with the Balance Sheet and Profit and Loss Account. Issue of Audit Reports under various laws. Audit At a Glance : We conduct following types of audit : Statutory Audit of CompaniesTax Audit under section 44AB of Income Tax Act, 1961 Audit under any other provisions of Income Tax Act, 1961 Internal Audit Branch Audit of Companies, whether in India or Outside India Stock Audit Audit of Public or Private Trust Audit of Co-operative Societies Audit of Government NGO’s Audit of Schools, Hospitals, etc.

We are an organization that is engaged in rendering the most efficient solutions for cyber security audit at competitive charges. We are regarded as one of the best service providers in India. Thus, we ensure that all the cyber security requirements of our clients is fulfilled by our seamless solutions. With an increasing risk of data loss, information loss, and cyber threats, our audit solutions help you in protecting the important data. Cyber audit consultancy for the enterprise being provided, beside that training and consultancy works are being carried out, using various tools and techniques across the cyberspace.

Analyzing the opportunities as well as risks of performing outbound operations is imperative for any business and forensic audit and investigation is one of the first steps of it. The forensic audit & investigation services that we are offering from our office in Delhi, India, have assisted many companies across the globe in performing risk-free operations. Our team of forensic accountants, auditing experts, and investigators enable us to assist the companies in any type of fraud-related incidences or investigation. Our team works swiftly in such situations to ensure speedy investigation and audit.

• Training Mode: Online & Offline

Our Internal Rotary Inspection System (IRIS) Training Services offer specialized instruction for professionals seeking expertise in this advanced inspection method. Through comprehensive coursework and hands-on practical sessions, participants learn to proficiently operate IRIS technology to assess the integrity of tubing and pipelines. Led by experienced instructors and utilizing cutting-edge equipment, our training equips individuals with the skills necessary to conduct thorough and accurate inspections in industries such as oil and gas, nuclear, and petrochemicals. Trust us to enhance your team's capabilities in IRIS, ensuring the reliability and safety of critical infrastructure.

Auditors and accountants are responsible for deterring and detecting fraud by evaluating accounting systems for designing, weaknesses and monitoring internal controls, determining the degree of organizational fraud risk, interpreting financial data for unusual trends and following up on fraud indicators. 21MS Financial Service, Maharashtra provides you with the best auditing services. Our services help companies ensure their accounting records are an accurate representation of the transactions that they have made. We have professionals who assist companies with constructing compliant financial statements and communicating with investors or shareholders, banks and other financial partners that their finances are in order. Therefore choose us and get our service for your company. For more details call us and speak to our executives.

We are engaged in rendering our quality Fire Safety Auditing Services that is widely demanded in several sectors. We are backed by experienced professionals who are capable of identifying the pressure points of fire in a territory and providing valuable insights on how to deal with it. We are proficient in timely covering all the aspects of the auditing services. Because of our prompt service and reasonable charges, we are regarded as a reliable Fire Safety Audits Service provider from Hyderabad.

• NAME: TOTAL ENERGY CONSULTANT
• TYPE: THERMAL AND ELECTRICAL
• USAGE: SAVE ENERGY
• TIMING: 2-3 WEEK
• SCOPE: IMPROVE EFFICIENCY AND SAVE MONEY
• ELETRICCITY BILL REDUCE: YES

Energy is often the single largest controllable cost in manufacturing. Proper management of energy has a direct positive impact on a company’s bottom line. Energy audit is the first step in knowing the potential energy savings. It identifies area where the energy is being wasted by taking measurements at the key energy consumption points and the systematic study. It determines existing level of energy usage and recommends possible measures that would result in energy savings.

Corrosion Assessment by BENZ Packaging: Prolonging Asset Lifespan with Holistic Solutions Corrosion remains a persistent global issue, affecting various industries and infrastructure, and the substantial annual cost underscores the need for effective control measures. Managing corrosion proactively is crucial for safeguarding valuable assets. BENZ Packaging serves as an Integrated Service Contractor for Total Corrosion Management, providing a range of services to address this pervasive challenge. Primary Services:Comprehensive Corrosion Inspection: Our seasoned corrosion experts conduct a thorough examination of your assets, meticulously assessing corrosion risks. This detailed evaluation serves as the basis for crafting a personalized solution aimed at extending the life of your assets. Pre-Inspection: Prior to the comprehensive inspection, we perform a pre-inspection to gather essential information about your assets and operating environment. This initial assessment allows us to generate a detailed pre-inspection report, offering insights into potential corrosion risks and areas requiring attention. Prioritization & Budgeting: Recognizing the finite nature of resources and the need for strategic planning in corrosion management, we prioritize project milestones and meticulously prepare budgets tailored to your specific requirements. This ensures optimal impact from your corrosion mitigation efforts. Manpower Management: Our commitment to holistic solutions extends to managing manpower. We deploy, train, and replace an integrated team of highly skilled painters and specialists, ensuring meticulous care and attention for your assets.   Asset Management: Effectively safeguarding assets from corrosion demands a comprehensive approach encompassing preventive and corrective measures. We invest in equipment and training to ensure that your assets receive proper maintenance, shielding them from corrosion's relentless impact. Inventory Management & Reporting: To enhance efficiency and reduce inventory, we standardize your corrosion management program. This standardization fosters effectiveness, ensuring that your assets remain corrosion-free and operational for an extended period.   Controlling Corrosion through Education, Design, and Packaging Materials: We advocate a holistic strategy, including education on corrosion prevention strategies. Promoting corrosion-resistant design principles to mitigate risks effectively. Utilizing advanced packaging materials specifically designed to combat corrosion during storage and transportation. BENZ Packaging's Corrosion Assessment goes beyond inspection; it signifies a commitment to safeguarding your assets, ensuring longevity, and optimizing operational efficiency through comprehensive corrosion management.

Acquire the best kiln audit services in Thane (Maharashtra) by approaching Allan Smith Engineering. We are backed by a professional staff that holds expertise in kiln auditing. We make sure that no client faces the slightest inconvenience after acquiring our kiln audit service. As per the client requirement, the data is maintained for clinker and cement used. For further queries, feel free to get in touch with us now.

Our auditing services provide a thorough examination of your financial records, ensuring compliance and transparency. We offer internal and external audits, risk assessments, and regulatory compliance reviews, tailored to your business needs. Our experienced auditors deliver precise, unbiased reports, identifying areas for improvement and safeguarding against potential risks. With a commitment to integrity and accuracy, we help you maintain financial health, enhance operational efficiency, and build stakeholder confidence. Trust us for reliable auditing solutions that support your business's success.

Our Tax Audit Service ensures that your financial statements comply with tax regulations and are thoroughly reviewed to minimize tax liabilities. We help businesses, both small and large, fulfill their tax audit requirements as per the Income Tax Act. Our experienced team carefully examines your financial records, transactions, and tax returns, providing a detailed audit report that highlights discrepancies and areas for improvement. We also offer valuable advice to optimize your tax planning and ensure compliance with the latest regulations. Trust us to handle your tax audit needs efficiently, minimizing risks and ensuring smooth business operations. Contact us today.

Our Electrical Safety Audit Services offer a meticulous examination of your electrical systems. Our expert team assesses safety protocols, identifies potential hazards, and ensures compliance with regulations. We provide comprehensive reports outlining recommended improvements to enhance safety and efficiency. With our services, you can mitigate risks, prevent accidents, and maintain a secure electrical environment for your premises.

We are service providers of Cost Audit Services, Cost Accounting Records Services etc.

Our company has earned accolades in offering Auditing Services to the clients. Our well-experienced charted accountants enable us to render these services that cover all direct and indirect taxation, auditing and book keeping, corporate law, MIS reporting and many others. We have team of professionals to conduct such audits. These services for in depth checking of day-to-day transactions, large business