Spark Gaps Dealers

• Type: Weatherproof Enclosure
• Application: Electrical Transients
• Max Discharge Current: 70 kA
• Current handling Capacity: 50ka and 100ka
• Insulation resistance: 1 Gohm
• Impulse current by pole: 25 kA

Measuring Spark Gap are widely used for high voltage measurement, calibration & during chopped wave impulse tests. We offer these Measuring / Chopping Gaps with sphere diameters 100mm, 250mm, 500mm, etc. These Measuring / Chopping Gaps are designed in compact size and are light in weight, which make them portable. We offer these Measuring / Chopping Gaps at very reasonable prices.We also manufacture Multiple Chopping Gaps (Electro magnetically operated and also pneumatically operated) for integration with our Impulse Generators for chopping tests.

Protec Isolation Spark Gap is used to equalize potential between lightning protection earthing system and functionally separate earthing systems during rise in ground potential due to lightning strikes.   Features:   Available in 50kA and 100kA Peak Surge Current handling capacity Thermal conductive fire proof and water proof resin encapsulation Weatherproof enclosure Quick response time High energy handling capability High Thermal Stability As per UNE 21186; NFC 17-102 recommendations of lightning equi-potential bonding

• Country of Origin: Made In India
• Country of Origin: Made in India
• SBV: 30kV ±7%
• Control: 15kV to 24kV
• I Peak: 10A
• Trigger Voltage: ≈15kV Pulse
• Type No: Z/44/41
• Brand Name: Zeonics Systech

Operation and fields of application Isolating spark gaps provide galvanic isolation of electrically conducting parts of an installation that must not be connected to each other. The bridging of proximity points or making connections to pipe work and tank installations that have cathodic corrosion protection.

Isolating spark gaps have been designed to isolate electrical system components, which under normal operating conditions are not connected together. I

For indirect connection earthing of functionally isolated parts of installations under lightning conditions For lightning equipotential bonding according to IEC 62305 With corrosion-resistant stainless steel connections For installation in buildings, outdoor locations and damp rooms as well as for underground installation Extremely heavy-duty devices

DESCRIPTION : • Indicated for the connection of TV and communications antennas and cathodic protection.• Complies with the requirements set forth in the standards:    EN 50.164/3 • Maximum intensity 50 kA, wave type 10/350 µs. • Response voltage (1,2/50 µs) = 15kV• It can be supplied with terminal connectors (sleeves) for tape or for 50-70-95 mm² cross   section cables. Stainless steel hardware.

Isolating spark gaps have been designed to isolate electrical system components, which under normal operating conditions are not connected together. If lightning strikes cause a potential increase in one of the electrical system components, the isolating spark gap guarantees a conductive connection and therefore Equipotential bonding. Isolating Spark Gaps are used when conductive installation components situated in explosion-hazard areas cannot be connected directly with each other. The spark gaps with low spark over voltage are especially efficient for isolated installation components with little insulation resistance.

spark gaps, broadcasting tubes, vacuum tubes, rf capacitors

Isolating Spark Gap, insulation monitoring devices

Protection & Spark Gaps, Antenna accessories, Process Field Bus

Triggered Spark Gap, CADDY Flexible Conduit And Cable Hanger

Isolating Spark Gap, Float Cum Boost Charger, car battery charger