Auditing Services

We are a reputed firm engaged in offering Occupational Safety and Health Audit services. Located in Mumbai, Maharashtra, we take up audit projects from all over the state and surrounded areas. Occupational Safety and Health Audit is conducted in terms of IS 14489: 2018. These services are rendered to check the adequacy and suitability of safety systems of the company. Also, it takes in account the implementation of the safety systems in the plant. Audit provides an opportunity for the company to assess its own OS & H system against set standards/norms.

Boiler House Efficiency Improvement : Establish the present steam generation from the boiler and the steam loading pattern of the plant i.e. peak, average and minimum loads based on the metering and system at plant Evaluate the efficacy of the present operating practices and recommend any changes to ensure optimum boiler efficiency. Study the present blow down philosophy and suggest methods to optimize blow down and heat recovery from blow down. Study the present feed water management philosophy and same will be evaluated to ensure optimum feed water temperature to the boiler. Evaluate use for LP flash steam in the plant or take it back to feed water tank of boiler  Evaluate the efficacy / feasibility of using heat from available waste heat streams in the process towards heating the feed water   Quantify the potential for steam reduction in the plant : Evaluate the steam distribution network in the plant: Line sizing and routing Distribution with respect to pressure drop if any Type, quality & health of insulation. Condensate removal from steam mains. Establish % distribution loss on account of leakages and radiation and suggest methods to reduce the same Evaluate the desired vs actual parameters for steam as required by the process equipment Evaluate the plant historic data and observe the current operations for anomalies such as batch time / throughput variations and evaluate the impact of the current steam and condensate network on such variations  Evaluate the current steam supply parameters vis-à-vis the process recipe requirements including gradients etc. and evaluate gaps within the same Evaluate the plant for any throughput bottlenecks due to the steam system Evaluation of hot water generation and utilization in the process.   Key Takeaway Points : Avoiding clinker formation inside the boiler Increase the inlet air temperature to increase boiler efficiency Avoid High Negative Draft in Solid Fuel Fired Boilers Generate Steam at Higher Pressure Dissolved oxygen should be removed from the feedwater tank Injection of flash steam and condensate into the feedwater tank should be via a deaerator head Air to fuel ratio should be monitored and controlled to minimize unburnts Efforts should be made to minimize addition of surface moisture content in fuel. To deliver the same amount of energy, the flowrate of hot water will have to be 45 times than that of steam. Monitor flue gas temperatures to control stack loss. Using steam instead of thermic fluids for indirect heating is more efficient. Monitoring flue gas temperature gives a good indication of the boiler operating conditions Operating boiler closer to full load improves efficiency Higher feedwater temperature increases the boiler output Use saturated steam for indirect heat transfer applications. Every 6 DEG. C rise in feedwater temperature reduces the fuel bill by 1%.

• Location: All India
• Service Mode: Offline
• Payment Mode: Offline/Online
• Industry: Commercial

The Supplier Ethical Data Exchange, or Sedex for short, is a globally renowned online platform that allows members to provide customers and partners with detailed information about their social and ethical performance. The aim is to ensure greater transparency across the entire supply chain.The SMETA Audit Methodology :SMETA audits use the ETI Base Code, founded on the conventions of the International Labour Organization, as well as relevant local laws. SMETA audits can be conducted against two or four auditing pillars. The two pillars mandatory for any SMETA audit are Labor Standards and Health & Safety. The two additional pillars of a 4-pillar audit were introduced to further deepen the social responsibility aspect of SMETA audits.A SMETA 2-pillar audit comprises the following modules: Labor Standards Health and Safety Additional Elements : Management Systems Entitlement to Work Subcontracting and Homeworking Environmental assessment (shortened) A SMETA  4-pillar audit covers the above elements, plus: Environmental assessment (extended) Business Ethics

We prepare factory for Factory Capacity and Capability Audit (FCCA) for the any buyers as per their requirement.Main Steps included :Layout preparation Implementation of Necessary Formats Internal Audits Preparation of Procedures Trainings & Awareness wherever required Other required programs.

Our company has earned accolades in offering Auditing Services to the clients. Our well-experienced charted accountants enable us to render these services that cover all direct and indirect taxation, auditing and book keeping, corporate law, MIS reporting and many others. We have team of professionals to conduct such audits. These services for in depth checking of day-to-day transactions, large business

• ISO 17020 Accredited Inspection Agency: ISO 17025 Accredited Testing Laboratory

The supplier audit services provided by CDG Inspection Ltd will assist in ensuring that the desired processes and procedures for reaching compliance are followed. We are based in Gurgaon, Haryana. We will compile the audit findings and submit a comprehensive performance report to both the client and the supplier. As a result, they are frequently tailored to the needs of the company. These statements, however, only give a limited level of certainty. As a result, a chain of custody control should be a key component of any REACH compliance approach. In addition, to reduce risk and costs, a balanced approach to supply chain engagement and involvement, backed by audits and monitoring, must be developed. A supplier audit inspects a supplier’s usage of industry regulation practices, including health and safety and correct manufacturing processes. Generally, auditing a supplier covers a large area with several practices. Therefore they are usually bespoke to the client’s requirements. The supplier auditing process can differ for each industry, from food to electrical goods. As companies grow the size of their supply chain, selecting the appropriate supplier is essential. A supplier’s reputation and quality will ensure that business runs smoothly and reduce potential issues or risks. Because of this, an audit of suppliers is essential to help in the decision-making process. Some of the benefits of implementing a supplier audit are: 1. The Audit Reveals Potential Risks, A supplier audit can review all production processes, including shipping, manufacturing, and quality. They may give insight into gaps and check if these will cause any issues with the delivery to a client. Therefore potentially mitigating delays or deformities in the product. 2. Improves Customer Satisfaction, An organization relies on its reputation with customers. This is done through the quality of the products put forth to them. Implementing strong standards and ensuring a supplier follows them allows for customer satisfaction to be upheld. A supplier audit can assist in the quality control processes of a supplier to potentially mitigate any product quality or safety issues. It is also a way for an organization to measure the supplier’s performance. 3. Helps Build Communication With Suppliers A supplier audit is also a way to improve and maintain strong communication with a supplier. Clear visibility and understanding of suppliers’ activities can assist with improvements and the business relationship. Regularly scheduled audits ensure objectives are met and can be constantly developed depending on the organization’s needs. We at CDG provide a range of high-quality supply chain innovations and solutions, including supplier audits. With over 25 years of experience within the quality control industry. We understand the importance of clear information for organizations to make valuable choices. Contact us to learn more about our supplier audit services and how we can help your organization with its supply chain needs. When supplier audits are conducted, an organization follows a procedure to consistently measure supplier quality and compliance. This is recorded in a supplier audit report. This report contains all the details of the audit, this includes: Details of the factory, including the key team and location.  A summary of the audit results. Key attention points provide more details regarding faults and general comments. A list of follow-up suggestions to improve the supplier. A full audit list includes general information and all the detailed inspection findings that work on an ABC quality scale. Finally, a section for images taken whilst on location provides evidence of any faults.  

Our Income Tax Audit Services provide comprehensive support for businesses and individuals in fulfilling their tax audit obligations under the Income Tax Act. Our expert team ensures that your financial records, books of accounts, and tax filings are thoroughly reviewed and compliant with all legal requirements. We help identify discrepancies, optimize tax deductions, and minimize liabilities, ensuring accurate reporting of income and expenses. With our timely and professional services, we ensure that your tax audit is completed smoothly, reducing the risk of penalties or scrutiny from tax authorities.

By utilizing modern machines and latest equipment, we are engaged in offering a wide range of Energy Audit to meet the demands of our clients. Energy Audit is sturdily constructed and ensures longer functional life. These products are well known for their high strength, durability, and superlative performance.Features : Longer operational life Efficient working Longer service life Application : Study at machinery for energy saving potential Study at capacitor banks and various feeder points for PF improvement potential Study at feeders & loads for harmonics and power quality problems Study at incomer to cross check EB meter and analyzer demand and energy billing patterns Evaluate new energy saving devices and measures Study at harmonic filters Identify potential problems in areas of frequent breakdowns.

Environmental audit is a general term that can reflect various types of evaluations intended to identify environmental compliance and management system implementation gaps, along with related corrective actions. In this way they perform an analogous (similar) function to financial audits.

We are a trusted name, when it comes to reliable Internal Support Services for Auditing. Backed by a team of expert professionals, we offer perfect solution for assessing, designing, developing and implementing cost effective auditing process for corporate and business houses. We are preferred by clients because of the effective internal controls that guarantee smooth and efficient working of the organization. As part of our Auditing Services, we offer : Stock Verification Cost Control Audits System Designing Management Audit Due Diligenge Investigations Surprise Checks Why Us? Support Services for Auditing Auditing under various enactments as Income Tax, GST, and Company Tax etc. Online Library of forms, statements and declarations formats Compliances with Indian accounting and auditing standards and IFRS Auditing tutorials guidelines standards and information library

Acquire the best kiln audit services in Thane (Maharashtra) by approaching Allan Smith Engineering. We are backed by a professional staff that holds expertise in kiln auditing. We make sure that no client faces the slightest inconvenience after acquiring our kiln audit service. As per the client requirement, the data is maintained for clinker and cement used. For further queries, feel free to get in touch with us now.

In Transfer Pricing Audit (TPA) we examine the pricing of transactions between related two or more associates. By applying and documenting various test methods, it is determined whether the transactions are conducted under market conditions and survive the scrutiny of the IRS and other tax authorities. Section 92E of Income Tax Act, 1961 is applicable on the TPA. The TPA is applicable on every person who has entered into an international transaction and aggregate value of such transactions exceeds Rs. 1 crore and specified domestic transactions exceed INR 20 crore in a financial year. In case the aggregate value of such transactions does not exceed its prescribed limited then it is not mandatory to maintain the aforesaid information and documents

AMA is specialized in Internal/Management Audits which are primarily conducted in order to provide the client’s management a clear, comprehensive and unbiased analysis of the functional efficiency of the organization and to suggest possible areas for improvements. We Ashish Mahajan & Associates strongly believe in Internal Audits being a value addition exercise rather than a mere compliance exercise.

Audit is an official inspection of an organization accounts by an independent body. It is a systematic and independent examination of books, accounts, statutory records, documents and vouchers of an organization to ascertain how far the financial statements as well as non-financial disclosures present a true and fair view of the concern. It also attempts to ensure that the books of accounts are properly maintained by the concern as required by law. Auditing has become such a ubiquitous phenomenon in the corporate and the public sector that academics started identifying an "Audit Society". The auditor perceives and recognizes the propositions before them for examination, obtains evidence, evaluates the same and formulates an opinion based on his judgement which is communicated through their audit report.Broadly, an Audit involves : In-depth study of existing systems, procedures and controls for proper understanding and give suggestions for improvement and strengthening. Ensuring compliance with policies, procedures and statutes. Comprehensive review to ensure that the accounts are prepared in accordance with Generally Accepted Accounting Policies and applicable Accounting Standards/IFRS. Checking the genuineness of the expenses booked in accounts. Reporting inefficiencies at any operational level. Detection and prevention of leakages of income and suggesting corrective measures to prevent recurrence. Certification of the books of account agreeing with the Balance Sheet and Profit and Loss Account. Issue of Audit Reports under various laws. Audit At a Glance : We conduct following types of audit : Statutory Audit of CompaniesTax Audit under section 44AB of Income Tax Act, 1961 Audit under any other provisions of Income Tax Act, 1961 Internal Audit Branch Audit of Companies, whether in India or Outside India Stock Audit Audit of Public or Private Trust Audit of Co-operative Societies Audit of Government NGO’s Audit of Schools, Hospitals, etc.

Established in 2017, LSF MN has been operating as a single window solution provider for a variety of pharmaceutical auditing needs of the clients. The company is based in Noida (Uttar Pradesh, India) and has a support of qualified & experienced pharmaceutical auditors, who work proficiently to assist clients in adhering to the stated industry norms. With our pharmaceutical auditing services, we assess the client’s functional operations and providing assistance to meet the regulatory norms. For a detailed discussion, ring us on the given numbers.

Our auditing services provide a thorough examination of your financial records, ensuring compliance and transparency. We offer internal and external audits, risk assessments, and regulatory compliance reviews, tailored to your business needs. Our experienced auditors deliver precise, unbiased reports, identifying areas for improvement and safeguarding against potential risks. With a commitment to integrity and accuracy, we help you maintain financial health, enhance operational efficiency, and build stakeholder confidence. Trust us for reliable auditing solutions that support your business's success.

We have developed knack of providing a superior range of Auditing & Assurance Services in compliance with Accounting & Auditing Standards (AAS) and IFRS. We hire a team of experienced professionals who are experienced in delivering these services. Our zero error performance translates into high satisfaction among our clients. All day round, we make our services available. We conduct our services making it hassle free for the clients. For providing our services, we make use of modern approaches and techniques. Details : We are counted amongst the prominent providers of Audit & Assurance Service. Our entity is based in Delhi, India. We offer these services in complete adherence to the Accounting & Auditing Standards (AAS) and IFRS. We are well acquainted with the latest amendment in the laws and standards, which enable us to render a highly authentic and reliable service. Under this, we offer various related services like internal audit, due diligence report, statutory audit, stock audit, etc. Our offered services are well-known for their excellence and timely execution. We offer our clients a comprehensive range of Audit & Assurance Services that ensures efficient management of risks within organization in various operational activities. Our professional members and CAs endeavour to follow the Accounting & Auditing Standards, IFRS and related laws. Our services are destined to achieve desired business objectives of our valued clients and also help in finding out accurate and fair view of financial statements of the organization. Our audit & assurance services include Internal Audit and Management Audit. Stock Audit and Reporting. Accounting Compliance and Reporting. Statutory Audit or Audit Required By Any Law. Financial Statement Audit. Sustainability Reporting. Systems and Controls Assessment. IFRS Reporting. Independent Controls & Systems Process Assurance. Regulatory Compliance and Reporting. Corporate Reporting Improvement. Due Diligence Reporting. Investigations.

An excellent instrument for improvement is internal auditing of the Quality Management System, which evaluates the level of execution. This internal auditor course will include training sessions, activities, and group discussions in addition to instruction on how to accomplish its goals.   Course Objectives Ensure delegates are aware of the key principles involved in inspecting the quality management system To teach/improve practical auditing abilities so that one can earn an internal auditor certification To give the delegates the skills necessary to organize, manage, and perform internal QMS audits in conformity with ISO 19011’s guidelines and principles.   Benefits To comprehend the obligations and duties of an internal auditor. The audit’s planning, execution, and reporting. To comprehend how the ISO standard is interpreted. To comprehend auditing guiding principles and procedures. Exercises and case studies for education.   Training Outline Context, Leadership, Support, Operation, Performance, and Improvement: QMS Requirements. Auditing standards. Auditor responsibilities and roles. Setting up an internal audit. Carrying out an audit. Presenting audit findings.   Who Should Attend Top management. QMS managers and officers. QMS internal auditors. Management system professionals and consultants. Anyone interested in Quality management system.

• Type Of Energy: Electrical
• Type Of Service Provider: Safety Audit Service
• Usage/Application: Industrial
• Service Location: Local Area
• Service Mode: Offline
• Features: Timely Rendered