Industrial Pump Dealers in Banaskantha

We are offering 125mm (5") Borewell Submersible Pumps that features corrosion-resistant graded cast iron motor housing for utmost protection. Sturdily constructed, our Borewell Submersible Pumps have special solder joint between wire and cable, epoxy coated rotor to protect stamping against corrosion and dynamically balanced impellers and rotors. Borewell Submersible Pumps, offered by us, have special magnet provision for fighting against free metal content in motor. Specifications : CRND M47 electrical sheet stamping with C6 coating for low power consumption and long lifeStainless steel 420 grade rotor and pump shaftsFG-260 graded pump Bowl for better performance and long-lifeSS 410/Bronze ImpellersSpecial Carbon-Teflon pad thrust bearingSpecial designed spring action pressure equalizing diaphragmSand Slinger/oil Seal for better protection of motorSpecially processed 3 layered (polyster + 2BOPP) winding wireLTB-4, Leaded Bronze bush with optimum wear resistance.Specially designed key type rotor assembly with stamping locking provisionHardened and Burnished rotor sleevesHardchromed pump sleeves for protection against wear and corrosion Powder coated Forged T-Bolt Features : IS 8034:2002 & IS 9283:1994 BIS certified models5-Star rated Energy efficient pumpsets easy to dismantle and repairAvailable from 3.0HP to 15.0HP in Three phase and up to 7.5HP in single phaseAlso Available in NEMA standard mounting dimensionsBuilt-in NRV valve to reduce risk of water harmmeringStainless steel casted and fabricated pumps are also available Bare pump with 50ft head (5RH series) are also available in complete SS constructionTurbo series motor able to working wide voltage range (250-415V)Low Voltage (180-350V) motors are also availableSpecially designed high thickness corrugated packing to protect against damages during transportationComplete body in SS Construction or Special construction option for corrosive applications, including acids, pH and seawater.

• Type: Mono Submersible Pump
• Application: Hospital
• Fuel: Water Field
• Power: 0.5 HP To 10 HP

We are engaged as a Manufacturer, Supplier and Exporter of Open Well Submersible Pump. We make Open Well Submersible Pump available in varied specifications. The quality control department of our company is involved in the continuous development of technique to improve the functioning of Open Well Submersible Pump provided by the company. We provide Open Well Submersible Pump at the most competitive prices in the market.   Specifications: HP / KW Rating -  0.5 to 10 HP / 0.38 to 7.5 KW Discharge Range -  Upto 1750 lpm Head Range -  Upto 60 Mtrs. Phase  -  Single Phase / Three Phas

A gas seal type is also available which is suitable for handling heavily corrosive liquid, liquid liable to polymerize or highly concentrated slurry liquid. The construction is basically identical with that of the above Slurry Handling Type with a Mechanical Seal and the feature of this type is that a gas chamber has been installed between the pump unit and motor unit. The pump unit has totally been separated from the motor unit with the gas chamber, thus banishing a fear of the mechanical seal wearing out or corroding by handled liquid.Application Ideal for use in light slurries with solids upto 5%. Operating Range Flow : 1 to 500 m3/hr Head : upto 140m, higher head upon request Temp : -80 to 100o C Pressure : atmospheric to 15 kg/cm2

• Driven Type: Electric
• Warranty: 1year
• Application: Water Solution
• Suction Lift: Up to 7 m
• Impeller: Brass
• Mechinical Seal: Open
• Wire: Copper

• Flow upto: Max. 100 m3/h
• Head upto: Max. 100 m
• Max. Motor Power: 60 HP
• Temperature Range: -35T to +250°C
• Max. Working Pressure: PN16 /PN25
• Max. Kinematic Viscosity: 0.5 to 350 mm2/s
• Solid Handling Range: 5% hard Solids and 150 microns diameter
• Flange Class: Class 150 / Class 300
• Drive: Long Couple
• Impeller Type: Close
• Magnets: Ferrite/ Rare Earth/Specially Designed

• Brand Name: FLOWPROOF
• Shape: Round
• Color: Silver
• Application: Pump Use
• Size: 16mm

face:- sic/sic  elastomer:- viton

• Power Source: Solar
• Power: 3 HP
• Warranty: 12 Months
• Frequency: 50 Hz
• Motor Type: DC
• Usage/Application: Agriculture
• Open Circuit Voltage: 90-140 V
• Maximum Input Current: 8.2 Amps

Rotating stationary ring design makes it suitable for high speed application & avoids critical requirement of stuffing box face squareness. Both the faces are having strong positive drive & locking arrangement which make seal very strong and sturdy. Thermodynamic circulation grooves inscribed on the rotating faces boost the cooling of the sliding faces by reducing the coefficient of friction and protecting the seal against thermal over loading. Increased collent flow effected by the pumping screw & the fluid guiding channel combine to force the cold water into the gap between dynamic ring & stationary ring, blowing out gas bubbles and dirt particles & picking up frictional heat. In view of risk dynamic distortion because of high sliding velocity of over 25 msec the springs are located in the stationary part.

• Head: Up to 55 Meters
• Temperature: 0° C to 150° C
• Pressure: Up to 5 kg/cm2
• Capacity: Up to 110 Cu Mt / Hr
• Speed: Up to 3500 rpm

Reliability   The pump are hydraulically designed for maximum efficiency. Every pump passes through stringent process & quality control plans and is designed to give longer life with consistent performance and trouble free service.   Application   Water transfer hot & cold water. Cooling tower heat exchanger. Sea water textile id Paper ind. Food ind Laminate ind Salt ind. Circulation transfer petroleum ind. Pharmaceutical ind dyes & pigments ind. Jet dyeing chemical process. Chemical Process Industries. Cement Agriculture Fiber.   Specifications

• Brand Name: Maschio Gaspardo
• Functions: Primary Tillage, Inversion of Soil Layers, Burial of Crop Residue and Weeds

BENEFITS Hydraulic reversible plough. Uniform working depth. Superior burial of residues (skimmer suggested). Quick soil penetration even in hard soil. User-friendly setting. High reliability. Low maintenance.   ADVANTAGES Quick setting by parallelogram system. Step-less adjustable working depth up to 45 cm. Adjustable working width with 3 levels. Shear bolt safety system. Reversible share point. Optional accessories - front & rear mounted depth wheel, skimmer, MB deflector, 4 MB kit. Suitable for 55 to 100 HP tractors.

• Head: upto 45 m
• Discharge: upto 50 lpm
• Power Rating: 0.5- 1HP / 0.37-0.75 KW
• Power Supply: Single Phase

Front Suction Regenerative Self Priming Pump APPLICATION : Domestic Water Supply, Hotels, Hospitals, Garages, gardens, Industrial Solar heating System & Pressure boosting.

• Brand Name: LEADER

We are offering 8 " submersible motors. 8"leader water lubricated motors are rewindable upper & lower base are available in cast iron and ss 304 or ss 316. Stator shell is of ss202 ss 304 motor shaft is of ss 420 grade or above flange and shaft protrusion as per nema standard available degree of protection: ip 68 max water temperature: 50°c starth: max 30 allowable voltage variation: +6%-10% water lubricated radial and thrust bearing bearings: radial &thrust water lubricated max depth immersion: 350m mounting is vertical horizontal motor cable length 3 m3 core cooling flow: v 0.2 ms versions three phase 7.5 kw to 93 kw, 380-400 volt 50hz three phase 2.2 kw to 30 kw, 460 volt60 hz other voltage and frequencies are also available on demand

• Type: Centrifugal Monoblock Pumps
• Weight: 100-150kg
• Color: Grey, Light White, White
• Voltage: 110V
• Condition: New
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Application: Deep Well Pumping, Household, Industry
• Automatic Grade: Manual

• Flow up to: 100 m3/h
• Head up to: 100m
• Max. Motor Power: 30HP
• Temperature Range: -35 Degree Celsius to +250 Degree Celsius
• Max. Working Pressure: PN16/PN25
• Solid handling Range: 5% - 150 micron
• Flange Class: Class 150, Class 300
• Drive: Close Couple
• Impeller Type: Close
• Magnets: Ferrite, Rare earth, Special Magnets

• Brand Name: Groz
• Model: Vgp
• Max Flow Rate: 2.00 G/ Stroke
• Head: Bucket Type
• Pump Material: Steel

liquid nitrogen pump Nitrogen makes up 78 % of air and is able to displace oxygen. This explains why nitrogen is used in particular for applications where oxygen is undesirable. In cryogenic liquid form, nitrogen is an efficient coolant.

agriculture power sprayer, Spray Pump, Rotavator, rotary garden tools

Petrol Pump