K. P. Enterprise Palanpur, Banaskantha, Gujarat

Features Specially designed Manifold assembly to prevent any scratching on bottom of well Auto rinse facility while shut down Continuous aspiration to prevent overflow Removable manifold Built-in stabilizer Ability to wash single strip of 8 wells Auto detection of bottom of well and collision prevention User programmable soak time, wash cycles and dispensing volume Waste bottle full warning with audible alarm On Board two plate incubator at 37 °C with programmable timer

Power : 50 Watts/ 115 - 240 Volts ± 1 O %, 50/60 Hz.

Reagent Tray 26 Open positions 13 Positions for 10 ml bottles 13 Positions for 30 ml bottles 0 Reagent tray cooled to 10 to 15 C below the ambient temperature Reagent Probe Reagent probe volume 50 to 500 μl Preheated probe with liquid level detection Probe cleaning : both internal and external Sample Tray 26 Open positions for sample/standard/calibrator/control Can adapt primary tubes and pediatric sample cups STAT sample priority Sample Probe Sample probe volume 2.5 to 30 μl Probe with liquid level detection Probe cleaning : both internal and external Reaction Tray 50 disposable cuvettes Reaction volume : 200 μl / test Reaction temperature controlled at 37°C + 0.5°C Quality Control Levy Jenning (L-J) Graph Westgard Rules Quality Control Pediatric Cup for Q. C. Cuvettes Disposable cuvettes Easy loading cuvettes Ten cuvettes in each sector Optically matched cuvettes Software Features Windows based user friendly operation Online status of reagent, sample, and reaction system Real time monitoring of reaction curves Real time diagnosis of system status Turbidimetric Reagents With Smart Calibration Key Test HbA1c, CRP, RF and ASO in a Cost Effective Way No calibration required Saves time & money and avoids errors of calibration Great accuracy & precision Reagent Features Ready to use liquid stable reagents with long shelf life Two reagent system Fine micro size latex particles that do not settle down Micro volume reduces cost per test Reliable results correlating with gold standard methods Convenient pack size Features Discrete, Random Access, Fully Automated, Compact, Bench Top Model 100 Tests/Hour Throughput Dual Probe, Individual Probes for Sample and Reagent Automatic Probe Cleaning and Liquid Level Sensing Cooled Reagent Compartment Q.C. with L.J. Plot and Westgard Rules STAT Sample Capability Disposable Cuvettes Built in Computer Non Vacuumised Waste/Wash Bottles   Technical SpecificationsSystem Information Type of Tests : Routine & Special Biochemistry Enzymes, Substrates, Drug Assays, Serum Proteins Analysis Mode : End Point, Fixed Time, Kinetic, Linear/Non-Linear Multipoint Calibration Programming : Open System for User Defined Profiles and Calculations Optical System Absorbance Range : 0.000 to 3.000 Abs. Unit Filters : Interference Filters 340, 405,450, 510, 545, 578, 630, 700 nm + 2 Optional

Power : 300 VA

Brand Name : Smara

Features Designed to perform all routine tests such as PT, APTT, TT, FIB and clotting factors Results are both printed and displayed in seconds and in concentration Data is printed and stored with RATIO and INR values Dry block incubator for 37 degree centigrade with multi timer Uniform mixing of Sample & Reagent with magnetic stirrer Automatic sensing of cuvette insertion Automatic sensing of dispensing of Reagent that triggers the reaction Facility to enter clinic name Prints and stores calibration graph

Temperature : 37°C

Light Source : LED

Power : 50 Watts / 115-230 Volts + 50-60 Hz

Weight : 3 Kgs. (Approx)

Features Accommodates different microplate geometries U, V & Flat Plate shaking facility with variable speed and duration Ability to read plate within seconds Digital light control with unique circuit for long lamp life Bichromatic readings Flexible controls and calibrators positioning Storage of calibration curves & controls External printer connectivity Patient report with PID & name Various Graph curve fit mode : Linear, Point to Point, 4 parameter log regression, Cubic Spline, Polynomial with scales such as Log Abs / Conc, Logit Abs / Log Conc, Abs / Conc, Log Abs / Log Conc etc. Matrix mode for result printing Storage of plate results Data transfer to computer with easy view of results in Excel format   Technical Specification Optical System Linear measurement range : 0.000 to 3.500 absorbance units(A)  Photometric accuracy : ± 2 % or 0.007 whichever is higher from 0 to 1.5 A, ± 3 % from 1.5 A to 3.5 A Drift : <0.005 A/hr Resolution : 0.001 Light source : Halogen Filters Type of filter : High quality narrow band interference Wavelength : 405, 450, 492, 630 nm & two optional Half bandwidth < 10 nm Selection : Automatic by stepper motor Memory Programs : 250 tests Results : 9600 patient results retrieval Assay wise, Patient wise Printer : On board thermal 52 columns, maintenance free Display : Human machine interface : TOUCH PANEL & KEYPAD, 7" Graphics Color Display Power : Voltage : 115 — 230 Volts ± 10%, 50 — 60 Hz Computer Interface RS232 Serial Port : 9600 baud, 8 data, 1 stop, no parity bits USB Analysis Modes : Absorbance, Cut-off, Multi-standard, % Absorbance, Single standard, Uptake, Ratio Curve Plotting : Graphical representation on printer & display Plate Carrier Movement : Precisely through stepper motor Dimensions in mm (Ixbxh) : 405 x 380 x 280 (Approx) Weight : 10 kgs. (Approx)

Voltage : 115 — 230 Volts ± 10%, 50 — 60 Hz

Features Direct access to more than 200 tests through test keys Maintenance free peristaltic pump Unique circuitry for long lamp life Triple cuvette system Real time graph with online reading Multi standard calibration & memory Automatic calibration against standard Displays actual temperature on screen Levey jennings and standard deviation graphs Sample carry over prevention facility Robust system with built in stabilizer Patient report with PIO & name User friendly software USB interface   Technical Specification Optical System Linear measurement range : 0.000 to 3.000 absorbance units (A) Photometric accuracy : ± 2 % or 0.007 whichever is higher, from O to 1.5 A, ± 3 % from 1.5 A to 3.0 A Optical measurement : Photodiode Light Source : Tungsten halogen Filters Type of filter : High quality narrow band interference Wave length : 340, 405, 510, 546, 578, 630 nm & two optional Flow Cell Sipping volume : upto 1000 μI Triple cuvette system : 18 μI flow cell 10 mm square cuvette Round tube for coagulation Memory Open tests : 250 tests Results : 2500 patient results QC : 30 QC results/test Analysis Modes Biochemistry & Turbidimetry : Absorbance, End Point, Fixed Time, Kinetic, Differential & Ratio Coagulation : PT, INR & APTT Display Human machine interface : TOUCH PANEL/ KEYPAD 5" Color Graphics LCD

Voltage : 115 - 230 Volts ± 10%, 50 - 60 Hz

FeaturesCoagulation Four independent programmable coagulation channels for faster throughput. Display online results of all four channels simultaneously on single screen. Designed to perform all routine & special tests such as PT, APTT, TT, Fibrinogen, Factor II, V, VII, VIII, IX, X, XI, XII. Uniform mixing of Sample & Reagent with magnetic stirrer. Automatic sensing of sample/reagent dispensing to start the measurement. Multipoint Calibration curve with user entered standard dilution % in FIB and Factor Assay. Photometer : Independent channel for Photometric assays. Multipoint calibration curve with maximum 7 calibrators for Photometric assays. Chromogenic assays antithrombin III (AT-III), protein C (PC), protein S (PS), D-dimer. Common : Effective temperature regulation system. Robust system with built in stabilizer. Storage Capacity of 250 open tests with QC and more than 2500 results. Independent memory for Coagulation and Photometric mode. Unique circuitry for long lamp life. Human machine interface : Touchpad, Keypad. Quality Control with Levey Jennings and standard deviation graphs. Technical SpecificationsCoagulation Measuring System: Photometric / Mechanical Optical Measurement: Photodiode Measuring Volume: 150 μl Sample & Reagent Mixing: With Magnetic Stirrer Dry Block Incubator : 24 Positions Temperature at 37 c Light Source: LED Analysis Mode: PT, APTT, TT, Fibrinogen, Factor Assay (Factor II, V, VII, VIII, IX, X, XI, XII) Results Displayed in: Seconds, Ratio, INR, Concentration and % Photometer : Linear Measurement Range : 0.000 to 3.000 Absorbance Units (A) Photometric Accuracy : ± 2% or 0.007 Whichever is Higher, From 0 to 1.5 A, ± 3% from 1.5 A to 3.0 A Optical Measurement : Photodiode Cuvette Volume : 500 μl Filters Interference : 405, 630 nm Light Source : Tungsten Halogen Warm Up Time : 90 Seconds Analysis Mode : Absorbance, Kinetic, End Point, Fixed Time

Features Discrete, Random Access, Fully Automated, Compact, Bench Top Model Dual Probe, Individual Probes for Sample and Reagent with Liquid Level Sensor Onboard Cooling for Reagent Tray Onboard Laundry Minimal Water Consumption, less than 2 Litres per Working Hour Permanent Optical Glass Cuvettes Non Vacuumised Waste/Wash Bottles Q.C. with L.J. Plot and Westgard Rules Dedicated Onboard Mixer for R1 & R2 STAT Sample Capability Built in Computer

Power : 300 VA

Our new generation priecount with simplified operation and precise dilutor technology ensures results are of highest quality.   Features Intuitive Software Low consumable cost Accurate measurement of sample by volume and time method Floating discriminator Innovative technology High precision maintenance free dilutors Easy operation and maintenance Accurate and reliable results Liquid level sensor for Diluent, Lyse and Rinse bottles   Whole Blood Linearity Range WBC 0.2-99.9 x 10 /μl 6 RBC 0.30-7.00 x 10 /μl HGB 0.1-25.0 g/dl 3 PLT upto-999 x 10 /μl HCT 10.0-60 % Operating ConditionsPower 115 – 230 Volts AC ~ 50 Hz +/- 10% Proper Earthing / grounding <5 Volts Power 100 VA EnvironmentalTemperature 18 to 40 ° C Relative Humidity up to 80%

Display : Color LCD with Touch Screen

Weight : 18.5 kg. (approx)

Weight : 9 kg

Automation Grade : Fully Automatic