ABB DC Motors Dealers in Bangalore

The Electric Motor, offered by us, is manufactured with great excellence, hence is quality assured. Our electric motor has the maximum speed of 1400 rpm. This electric motor is known for its low maintenance and hassle-free performance.

We make available, Electric Motor, which has an ambient working temperature ranging from -15 to 40 degree Celsius. This aluminium alloy component is die cast on the 400-ton bhuler die casting machine.

• Nominal power (kW): 2,4,7

SEM is a leading designer, manufacturer and supplier of AC and DC permanent magnet servomotors to system integrators and large OEMs worldwide, IRT is specialised in the development and commercialization of servo-drives for DC, brushless and asychronous motors. Swiss made, today, about 200'000 IRT devices bring electrical motion all over the world, Fully Digital Drive for brushless and asynchronous motors.

Insulation class ‘F’ with temp rise limited to Class ‘B’ Degree of Protection IP 55 POWER (HP)  :  Single  :  0.25  -  5.0                       Three  :  0.25  -  1000

• Brand Name: ABB DC SERVO MOTOR
• Place of Origin: Karnataka, India

We are the main supplier of this product.

We are Offering Electric Motors like TEFC inductions motors, Flameproof Motors, Crane Duty Motor, Brake Motors, Geared Motors etc.

We are offering electric motor. Casting for body frame, end shields, bearing shields etc., are made out of quality graded grey iron casting which assures a long years of utility shaft – en 8 steel rotors – pressure die cast and dynamically balanced stator core pack – built from low loss electrical grade steel laminations. The stator winding consists of modified polyesterpolyesterimide base insulated copper wire to give high conductivity and impregnated with synthetic resin to attain high die electric properties windings are tested on surge comparison tester die cast aluminium body for frames 56 to 100 all motors are painted with rust proof epoxy paint prompt after sales service.

FEATURES   Feedback: Resolver/Encoder/Hall sensors High Torque to Weight Ratio Nominal range - 0.1 to 10Nm, 10000rpm Segmented Armature Designs Coreless Armature Designs Higher Thermal Rating TYPICAL APPLICATIONS: AVIONICS & SPACE   Electromechanical Actuation Scanning & Positioning Mechanisms Cargo Transportation Robotic Actuation Systems Fuel Pump & Servo Valve Applications Fuel Systems & Environmental Control Systems

• Frequency: 50 Hz±5%
• Phase: 3 phase
• Type: Induction Motor
• Rated Voltage: 415V
• Power Output: 0.37 kw
• Warranty: 6 Months
• Protection Class: IP55
• Model No: EF60
• Mounting: Foot Mounted
• Body Material: Die Cast Aluminium
• Combined Variations: ±10%
• Ambient Temperature: 0-50° Celcius
• Frame: RC80
• Casing: Squirrel Cage

• Capacity: 0.25 HP - 20 HP
• Speed: 2P/ 4P / 6P / 8P
• Duty: S1, S4
• Mounting: Foot / Flange / Foot cum Flange

We are supplying for various applications in printing, packaging, textile process equipments material handling etc. Our motors manufactured accordance with the IS Standards.   

We are offering electric motor. essence offers standard ac motors operate by simply connecting a capacitor and supplying power from a commercial power source. Standard ac motors include the basic induction motor and reversible motor. In addition, oriental motor offers electromagnetic brake motors, synchronous motors, torque motors, ac speed control motors and watertight motors to meet specific application requirements. Oriental motor offers a wide variety of standard ac motors in frame sizes ranging from 1.65 inch (42 mm) to 4.09 inch (104 mm) square with output power of 1 w (1/750 hp) to 200 w (1/4 hp). There are two basic types of ac motors: standard induction motors that run continuously and reversible motors that allow for bi-directional operation. Ac motors with additional functionality are also available. These types of motors include: electromagnetic brake motors to hold loads in a power-off situation; clutch & brake motors for quick starts and stops; synchronous motors and low-speed synchronous motors for a fixed speed in synchronization with the power frequency; watertight motors for applications were the motor is splashed or washed with water and torque motors for tension control and winding applications. constant speed motors  induction motors  reversible motors  electromagnetic brake motors  low-speed synchronous motors • torque motors • watertight, dust-resistant motors gearheads  parallel shaft gearhead  right-angle gearhead, hollow shaft  right-angle gearhead, solid shaft.

Mieco Pumps and generators in Bangalore offers specially designed products for Electric Motors and its parts. We are Best Pump Manufactures in Bangalore. We provide pumps at reasonable rates and is used as a driving force and perform greatest applications and Best Pump Manufactures in Bangalore. It is made as per the industry principles and specifications in order to meet with their requirements. It is made by using best quality of material and is efficient and effective in performance.   Electric motors are the driving force behind every equipment, and hence it has to be the most reliable as well as rugged, so that they may be used for continuous duty applications. Mieco Pumps and Generators Pvt. Ltd Bangalore have a host of collections in electric motors,and also Standard Motors,  flange motors, brake motors, extended shaft motors, vertical motors, geared motors, Foot cum flange motors, crane duty motors, fractional hp motors, flame proof motors,  Energy Efficient Motors, dual speed motors,  and special duty motors with HP as no bar.   Electric Motors are widely used in computers and now there are probably two in your computer for starters, one rotating your hard drive around and another one powering the cooling fan..These electric motors are suitable for a variety of industrial, domestic, agricultural and other general principle applications.   If you're sitting in a guest room, you'll find motors in hair dryers and many playthings; in the bathroom, they're in concentration fans, and electric shavers; in kitchen, motors are in just about every appliance from clothes washing machines and dishwashers to coffee grinders, microwave ovens, and electric can openers. Electric motors have proven themselves to be among the greatest designs of all time.   Most of our motors are ISO and CE certified, and can be available in CI or Aluminum Body. Mieco Pumps and Generators Pvt. Ltd Bangalore have been supplying motors to  Government Departments,Defense Establishments, top rated MNC’s, Railways as well as many OEM’s for their machines.Best electric motors are in available Mieco Pumps.   Every day at mieco is a new opportunity to cooperate with the best minds in the country, to develop solutions that make difference to millions of people.our philosophy is to satisfy customers to the best of our ability by providing them with creative and competitive solutions.

• Frequency: 50Hz ±5%
• Relative Humidity: Up to 100%
• Voltage: 415V±10%, 3 Ph.

The Kirloskar Electric organization comprises nine manufacturing locations and 34 sales offices spread across the country. We have a large network of spare parts dealers and service centres. This enables us to provide premium products, exemplary systems & services at competitive rates to our clients.

We offer motor, sync gear, 3 rpm, cw. Input voltage: 220v ac to 240v ac rotation direction: cw no. Of clutches: 0 operating temperature range: -20°c to +80°c input power: 4w external diameter: 64.4mm ip nema rating: ip50 rotational speed: 3rpm shaft diameter: 7mm shaft length - metric: 19mm stall torque: 18n-m supply frequency: 50hz termination type: wire leads

• Speed: 3000 RPM
• Phase: Three Phase
• Country of Origin: Made in India
• Power: 1 HP
• Material: Mild Steel

We make sure that the offered lot complies with the stated quality norms, thus check the product quality on several stages. Hailing from Karnataka(India), our company is engaged for years in providing the best grade products in the industry.

• Driven Type: Electric
• Application: Industrial Use

Electric Motors are energy efficient induction motors, built with robust construction, ideally suited to perform in any operating conditions. These are ideally suited for industrial, textile, machine tools, compressor, marine, material handling and agricultural applications.

Abb offers a comprehensive range of reliable and high efficiency motors and generators for all applications.

Continuous rating shock-proof weather proof totally emclosed type as per IP-55 and suitable for out door mounting. Capacity 0.5 HP to 15 HP.

Electric Motor, Outboard Motor, Universal DC Motor, Universal AC Motor

Electric Motors, Pumps, Instrumentation Cables, heat shrink cable

Electric Motors, AC Motors, Worm Gear Boxes, single output shaft

Electric Motors, Welding Electrodes

Electric Motors, Centrifugal Jet Pumps, Submersible Pump Set, AC Motors

Electric Motor, Submersible Pump, Wet Grinder

Electric Motors, Variable Transformers, Servo Motor, Industrial Engines

Electric Motors, Pumps, Submersible pumps

Electric Motors, ark welding machine

Electric Motor, cnc units, milling units, multiple spindle, tapping units