AC Drive Control System Dealers in Laggere, Bangalore

The circuit is designed for AC DC supply including Anti Pumping contactor. The type tests conducted by us in CPRI Bangalore is as follows Lighting Impulse & Power Frequency Voltage Withstand Test (Dry) as per IS 34271997 RA IEC 62271-2003 LI 75kV (peak) & PF 28kV. Temperature Rise & Milli volt drops test on 1250A VCB as per IEC 62271-100-2003 . Short- time & peaks withstand current tests as per IEC 62271-100-2001 25 .61kA rms for 3 .07 secs and peak 69.42kA. Measurement of the resistance of the main circuit & Mechanical endurance test for 1000 operations

It is a flat, vertical where control or monitoring instruments are displayed or an enclosed unit that is the part of a system that users can access, as the control unit of a system.

Our company designs an exclusive range of change over panels, which are made of best quality raw materials to ensure durability and efficiency. Our change over panels serves various industries̢۪ requirements. These are used for changing over from DG set to mains and vice versa. The change over panels has the castle lock facility that prevents from accidental change over. These can take up to 415V and are provided with IP54 protection and fabricated as per IS standards. Characteristics : Can be changed to generator mode automaticallyWhen EB supply resumes it goes back to EB modeSwitches off the generator automaticallyShock proofDurableStrong and sturdyEasy to operate and install Applications : FoundriesApartmentsTextilesSugarChemical industries

Wè provide high efficiency off grid solar power panelsfor your house, industry. need based solutions are executed based on your requirements. n choice.   Additional Information : Minimum Order Quantity: 1 Kilowatt

Mahaveer Fire Safety is trusted by clients for supplying Fire Alarm Repeater Panel that is sophisticatedly designed by the experts. To cater to the diverse requirements of the clients, we supply, the Fire Alarm Repeater Panel in the market in varied specifications. The efficient performance of these Repeater Panels has earned us a huge list of clients in nationwide markets. MAIN FEATURES � Built in Power supply � Built in Buzzer - Audio Alarm � Mute Switch - To silence Audio Alarm � User friendly display - Back lit LCD (Liquid Crystal Display 4x20)80 Characters � LCD gives - Zone Number, Floor Number And Block details where exactly Fire is occurred. TECHNICAL SPECIFICATION Mains Input Voltage : 230 V A.C, 50Hz +/- 10V Secondary Voltage : 5V.DC Normal current consumption : � 50mA @ 230V And � 100mA @ 5V D.C Maximum current consumption : � 200mA @ 230V And � 500mA @ 5V Enclosure : CRCA Fabricated Wall mounting type Dimensions : 300(H) x340(L) x100(D) mm

• Country of Origin: India
• Type: Electrical Panel
• Material: Metal, Steel
• Shape: Rectangle, Square
• Application: Factories, Home, Industries, Mills, Power House
• Color: Gray, White
• Feature: Excellent Reliabiale
• Phase: Double Phase, Single Phase
• Brand Name: ADITHYA

METERING PANEL BOARD CRCA SHEETMETAL CONSTRUCTION

• Condition: New
• Material: Stainless steel
• Power: 220 V
• Warranty: 1 Year
• Phase: Three phase
• Use: Industrial

We offer finest quality voltage transformers. Voltage Transformer is generally used in an electronic circuit that requires constant voltage/current or VA Rating. Our Industrial Voltage Transformer is designed for industrial applications where electromagnetic devices such as relays & solenoids are used. This insulation is used to electrically insulate turn to turn windings, primary to secondary windings and ground. The transformer maximizes in rush capability and output voltage regulation when electromagnetic devices are initially energized. Voltage transformers are vacuum impregnated with one component solvent less UP impregnating resin for thermal class 200(H) and oven-cured, which seals the surface eliminates moisture. Features : Provides strong mechanical bondOffers protection for environmentVacuum impregnatedDurableSturdyCorrosion resistant Types of Encapsulation : Tape WoundResin cast

• Phase: Single Phase
• IP Rating: Ip54
• Brand Name: Navago
• Usage/Application: Street Light Controller
• Voltage: 230 V
• Rated Frequency: 50 Hz

The Electrical Control System offered by us has a worm reduction gear box, motor and frequency converter, control panel and pendent. In plano milling mode there is a table to move from 30mm per minute to 400mm per minute in step less range. Its unit has all require cables, output fittings, chain and sprocket, etc. Our Electrical Control System has systemized controls for Forward /Rewind /Stop / Rapid Stop selectors for table feed and similar start/stop and forward /rewind selector for spindle motor is there. This Electrical Control System comprises of Spindle RPM and table feed rate can be easily changed by using the potentiometer given on the of the machine. There are also the calibrated voltmeters giving the spindle and table feed rate will be provided. The relevant interlocks and sensors / limit switches, etc. will be provided. It has interlocks by operation of planner motor at the time when clutch of Plano-milling is positively disengaged, Table stroke limits, Spindle rotation-table feed interlocks, etc. The necessary cabling material like cables, hoses and connector's for cabling from panel to pendent, motors, limit switches; clutch, etc. had to be provided. AC Motor and Gear box assembly : AC Motor and Gear box assembly has a AC induction motor of high quality, fit with external axial fan for forced conversion. It encourages proper heat dissipation, when the motor is running continuously at all RPMs. The AC Motor and Gear box assembly will drive the input shaft of a reduction gear box. There is a slip frees suitable timer for the belt drive. The Reduction gear box will be there to make like Elecon /Radicon/ Cyclo, etc.Complete control system : for the planomilling operations requires the given table. It includes controls for spindle, table feed and relevant inter locks. All the controls will be putted in a separate electrical cabinet on floor near to reduction drive unit. The elements used are MCBs, contactors, cables, etc. vital for the control system, of standard reputed makes easily available in India like Siemens/ L&T/ Technic/ Indo kopp, etc. Features of Electrical Control System Excellent durabilitySturdy constructionHigh performanceEasy installationEnergy efficient

• Type: Solar Electric Panels
• Certification: CE Certified
• Application: Electricity, Home, Hotel, Toproof
• Weight: 10-100kg
• Condition: New
• Power Source: Solar
• Efficiency: 90%
• Warranty: 5Year
• Operating Voltage: 12V, 24V
• Solar power: 1Kw, 250W
• Country of Origin: India

Our LT Panels have the largest satisfied customer base. Dedicated to providing environment friendly quality solutions and commitment to delight customers with unique value propositions.

• Type: Electrical Panel
• Material: Metal
• Application: Industries
• Feature: Dust Proof, Excellent Reliabiale
• Warranty: 1 year
• Conditon: New
• Minimum Order Quantity (MOQ): 1 Unit

• Size: Customizable
• Type: Panel enclosures
• Material: CRCA / SS
• Length: Customizable
• Application: industrial
• Color: Customizable
• Width: Customizable

Control panels: PLC Based, relay &contactor logic panels, VFD / Varable Frequency Drive panels, Direct online panels.

• Pattern: Plain
• Finishing: Polished
• Feature: Fine Finished,Water Proof
• Thickness: 10-15mm,15-20mm,20-25mm
• Application: Advertising,Furniture
• Color: White
• Shape: Rectangular
• Type: Wpc Board
• Material: Wpc
• Length: 8 Ft.
• Width: 4 Ft.