AC Drive Control System Dealers in Nagarbhavi, Bangalore

• Size: Multi Channels
• Type: Control Panel Boards
• Voltage: 220V
• Body Material: Mild Steel
• Power: 1-3kw
• Power Source: Electric
• Phase: Single Phase
• Country of Origin: India
• Warrenty: 1 Year
• Autoamatic Grade: Semi Automatic
• Brand Name: SiliconShelf
• Material: MS

• Material: Cement
• Usage/Application: Residential
• Color: White
• Pattern: Plain
• Moisture Content: 4-8 %

  AMF panel and generator packages are designed to provide emergency power during mains supply failure. During operation, the control panel of the AMF monitors the mains entering the building. If a mains failure occurs, the panel will disconnect the mains from the load, the generator is started and its output connected to the load. (The load being appliances, lights, etc in use within the house/office/factory at the time of mains failure). The generator continues to supply the building until the mains supply returns. The generator then automatically disconnects, stops and the mains is re-connected to the load. The AMF panel reverts to the standby mode ready to respond in case of another mains failure. Operation With the generator in 'Auto' mode, the incoming main is monitored continuously. If the mains voltage falls outside the preset limits, a 'mains failure' has occurred and the process of starting the generator set is initiated. Once the mains failure is recognised, the contacts are released to disconnect the load from the mains. The 'mains available' and 'mains on load' lamps extinguish. There is a pre-set and adjustable time delay before the generator is started. This avoids unnecessary starting of the generator when very short duration mains breaks occur e.g. 2 or 3 second breaks due to lightning strikes. After the delay, the engine fuel solenoid / ignition system is energised. A pre-heat period begins for generators fitted with indirect injection diesel engines. The choke is operated on petrol-engined sets. The starter motor relay energises and the engine is cranked for a pre-set period (typically 10 seconds). If the engine fires up and the speed increases through the 'crank-cut' threshold, then the starter motor is dis-engaged. Alternatively, if the engine does not start during the first crank period then the starter de-energises for an equal rest period before energising for another attempt. If the engine has not started after the last 'crank' period, then the engine fuel solenoid / ignition is de-energised and the generator is deemed to have failed to start and the appropriate annunciator is illuminated. Assuming that the generator has started during one of the attempts, the alternator output is checked to ensure that it is within specification. If so, then the generator contactor is energised and the load is supplied from the generator. In normal circumstances, the period from mains failure occurring to generator supply being connected is about 20 seconds. During generator operation, the engine oil pressure and temperatures are monitored and should an abnormality occur, the generator will immediately be shutdown and the appropriate annunciator illuminated. When the mains supply returns, the mains available lamp is illuminated within specified limits. The main is then monitored for a pre-set time to ensure that the supply is stable. The generator contactor is then de-energised and the mains contactor energised so that the mains supply is restored to the load. The 'alternator available' and 'alternator on-load' lamps extinguish and 'mains on load' lamp is illuminated. A short break in approximately 1 second occurs whilst the changeover is complete. The generator is 'run-on' for a cooling down period (adjustable up to 30 minutes) before the fuel solenoid / ignition system is de-energised and the engine stops. The operational cycle is then complete and the generator returns to a standby condition. During this time the starter battery is maintained in a charged condition by a 'trickle' charger supplied from the mains. 

Wè provide high efficiency off grid solar power panelsfor your house, industry. need based solutions are executed based on your requirements. n choice.   Additional Information : Minimum Order Quantity: 1 Kilowatt

• Size: Available in different sizes
• Type: Single-Phase Control Pane
• Model Number: SP - 01
• Brand Name: High Prior Electricals
• Material: High-quality robust materials
• Application: Residential buildings,, Commercial complexes, Industrial plants, Agricultural setups
• Weight: Available in different sizes
• Color: Multi-color options availabl
• Feature: High efficiency, durability, safety, versatility, user-friendly
• Condition: New
• Packaging Type: Corrugated Box
• Uses: Power management in residential, commercial, industrial, and agricultural settings
• Use in: Electrical power control and distribution
• Usage: Electrical panel control
• Usage/Application: Residential buildings, Commercial complexes, Industrial plants, Agricultural setups
• multi color: Yes
• white black mix: Yes
• Material:: Aluminum Foil-Polyester Tape with 100% Coverage Area
• Types of Property: Durable, efficient, safe
• Voltage: Suitable for single-phase systems
• Frequency: 50/60 Hz
• Enclosure: Weatherproof and dustproof design
• Customization: Available in different sizes and configurations to meet specific requirements
• Manufacturer, Supplier, and Exporter: High Prior Electricals

• Country of Origin: India
• Type: Fire Alarm
• Application: Industrial
• Color: Red
• Feature: Durable, Quality Assured

Backed with rich experience and knowledge, we are considered to be one of the most professional manufacturers and suppliers of Starter Panels. Under the supervision of experienced personnel, these panels are designed as per the international quality standards and norms. We can customize these panels as per the specific requirements of our esteemed clients. Known for offering flawless performance, these panels are appreciated for their compact design, and long service life. These Starter Panels find application in various industrial and commercial sectors.vz

• Short Circuit: SC15S0692 (26.3KA rms for 1 sec)
• High Voltage: SC15S0692 (12/28/75KV)
• Temperature Rise: SC15S0692 (at 630 Amps)
• IP 55: EATD SC15S0692 (Category 2)

With Load Break Switch (3CT’s -3PT’s) Panel Metering & Switching cubicle is manufactured with Zero bushings i.e. the outgoing & incoming cables are provided with the bottom cable entries as per EB’s.The cubicle is divided into four chambers –one for incoming,one for outgoing with LBS,One for CT’s & PT’s and one more for energy meter.The cubicle is dust proof and pilfer resistant / non tamperable.The cubicle is available in 3Ph.4W Systems.Sealing facilities are as per EB Norms.Assembled with suitable bus bars and the Panel is powder coated with 80-120 microns for its inner / outer texture with High Quality Process.   Applications: In CPRI Bangalore is as follows: They are used in Residential / Commercial/Large & Small Industrial Uses.   The HRC fuses used conforms to IS Standards. The Protection /Tripping system is implemented through fuses (stick pin) & relays. The panel is Powder Coated with 60-100 microns for its Inner / outer structure with High Quality Process. Assembled with suitable bus bars and enclosed in durable 14 gauge CRCA sheets designed to endure harsh weather conditions.

I/O Capacity - Up to 48 IO, Extension Unit - 8 Input, 6 Output, Communication - Ethernet - Modbus RTU - Serial, Display - 3.5'' Monochrome  

The fully Automatic control Panel is designed to supply medical gas at a constant pressure from either bank of cylinders into the MGPS. The unit shall have separate pressure regulators for each bank of cylinders and control system that shall be designed for the case of maintenance, cylinders can be changed or the pressure regulators removed for overall without loss of continuity of the gas supply. The system shall be provided with monitoring to detect and display. Running Bank of Operating Running Bank Low Reserve Bank Operating Reserve Bank Low Pipeline Pressure Fault The normal operation of the changeover & control depends on an electrical supply. The design shall ensure that in the event of electrical supply failure there is no distribution to the flow of gas in to the MGPS

Our Fire Fighting Panels run on diesel or electric motors. We source the Panels from the reliable manufacturers who endow these systems with oodles of power. Our name resounds with quality assurance; hence, with each product that we offer, client’s satisfaction follows. So, when it comes to laying hands on premium Fire Fighting Panels, trust us! We are counted amongst the premier Exporters and Suppliers of Fire Fighting Panels in Bangalore, India.

We manufacture, supply and export the best quality Electrical Test Panels. Application: To measure electrical parameters of electronic and magnetic ballast/ chokes, luminaries etc. System Features / Technical Data: Consists of power meter WT210/ WT230 (Yokogawa), Auto transformer, cyclic timer, preset timer, event counter etc Power meter measures supply voltage-current power-frequency-power factor, V harmonics, I harmonics, TIM etc Also measures ballast voltage, open circuit voltage, cathode current, impedance, output frequency of electronic choke etc Testing can be done both in AC and DC voltages. Auto transformers for output fine tuning of supply voltage.

The exceptionally well-informed team assists the clients at every step by making available the precisely developed range of products in unity to their needs. The achievement of the company is devoted to clients who placed their trust on us by continuously procuring from us the Access Control Systems, Software’s and Identity Cards. The company is reckoned in the market as a trustworthy Access Control Systems, Digital Management System, Software’s and Identity Cards, Manufacturer, Exporter & Supplier based in India. We are a reliable name for procuring technologically advanced Access Control Systems. We take extreme care in offering the varied Access Control Systems to the customers in unity to their requirement We Supply Access Control System Softwares ID cards

high quality transformer, Transformer

Instrumentation Panel, Logic Control Panel, thyristor power pack, DC Drives

Electrical Panels, Ac Drives, Electric Motors, Variable Frequency Drives

industrial LV panel boards, telecom products, Relay Starter

metering panel boards, ht load break switch panel, ht metering cubicle

Bats is having highly experience and expertise in providing full-service custom-designed abatement solution for odour control. The innovative engineering concept minimizes the operating costs, enhances the efficiency and most importantly, solves your specific problem. We use the most effective method of activated carbon adsorber in our odour control systems. activated carbon activated carbon is a form of carbon that has been processed to make it extremely porous and thus to have a very large surface area available for adsorption or chemical reactions. A variety activated carbon products is available exhibiting different characteristics depending upon the raw material and activation technique used in their production. activation refers to the increasing the adsorption properties of carbon. Raw materials such as coal and charcoal do have some adsorption capacity, but this is greatly enhanced by the activation process. activated carbon can be produced from carbonaceous source materials like nutshells, wood and coal. The raw material has a very large influence on the characteristics and performance activated carbon.

Electrical Cable, Light Fixture, Pipe Fitting, switchgear component

control desks, Dispensing Robots, AC Motors, DC Drives, pneumatic panels

Access Control System, cctv, Biometric System, intruder alarm systems

Access Control System, Biometric System, CCTV Camera, Public Address System

Transformers, Led Light, Led Down Light, LED Bay Light, Home Light

Elpro offers ETRACS which is essentially a computer based remote energy monitoring and control system which can monitor and control nodes spread over large distances using state-of-the-art wireless communication systems like GSMCDMA. Electrical Loads can be remotely controlled (Switched ONOFF), Status can be verified remotely, date can be acquired and other functions can be performed using Features and Benefits: Etracs can be very efficiency used for Remote wireless tracking, monitoring and operation of street lights in a city. ETRACS will perform the following functions: Switching time program Remote Time based Switching OnOff of Street Lights Remote Energy Tracking and Planning Precise monitoring of Energy consumed for street lighting Monitoring of Faulty Street Lights and ensuring a effective fault repair and servicing system Energy savings upto 50% Winner of Best Practice Award from Govt of Karnataka

alternator voltage regulators, single phase over current relay

3 point locks, canopy hinges, electrical enclosures, Panels, canopy locks

Transformers, Ballasts (Chokes) for MV / SV / Metal Halide, Coils

Access Control System, cctv, Biometric System