AC Drive Control System Dealers in Bangalore

• Breaker: IEC 62271-100
• Current transformer: IS 2705/1992 and IEC 60044-1
• Potential transformer: IS 3156/1992 and IEC 60044-2
• Busbar: IS 5082 for Aluminium
• Sheet Steel:: IS 513
• Cables: IS 694

The Power +V are an Indoor VCB Switchgear Panels of voltage range 3.3kV to 11kV and current ratings from 630A to 3150A. For compactness in panels rated up to 2000A special bus raiser panel is provided with bus coupler panel extended in the rear side. IP4X degree of protection is provided externally and IP2X between compartments. Panels shall have adequate space for terminating large cable sizes. Our 11kV panels are carried out for Internal Arc Test for 40kA for 1 Sec. GENERAL FEATURES Modular & compact for better strength and flexibility in extension. Fully Compartmentalized construction for optimal safety and protection For compactness in panels rated upto 2000A special bus raiser panel is provided with bus coupler panel extended in the rear side. IP4X degree of protection is provided externally & IP2X between compartments. Our design enables adequate space for large cable sizes. Even larger cables and additional runs rear extension is provided for cost effectiveness. Independent exhaust vents for all HT compartment are provided for natural cooling and exit for any flue gasses. Dedicated Circuit breaker compartment as per internationally proven ABB design. Cassette mounted ABB Circuit Breaker with draw out feature for easy maintenance and fail-safe safety. Live parts covered by automatic metallic shutters when breaker is racked out. Electrical anti-pumping design avoids mishaps due to mishandling of the breaker. Additional feature includes a separate Racking in/out mechanism which is provided in the breaker which can change from “test” to “service” positions and vice versa with the cubicle door closed. Only Branded and type tested sub components are used in our panels. Current and Voltage transformers are placed in chamber below Circuit breaker to avoid any kind of flashovers which may damage the breaker. Wiring done with flexible copper cable affirming to IS 694 for Longitivity and Durability. Optional integral earth switch can be provided on the cable side for Earthing. We provide Foundation frame as standard supply All hinged doors are provided with gaskets to keep away dust and water from the electrical components. Multiple guides are provided for safe and sure engagement of fixed and moving contacts. Breaker trolley shall be given along with the breaker panel for maintenance.

We design and develop a range of control desks or control panels that is manufactured to cater to the needs of varied industries including engineering and fabrication. Our precision engineered control desks are mounted with controls, indications, annunciations and other accessories. Made out of 2 mm CRCA steel and used in Control Room for controlling Power Plant Operations. Attributes : Made up of stainless steelProvided with push button, lampsSelected switchesThe front portion is provided for keeping monitor Applications : Steel industriesCement IndustriesRefineryIndustries

• Driven Type: Hydraulic, Mechanical, Wind
• Color: Black, Grey, Metallic, Silver
• Condition: New, Old
• Automatic Grade: Automatic, Manual, Semi Automatic
• Certification: CE Certified, ISO 9001:2008
• Blade Material: GFRRP, Glass-Fibre, Metal, Reinforced Resin, Stainless Steel
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Production Power: 1-5Mw, 10-15Mw, 15-20Mw, 20-25Mw, 25-30Mw, 5-10Mw
• Application: Industrial, Power Station
• Fuel: Coal-fired, Gasoline, Oil, Oil-fired
• Structure: Fire Tube, Water Tube
• Height: 0-10mtr, 10-20mtr, 20-30mtr, 30-40mt

• Type: Automatic
• Color: Red
• Voltage: 220V
• Material: Mild Steel
• Power: 1-3kw
• Power Source: Electric
• Phase: Double Phase, Single Phase
• Item: Warranty

Fire Alarm Control Panels are widely used to control and monitor fire alarm systems through computer. These Fire Alarm Control Panels are connected with control panels, which assist user by providing warning of the affected area. Known for the excellent features, and long serving life the clients can avail the Fire Alarm Control Panels from us at the market leading price. Characteristics Control & monitor the fire alarm systems peripherals Alarm systems peripherals are connected with control panel Provides warning & navigate the fire-affected area Fully solid state Operated with 230V AC & 24V DC Used In Offices Factories Power plants Retail houses

• Material: Mild Steel
• Color: Gray
• Automation Grade: Semi Automatic
• Type: High Voltage
• Frequency: 50hz
• Phase: Three Phase
• Country of Origin: India
• Brand: Unnatthi Control & Equipments
• Rated Voltage: 415 V
• Rated Current: 100 Amp
• Power Source: Electric

Only quality packaging material has been used for the packing of the products that we offer. Moreover, the entire packaging procedure is conducted under the supervision of the experts. Buyers can rest assured; the delivery of consignments will be done within the stipulated time. Our products can be ordered in bulk as well as in retail. Details : Blue Color - Indicates By-Stander Calls Yellow Color  - Indicates Pull Cord activaticn (Call Frcm Toilet ) Red Color  - Indicates the Emergency Calls (Call Frcm Bed Side)

• Size: Customizable
• Type: Panel enclosures
• Material: CRCA / SS
• Length: Customizable
• Application: industrial
• Color: Customizable
• Width: Customizable

Control panels: PLC Based, relay &contactor logic panels, VFD / Varable Frequency Drive panels, Direct online panels.

Started working on ‘Solar Power Systems’ in 2008, since then we have come a long way to be one of the leading system integrator and supplier of Solar systems. We have successfully Installed and commissioned over 1000 KWP solar plants and many more are in pipeline. Now we are channel partner for MNRE.

Wè provide high efficiency off grid solar power panelsfor your house, industry. need based solutions are executed based on your requirements. n choice.   Additional Information : Minimum Order Quantity: 1 Kilowatt

Our LT Panels have the largest satisfied customer base. Dedicated to providing environment friendly quality solutions and commitment to delight customers with unique value propositions.

• Phase: Three Phase
• Current: 6300 A
• Automatic Grade: Automatic
• IP Rating: IP77
• Voltage: 440 V
• Features: Excellent Quality,Robust,Easy installation & Highly efficient.

• Application: Electric Power Transmission
• Material: Metal
• Frequency: 50/60 Hz
• Rated Voltage: Up to 415 V
• Rated Current: 4000 A
• Construction: Robust and Rigid
• Power Source: Electric

• Country of Origin: India
• Type: Fire Alarm
• Application: Industrial
• Color: Red
• Feature: Durable, Quality Assured

ACS355-03E-15A6-4

  AMF panel and generator packages are designed to provide emergency power during mains supply failure. During operation, the control panel of the AMF monitors the mains entering the building. If a mains failure occurs, the panel will disconnect the mains from the load, the generator is started and its output connected to the load. (The load being appliances, lights, etc in use within the house/office/factory at the time of mains failure). The generator continues to supply the building until the mains supply returns. The generator then automatically disconnects, stops and the mains is re-connected to the load. The AMF panel reverts to the standby mode ready to respond in case of another mains failure. Operation With the generator in 'Auto' mode, the incoming main is monitored continuously. If the mains voltage falls outside the preset limits, a 'mains failure' has occurred and the process of starting the generator set is initiated. Once the mains failure is recognised, the contacts are released to disconnect the load from the mains. The 'mains available' and 'mains on load' lamps extinguish. There is a pre-set and adjustable time delay before the generator is started. This avoids unnecessary starting of the generator when very short duration mains breaks occur e.g. 2 or 3 second breaks due to lightning strikes. After the delay, the engine fuel solenoid / ignition system is energised. A pre-heat period begins for generators fitted with indirect injection diesel engines. The choke is operated on petrol-engined sets. The starter motor relay energises and the engine is cranked for a pre-set period (typically 10 seconds). If the engine fires up and the speed increases through the 'crank-cut' threshold, then the starter motor is dis-engaged. Alternatively, if the engine does not start during the first crank period then the starter de-energises for an equal rest period before energising for another attempt. If the engine has not started after the last 'crank' period, then the engine fuel solenoid / ignition is de-energised and the generator is deemed to have failed to start and the appropriate annunciator is illuminated. Assuming that the generator has started during one of the attempts, the alternator output is checked to ensure that it is within specification. If so, then the generator contactor is energised and the load is supplied from the generator. In normal circumstances, the period from mains failure occurring to generator supply being connected is about 20 seconds. During generator operation, the engine oil pressure and temperatures are monitored and should an abnormality occur, the generator will immediately be shutdown and the appropriate annunciator illuminated. When the mains supply returns, the mains available lamp is illuminated within specified limits. The main is then monitored for a pre-set time to ensure that the supply is stable. The generator contactor is then de-energised and the mains contactor energised so that the mains supply is restored to the load. The 'alternator available' and 'alternator on-load' lamps extinguish and 'mains on load' lamp is illuminated. A short break in approximately 1 second occurs whilst the changeover is complete. The generator is 'run-on' for a cooling down period (adjustable up to 30 minutes) before the fuel solenoid / ignition system is de-energised and the engine stops. The operational cycle is then complete and the generator returns to a standby condition. During this time the starter battery is maintained in a charged condition by a 'trickle' charger supplied from the mains.