Acrylic Paints Dealers in Rajajinagar, Bangalore

• Application: Brush, Roller
• Packaging Type: Buckets
• Brand Name: Surfa
• Finish: Metallic Finish
• Spreading capacity: 65-70 square feet / Litre for 2 coats
• Paint Type: Emulsion
• Paint Base Type: Water Based Paint

Pearl Glow Metallic Finish Acrylic Emulsion Paint is a premium water based acrylic emulsion that provides luxurious and pearl glow metallic finish to the surface. Pearl Glow Premium Acrylic Emulsion - Metallic Finish can be applied on interior and exterior walls, ceilings, columns and paintable wall coverings. It can be applied on stucco, asbestos and wooden surfaces. This is a water based and non-hazardous paint, free from toxic ingredients, lead, mercury, etc.   Surface preparation Clean the surface thoroughly to render the surface free of previous paint coatings, loose particles, flaking, dust, dirt, oil, grease, etc., and wipe clean.   Directions for use On well dried and cleaned surface apply a coat of appropriate Surfalac Primer, depending on the surface and allow drying for 6-8 hours Smoothen the surface by filling dents with thin coat of appropriate Surfalac Putty, depending on the surface and allow drying for minimum 8 hours For painting interior walls follow the standard procedure/practice applicable to premium emulsion. Rectify the undulations and sand the surface with Emery Paper 180 and wipe clean Apply second coat of appropriate Surfalac Primer and allow it to dry for 6-8 hours. Sand the surface with Emery 320 grade and wipe clean Apply a coat of Surfa Acrylic Emulsion thinning 1 liter of paint with 450-500 ml of clean potable water as a base coat and allow drying for 5-6 hours Apply 2-3 coats (as required) of Pearl Glow Metallic Finish thinning with 5-10% of clean potable water Apply with brush followed by roller application allowing 4-6 hours interval between coats For Designer Pattern/Finish transfer the paint to roller tray and apply one coat followed by an appropriate tool to create the desired design effect/pattern finish   Other information Clean-up: Clean brushes, rollers and tools with warm soap water immediately after use Storage: Close tightly the container when not in use. Do not reuse the containers. Dispose of empty containers