Advance Cable Technologies (P) Limited (ACT) Kanak Nagar, Bangalore, Karnataka

In recent years many powerful wind power systems have been built worldwide. For cabling in these systems we can deliver specially manufactured cable for high power handling and control wiring. Photo-voltaic systems convert the energy of the sun directly into electric energy. The cable is UV-radiation and temperature resistant and can be used to connect individual solar cells and the range include Aluminium and Copper Power Cables, Rubber Cables which are torsion resistant and silicon cables etc.

SolidStranded Alloy conductors suitable for different types of thermocouples - Ex, Jx, Kx, Tx, Sx, Rx etc., insulated with PVCPEXLPEPTFE to form a core, Positive and negative cores twisted to form a pair, Pairs laid up & overall sheathed with PVCPELSZHPTFE. Shielding (BraidingLappingAluminium-Mylar Taping) will be provided individually on each pairtriad and overall or only overall depending upon the requirement. Armouring is provided depending upon the requirement with a extruded inner PVCPE sheath, and overall sheath of PVCPEXLPE. A wide selection of Thermocouple Extension and compensating cables is now available.

Application : Thermocouple cables are used to transmit signals from the thermocouple to the control unit using conductor materials which have the same e.m.f. output as that of thermocouple unit.

Annealed bare/tinned high conductivity copper. PVC/PE/Cellular PE insulated. Insulated cores twisted to form a pair. Pairs laidup in sub-units/units in concentric layers. Taped. Overall PVC sheathed. Individual and or overall shielding with Aluminium-Mylar tape/copper tape/lapping/braiding provided depending upon the requirement. Armouring provided with an extruded inner PVC/PE sheath and overall sheath of PVC/PE wherever required.   Application : For telephone switching Exchanges, Switch board & telephone wiring (MDF, SDH, DWDM, DSLAM etc.). Pulse code modulation systems. RS-232 Communication Systems and Digital Transmission networks & High Speed Data Transmission for BTS/BSC application in GSM/CDMA   TELECOMMUNICATION   Standard Specifications Switch Board Cables (both screened and unscreened), PCM Cables, Cat-5 Cables, digital cables and all types of cables for DDF, MDF etc., as per BSNL�S TEC Specifications, VDE:0815, 0816 /IEC:189 / IS:5608 & Customer Specifications.   Characteristics : Cable suitable for conductor operating temperature 70oC, 85oC & 105oC shall be provided on request.   Delivery Lengths : 250/500/1000 meters. Other lengths upon request. Wound on wooden drums of suitable size as per factory specification. Cable ends sealed by means of a non-hygroscopic sealing material. Custom packing and drums are also available on request.   Special Properties : Fire Retardant/Fire Retardant Low Smoke/Zero Halogen Low Smoke & Sheath material shall be supplied on request  

Cables are intended for photo-voltaic systems. The cables are UV radiation and temperature resistant, double insulated, halogen-free and can be used to connect individual solar cells. Because of their excellent weather resistance, the cables can also be installed outdoors, but not buried in the ground or laid in water. All cables are RoHS Compliant and recyclable.

Solid/Stranded (ATC / ABC ) copper conductor, insulated with PVC/PE/XLPE to form a core, 2 cores twisted to form a pair, 3 cores twisted to form a triad, 4 such elements depending upon the requirement will be laid to form a unit, such units laid up & overall sheathed with PVC/PE/LSZH. Shielding (Braiding/Lapping/Aluminium-Mylar Taping) will be provided individually on each pair/triad and overall or only overall depending upon the requirement. Armouring is provided depending upon the requirement with a extruded inner PVC/PE sheath, and overall sheath of PVC/PE/XLPE.   Application : Transmission of signals with minimum distortion & superior circuit isolation for systems like process control and Fire Alarm in Refineries, Chemical, Cement, Steel, Railways, Thermal and Gas Power Plants through microprocessors.   Standard Specification : IS : 5608, BS : 5308, IEC-189, VDE 0815, VDE 0816   Characteristics : Suitable for operation at 300 volts rms core to earth and 500 volts core to core. Cable suitable for conductor operating temperature 70�C. 85�C & 105�C will be provided on request.   Delivery Lengths : 500/1000 meters. Other lengths are upon request. Wound on wooden drums of suitable size as per factory specification. Cable ends sealed by means of a non-hygroscopic sealing material. Custom packing and drums are also available on request.   Special Properties : Fire Retardant/Fire Retardant Low Smoke/Zero Halogen Low Smoke/ Insulation and sheath materials shall be supplied on request. 

Annealed baretinned high conductivity copper. PVCPECellular PE insulated. Insulated cores twisted to form a pair. Pairs laidup in sub-unitsunits in concentric layers. Taped. Overall PVC sheathed. Individual and or overall shielding with Aluminium-Mylar tapecopper tapelappingbraiding provided depending upon the requirement. Armouring provided with an extruded inner PVCPE sheath and overall sheath of PVCPE wherever required.

Multistrandedsingle stranded Copper Conductors (Stranded conductors bunched), PVC insulated, flexible wires in different colours. MultiStrandedsingle stranded Copper conductor, PVC insulated, required number of Cores colour coded, laid up, overall jacketed with extruded polymers, Flexible cables, upto 1100 V grade. Fire Retardant (FR) Fire Retardant Low Smoke (FRLS) Zero Halogen Low Smoke (ZHLS), Insulation & Sheath material shall be supplied on request.

Multistranded/single stranded Copper Conductors (Stranded conductors bunched), PVC insulated, flexible wires in different colours MultiStranded/single stranded Copper conductor, PVC insulated, required number of Cores colour coded, laid up, overall jacketed with extruded polymers, Flexible cables, upto 1100 V grade   Application : Control Panels, Power supply, House service connections, street lighting, industrial installations etc.   Standard Specification : IS 694, IS:5608, BS:6004, BS:5308, IEC:227, IEC:61089 and Customer Specifications   Delivery Lengths : In coils of 100/200/500/1000 Metres and also in bobbins/wooden drums as required   Special Properties : Fire Retardant (FR)/ Fire Retardant Low Smoke (FRLS)/ Zero Halogen Low Smoke (ZHLS), Insulation & Sheath material shall be supplied on request.

Aluminum/Copper Conductors(Stranded conductors bunched in the form of of shaped or round), XLPE/PVC insulated, insulated cores laid up, extruded PVC inner sheathed, Overall extruded PVC sheathed. Galvanized mild steel armoring will be provided with wire/strip/tape over inner sheathed in case of armored cables.   Application : These Heavy Duty power cables are suitable for use in generating stations, sub-stations, distribution systems, house service connections, street lighting, industrial installation and operating conditions and tensile stresses when armoured, and can be laid in water or buried direct under the ground, even on steep slopes. They can also be installed indoors, in air or in cable ducts.   Identification : By cores of different colour insulation/number marked. By number marking sequentially on the cores by a contrast colour. The colour of insulation of all cores being the same. By alphabet marking sequentially on the cores The colour of insulation of all cores being the same. Other combinations of colour, numerals & alphabet coding as per customer specification/requirement.   Standard Specification : IS 1554 Part-1,IS:7098 Part-1,BS:6346,IEC:502, Customer Specification   Characteristics : Suitable for operation at voltage upto & including 1100 volts. Cable suitable for conductor operating temperature 70�C, 85�C & 105�C will be provided on request .   Delivery Lengths : 500/1000 meters. Other lengths are upon request. Wound on wooden drums of suitable size as per factory specification. Cable ends sealed by means of a non-hygroscopic sealing material. Custom packing and drums are also available on request.   Special Properties : Fire Retardant/ Fire Retardant Low Smoke/ Zero Halogen Low Smoke, Insulation & Sheath material shall be supplied on request.

Annealed BareTinned high conductivity copper (solid stranded ) PVCPEXLPE insulated. Insulated cores laid up in concentric layers. Extruded PVC inner sheathed, overall extruded PVCPEXLPE sheathed. Galvanised Mild steel armouring will be provided with wire strip tape over inner sheath in case of armoured cables.

Application : For electric control circuits & electric supplies.

Defence � Radar, Naval, Shipboard and submarine ( LFH wires and Cables, PTFE wires and cables,etc) Automotive � Under the hood( sensor throttle control, Fuel Injection), Exterior for Truck, Electric Vehicle, Wiring Harness,automotive wires and cables � FLRY, AVS, AVSS, Class A,B,C,D wires of ISO6722. Medical � Patient monitoring, Defriballators, Ultrasound, X-Ray Fire Alarm & protection � Fire Survival ( resistant). Industrial Automation � Bus Communication cables, Sensor control, Electronic Signals, RS 485, etc Special Cables for Underground Metro and Airports,Oil & Gas, Offshore � Seismic, logging, Fire Resistant,Spiral ( Coiled) Cables and cords,Plated wires in Tin, Silver and Nickel,Bunched Copper Wires

Solid/Stranded (ATC/ABC) Copper conductor, insulated with specially formulated PVC/TPE/XLPE to form a core. Cores laid up together or twisted to form a pair/triad depending upon the individual requirement. Such cores/pairs/triads after laying are coated with special Fire Resistant materials and overall sheathed with special PVC/TPE/LSZH. Shielding with Braiding/Aluminium mylar taping will be done overall or individually depending upon the requirement. Armouring provided depending upon requirement with a extruded inner special PVC/TPE sheath, and overall sheath of special PVC/TPE.   Application : To maintain circuit integrity during and after Fire   Identification : Shall be as per cable type Control/Instrumentation Signal/Thermocouple Extn./Compensating as per their respective features list. Other combinations of colour, numerals and alphabet coding will be provided as per customer satisfaction/requirement   Standard Specification : ICE 331/ BS 6387, IEC 60331, BS 6387 - CAT A,B,C,W,ZBS 7846 - CAT F1, F2, F3   Characteristics : Will withstand Flame temperature of 750 degree centigrade upto 3 hours without electrical breakdown at rated voltage. Does not produce noxious smoke & fumes which hinder fire fighting and endanger life. Does not propagate flame. Special properties: Zero Halogen Low Smoke insulation & sheath material supplied on request.   Delivery Lengths : 500/1000 meters. Other lengths are upon request. Wound on wooden drums of suitable size as per factory specification. Cable ends sealed by means of a non-hygroscopic sealing material. Custom packing and drums are also available on request.   Special Properties : Zero Halogen Low Smoke insulation & sheath material supplied on request

SolidStranded (ATCABC) Copper conductor, insulated with specially formulated PVCTPEXLPE to form a core. Cores laid up together or twisted to form a pairtriad depending upon the individual requirement. Such corespairstriads after laying are coated with special Fire Resistant materials and overall sheathed with special PVCTPELSZH. Shielding with BraidingAluminium mylar taping will be done overall or individually depending upon the requirement. Armouring provided depending upon requirement with a extruded inner special PVCTPE sheath, and overall sheath of special PVCTPE.

Solid/Stranded Alloy conductors suitable for different types of thermocouples - Ex, Jx, Kx, Tx, Sx, Rx etc., insulated with PVC/PE/XLPE/PTFE to form a core, Positive and negative cores twisted to form a pair, Pairs laid up & overall sheathed with PVC/PE/LSZH/PTFE. Shielding (Braiding/Lapping/Aluminium-Mylar Taping) will be provided individually on each pair/triad and overall or only overall depending upon the requirement. Armouring is provided depending upon the requirement with a extruded inner PVC/PE sheath, and overall sheath of PVC/PE/XLPE. A wide selection of Thermocouple Extension and compensating cables is now available.   Application : Thermocouple cables are used to transmit signals from the thermocouple to the control unit using conductor materials which have the same e.m.f. output as that of thermocouple unit.   Standard Specification : IS-8784, BS-1843, ANSI MC 96.1, IEC 584-3, JIS-C-1602, DIN 43710, VDE etc.   Delivery Lengths : 500/1000 meters. Other lengths are upon request. Wound on wooden drums of suitable size as per factory specification. Cable ends sealed by means of a non-hygroscopic sealing material. Custom packing and drums are also available on request.   Special Properties : Fire Retardant/Fire Retardant Low Smoke/Zero Halogen Low Smoke/Insulation and sheath materials shall be supplied on request.

ISO 6722 FLRY A, B Automotive standard cable with reduced insulation FLRYW Automotive standard cable heat resistant with reduced insulation FLY Automotive standard cable with PVC insulation, e.g. battery cables   Automotive standard cable with PP insulation   Automotive standard cable with crosslinked PE insulation ISO 14572 FLRYY Multi-core automotive cable with reduced insulation FLRYWYW Multi-core automotive cable heat resistant with reduced insulation FLR9Y11Y Multi-core automotive cable with reduced PP insulation and TPE-U sheath FLRYCY Multi-core automotive cable with reduced insulation and braiding of copper wires FLRYDY Multi-core automotive cable with reduced insulation and spiral shield of copper wires FLRYBY Multi-core automotive cable with reduced insulation and foil shield JASO D 609-90 Japanese Automobile Standard AV Vinyl insulated low tension electric cable for automobiles AVS Low tension cable with reduced outside diameter for automobiles, general wall thickness AVSS Low tension cable with reduced outside diameter for automobiles, thin wall thickness AVSSf Low tension cable with reduced outside diameter for automobiles, thin wall thickness, high flexibility