Air Dryers Dealers in Malleswaram, Bangalore

• Dryer Technology: Desiccant
• Dryer Horse Power: 10 HP
• Minimum Output Dew Point: -40 Deg C
• Maximum Pressure: 40 Bar
• Voltage: 240 V
• Drying Capacity: 21 - 50 cfm
• Brand: Atlas Copco

• Power Supply Volts / Hz: 220V/50-60 , 220V/50-60

Refrigeration dryers employ two heat exchangers, one for air-to-air and one for air-to-refrigeration. However, there is also a single Trisab heat exchanger that combines both functions. The compressors used in this type of dryer are usually of the hermetic type and the most common gas used is R-134a. The goal of having two heat exchangers is that the cold outgoing air cools down the hot incoming air and reduces the size of compressor required. At the same time the increase in the temperature of outgoing air prevents re-condensation. Most manufacturers produce "cycling dryers". These store a cold mass that cools the air when the compressor is OFF. When the refrigeration compressor runs, the large mass takes much longer to cool, so the compressor runs longer, and stays OFF longer. These units operate at lower dew points, typically in the 35–40 °F range. When selected with the optional "cold coalescing filter", these units can deliver compressed air with lower dew points.

No Electricity requirement. No moving parts - Maintenance free. Can be used in Hazardous area - Explosion proof. Performs better irrespective of external environments. No consumable (Refrigerants or Desiccants).

Membrane Dryers, nitrogen tyre inflators, Tractor Diesel Engine Compressors

Purpose: Stifling and Drying of Cocoons, Pupae and Silk waste Specifications:Capacity: 20 kg, 35 kg, 50 kg, 75 kg and 100 kg drying Capacity can be made. It can also be designed to Customer Requirement. 1. The Chamber is made of 18 gauge C. R Sheet outside and inside depending upon the capacity. Cocoon Trays are made of 1/2" Square G.I Mesh or Aluminum perforated trays depending upon the requirement. 2. The glass wool Insulation is provided on all the sides to prevent heat loss. 3. To Control the temperature, Electronic Digital Temperature Indicator with Controller or Blind Temperature Controller are provided to control and indicate Temperature as per the customer requirement. 4. For better air circulation inside the chamber, fan with suitable motor is provided. 5. The heating arrangement is provided by sheathed Air Heaters. For Safety M.C.B, Fuse, Starters and Thermal Overload Protection Relay for fan motors are provided. 6. The temperature Control accuracy is +/- 2°C and it is finished with heat resistant aluminum paint internal and external with Opaline Green color.

V c filters and fabricators is a well established manufacturer and supplier of high quality air dryer in india.

High Pressure Air Compressors, High Pressure Cleaner

air conditioning plants, Panel Cooler, moisture seperator

hot air drier, hopper feeder, Dosing Units, Extrusion

heatless air drier, refrigerated air drier